Best Screwdriver with Interchangeable Bits (2026): 5 Picks Compared

A door hinge works loose, a switch plate needs moving and the battery cover on a remote will not budge without the right tip. One drawer full of loose screwdrivers never seems to hold the size the job needs. The best screwdriver with interchangeable bits keeps the tips in one handle, so the next fastener is a quick swap away instead of another trip to the toolbox.

GarageToolHQ earns a commission when you buy through links on this page, at no extra cost to you. Read our affiliate disclosure.

Picks for the garage

#	Product	Shop Score	Buy
1	CRAFTSMAN Ratcheting Screwdriver, Multibit Set	9.7/10	Buy on Amazon
2	Klein Tools 32500 11-in-1 Screwdriver/Nut Driver	9.7/10	Buy on Amazon
3	Klein Tools 32315HD 15-in-1 Multi-Bit Ratcheting	9.7/10	Buy on Amazon
4	JOREST 25 in 1 Multi Screwdriver Set	9.6/10	Buy on Amazon
5	WORKPRO 12-in-1 Ratcheting Multi-Bit Screwdriver	9.6/10	Buy on Amazon

1

CRAFTSMAN Ratcheting Screwdriver, Multibit Set

CRAFTSMAN·9.7/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 26-piece ratcheting set with Phillips, slotted, square, hex and Torx bits, six nut drivers, a telescoping pick-up tool and a carrying case, backed by a full lifetime warranty.

Check price on Amazon

Pros

• Six nut drivers from 3/16 to 3/8 in on a 1/4 in drive
• Full lifetime warranty stated on the listing
• Telescoping pick-up tool included for dropped fasteners
• Speed and precision tactile zones plus a torque zone grip

Cons

• Listing calls it a 26-piece set while its parts list is headed (20) and (7)
• Spec table lists a weight of 0.000625 pounds, which the title and bullets do not support
• No bit material stated on the listing
• Case measures 13.4 by 12.2 by 9.3 in and needs shelf space

2

Klein Tools 32500 11-in-1 Screwdriver/Nut Driver

KLEIN TOOLS·9.7/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An 11-in-1 set with 8 bits in Phillips, slotted, Torx and square, three nut driver sizes and a cushion grip handle, backed by a 1 year manufacturer warranty.

Check price on Amazon

Pros

• Three nut driver sizes: 1/4, 5/16 and 3/8 in
• Blast finish bits for a firm hold and less cam-out
• Cushion grip handle for control and torque
• 1 year manufacturer warranty stated

Cons

• No ratchet action: a fixed handle only
• No hex bits listed
• No bit storage stated on the listing
• Replacement bits carry separate catalog numbers (32482 to 32485)

3

Klein Tools 32315HD 15-in-1 Multi-Bit Ratcheting

KLEIN TOOLS·9.7/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 15-in-1 ratcheting screwdriver with 7 double-ended ProFlex torsion zone tips, three ratchet positions and impact-rated bits that connect to a 1/4 in impact driver.

Check price on Amazon

Pros

• Impact-rated bits for heavy-duty applications
• Three ratchet positions: forward, fixed and reverse
• Seven double-ended ProFlex torsion zone tips
• Cushion grip handle for comfort and torque

Cons

• Bullets say fourteen driver tips while the bit list names more
• No warranty term stated: the listing says call vendor for warranty
• Impact driver sold separately
• 0.66 lb, heavier than the other Klein pick

4

JOREST 25 in 1 Multi Screwdriver Set

Jorest·9.6/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 25-in-1 multi screwdriver with 12 double-ended bits, a 4.53 in adjustable extension shaft and a magnetic 1/4 in bit holder, in a 6.22 in handle that weighs 5.29 oz.

Check price on Amazon

Pros

• Widest bit range here: Torx Security, Pozidriv and Triwing included
• 4.53 in adjustable extension shaft for deep and narrow spaces
• Bits labelled with model numbers and stored in the handle
• Compact at 6.22 in and 5.29 oz for a pocket or tool belt

Cons

• No warranty term stated on the listing
• No nut drivers included
• No ratchet action: a fixed handle only
• Spec table weight of 0.3527396192 pounds differs from the 5.29 oz in the bullets

5

WORKPRO 12-in-1 Ratcheting Multi-Bit Screwdriver

WORKPRO·9.6/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 12-in-1 ratcheting screwdriver with 6 double-ended S2 steel bits, a quick-load auto-locking mechanism and a slip-resistant ergonomic handle, at 0.28 lb.

Check price on Amazon

Pros

• Quick-load auto-locking mechanism for one-handed bit changes
• Ratchet with forward, reverse and locking positions
• Bits stored in the handle for carry
• S2 steel bits with a 1/4 in hex shank

Cons

• Fewest bits here, with 6 double-ended bits in the handle
• No warranty term stated on the listing
• No nut drivers included
• No extension shaft stated

Compared on paper

Every rating comes from the brand’s listing and is not a shop test (gathered 4 November 2026). Where a listing contradicts itself, both figures are shown.

How the points were given

Each screwdriver is scored out of 10 on performance, build, value, safety and warranty, with the weights published on the How We Pick page. No listing states a safety certification, so every pick scores zero on safety, and three of the five state no warranty term.

