Best SDS Hammer Drill (2026): 5 Rotary Hammers Compared
Five SDS rotary hammers for concrete, brick and masonry, compared by impact energy, drilling capacity, modes and what comes in the box.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallENEACRO SDS-Max Rotary Hammer9.6/10View on Amazon - 2
Best Corded KitEnventor Rotary Hammer Drill9.6/10View on Amazon - 3
Best 5-Bit KitWORKPRO SDS-Plus Rotary Hammer Drill9.5/10View on Amazon - 4
Best CordlessBDJHMP SDS-Plus Rotary Hammer Drill9.5/10View on Amazon
A concrete wall, a brick chimney and a masonry anchor all ask for the same tool: a rotary hammer that pounds the bit forward while it spins. The best sds hammer drill pairs a strong impact with the right chuck, enough modes for drilling and chiseling, and a kit that covers the bits you need. This roundup compares SDS rotary hammers for concrete, brick and masonry, by impact energy, drilling capacity, modes and kit contents.
GarageToolHQ earns a commission when you buy through links on this page, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall ENEACRO SDS-Max Rotary Hammer: 9 ft-lbs of impact energy, 1-9/16 inch concrete capacity, safety clutch and a full kit. Check price on Amazon
- Best Corded Kit Enventor Rotary Hammer Drill: 13 amp motor with 6 joules, 4 modes, safety clutch and 3 bits plus 2 chisels in the case. Check price on Amazon
- Best 5-Bit Kit WORKPRO SDS-Plus Rotary Hammer Drill: 7.5 amp motor with 4 modes, 5 bits, a dust collector and a shock absorber at 7.5 lb. Check price on Amazon
- Best Cordless BDJHMP SDS-Plus Rotary Hammer Drill: Brushless motor with 2.6 joules and 4,500 BPM for DeWalt 20V MAX batteries, tool only. Check price on Amazon
Picks for the garage

ENEACRO SDS-Max Heavy-Duty Rotary Hammer Drill
An SDS-Max rotary hammer with a 13 amp motor, 9 ft-lbs of impact energy and a 1-9/16 inch capacity in concrete.
Pros
- 9 ft-lbs (12J) of impact energy for concrete, brick and masonry
- 1-9/16 inch drilling capacity in concrete
- Safety clutch and dual-layer anti-vibration system
- Full kit with a drill bit, a chisel and a tool bag
Cons
- 15.2 lb bare machine weight
- No-load speed of 500 r/min
- SDS-Max chuck takes SDS-Max bits only
- Service cover of 24 months rather than a stated warranty

Enventor Rotary Hammer Drill with Safety Clutch
A 13 amp SDS-Plus rotary hammer with 6 joules of impact energy, 4 modes and a safety clutch.
Pros
- 6 joules of impact energy with a 13 amp motor
- 4 modes for drilling, hammer drilling, chiseling and positioning
- Safety clutch guards the wrist when a bit jams
- 3 drill bits and 2 chisels in a carrying case
Cons
- 0-850 RPM top speed
- 6.56 ft power cord
- No weight stated on the listing
- 1-1/4 inch concrete capacity is smaller than the ENEACRO at 1-9/16 inch

AOBEN Rotary Hammer Drill with Vibration Control
A 13 amp SDS-Plus rotary hammer with 3 modes, a safety clutch and vibration control.
Pros
- 13 amp (1500W) motor for concrete, masonry and metal
- 3 modes: hammer only, hammer drill and drill only
- Safety clutch and vibration control
- 3 drill bits and 2 chisels in a carrying case
Cons
- No impact energy figure stated
- 12.0 lb weight
- Concrete capacity of 1-1/4 inch is smaller than the ENEACRO at 1-9/16 inch
- Included bits cover 8, 10 and 12 mm only

WORKPRO 1-1/4 Inch SDS-Plus Rotary Hammer Drill
A 7.5 amp SDS-Plus rotary hammer with 4 modes, 5 bits, a shock absorber and a dust collector, at 7.5 lb.
Pros
- 4 modes with a lock-on button and variable speed
- 5 SDS-Plus bits in the box
- Shock absorber and 360° rotatable handle
- Dust collector and depth gauge included
Cons
- 7.5 amp motor is the smallest here
- No impact energy figure stated
- Concrete capacity of 1 inch is the smallest here
- Heavier than the cordless BDJHMP at 5.07 lb

SDS-Plus Rotary Hammer Drill Compatible
A cordless SDS-Plus rotary hammer for DeWalt 20V MAX batteries, with a brushless motor and 2.6 joules, sold as tool only.
Pros
- Brushless motor with 2.6 joules and 4,500 BPM
- 4 modes for drilling, hammer drilling, hammer only and chisel
- Lowest weight here at 5.07 lb with a 360° handle
- 5 bits, 2 chisels, a depth gauge and gloves in the box
Cons
- Battery and charger are not included
- Works only with DeWalt 20V MAX batteries
- No concrete drilling capacity stated
- 2.6 joules is the lowest impact energy here
Other tools worth a look
Seesii 9 Amp SDS-Plus Lightweight Rotary Hammer Drill forCheck price on Amazon
DEWALT SDS Rotary Hammer DrillCheck price on Amazon
Berserker 1-9/16" SDS-Max Heavy Duty Rotary Hammer Drill forCheck price on Amazon
YOSIGHT SDS Plus Rotary Hammer Drill BitCheck price on Amazon
Compared on paper
| Model | Type | Impact energy | Max drilling in concrete | Modes | Weight |
|---|---|---|---|---|---|
| ENEACRO SDS-Max Rotary Hammer | SDS-Max, corded | 9 ft-lbs (12J) | 1-9/16 inch | 3 | 15.2 lb |
| Enventor Rotary Hammer Drill | SDS-Plus, corded | 6 joules | 1-1/4 inch | 4 | Not stated |
| AOBEN Rotary Hammer Drill | SDS