No score drops under 9.2 or climbs past 9.8; a tool’s place inside those bounds is set by its weighted point total. A tool with no power source and no listed safety feature has safety removed, and the score is taken over 90 points.

What the listings tell you

Five listings were compared. Three of the five have a ratcheting handle, and three include nut drivers alongside the bits. Two of the five state a clear warranty term, one year on the Klein 32500 and a full lifetime warranty on the CRAFTSMAN set, while the other three state no warranty term. None of the five states a safety certification. Two listings contradict themselves: the Klein 32315HD lists fourteen driver tips in its bullets while the bit list that follows names more tips than that, and the CRAFTSMAN set is called a 26-piece set while its included-parts list is headed (20) and (7).

Buying guide: choosing the best screwdriver with interchangeable bits

Bit types and sizes

Match the bit to the fastener. Phillips and slotted cover most household jobs, Torx and square recess suit appliance and automotive fasteners, and hex bits fit furniture and equipment bolts. The Jorest set lists the widest spread, with Torx Security, Pozidriv and Triwing alongside Phillips, flathead, hex and square, while the Klein 32500 keeps to Phillips, slotted, Torx and square. Count the sizes the listing names before buying, since a set that skips a size leaves that fastener untouched.

Nut drivers

A nut driver in the handle turns hex nuts and bolts without a separate socket set. The Klein 32500 converts to three nut driver sizes, 1/4, 5/16 and 3/8 in, the Klein 32315HD adds a 1/4 in nut driver, and the CRAFTSMAN set adds six nut drivers from 3/16 to 3/8 in on a 1/4 in drive. The other two picks carry bits only, so a job with hex fasteners needs a separate tool.

Ratchet and quick-load

A ratchet handle drives fasteners without lifting the tip out of the screw head. The Klein 32315HD, the WORKPRO and the CRAFTSMAN sets all ratchet, with the Klein offering forward, fixed and reverse positions and the WORKPRO adding a locking position and a quick-load mechanism that locks a bit in place with one hand. The Klein 32500 and the Jorest set are fixed handles, so every turn needs a fresh grip.

Handle and grip

A handle that fits the hand matters on a long job. Both Klein picks use a cushion grip, the WORKPRO uses a slip-resistant ergonomic grip, the CRAFTSMAN adds speed and precision tactile zones with a torque zone for grip, and the Jorest uses a dual-material handle in PP and ABS. Grip shape is a matter of hand size and habit, so the listing description is the best guide before buying.

Storage and carry

Bits stored in the handle stay with the driver instead of scattering across a drawer. The Jorest and WORKPRO sets store their bits in the handle, and the Jorest labels each bit with its model number for easy identification, while a screwdriver bit organizer keeps spare bits in order. The CRAFTSMAN set comes in a carrying case with its nut drivers and pick-up tool. Check the listed dimensions before buying, since the CRAFTSMAN case measures 13.4 by 12.2 by 9.3 in and needs real shelf space.

Garage Fit Check

• Bits live in the handle on the Jorest and WORKPRO sets, while the CRAFTSMAN set needs room for a carrying case that measures 13.4 by 12.2 by 9.3 in.
• No pick here needs power or a battery: all five are hand drivers, so there is nothing to charge before the first job.
• Check the bit list against the fasteners in the garage before buying: only the Jorest set lists Pozidriv and Triwing bits, and only the CRAFTSMAN set lists a telescoping pick-up tool.
• The Jorest set measures 6.22 in and weighs 5.29 oz, which suits a pocket, a tool belt or a kitchen drawer.

FAQ: garage tools

What does a screwdriver with interchangeable bits do?

It uses one handle with a set of swap-in bits, so one driver covers Phillips, slotted, Torx, square, hex and other fastener types. Each pick here swaps bits in the handle, and the sets run from 8 bits on the Klein 32500 to 12 double-ended bits on the Jorest set.

Do these screwdrivers take standard quarter-inch bits?

The Jorest set states that its 1/4 in bit holder applies to standard 1/4 in bits, and the WORKPRO bits use a 1/4 in hex shank. The other listings do not state a standard bit size, so check the listing before assuming a spare bit will fit.

What is a ratcheting screwdriver?

It lets the handle turn back without turning the screw, so fasteners go in and out without lifting the tip from the head. The Klein 32315HD, the WORKPRO and the CRAFTSMAN sets ratchet, and the Klein 32315HD offers forward, fixed and reverse positions.

Can I use these bits in an impact driver?

Only the Klein 32315HD states that its bits are impact rated and connect to a 1/4 in impact driver, which is sold separately. The other listings make no impact claim, so their bits should stay in the hand driver.

How do I keep track of so many bits?

The Jorest set labels each bit with its model number and stores the bits in the handle, the WORKPRO stores its bits in the handle, and the CRAFTSMAN set keeps everything in a carrying case. A set that stores its bits with the driver is harder to lose track of.

Related: the best screwdriver bit set with nut driver adapter, the best screwdriver bit organizer and the best cordless screwdriver with USB-C charging.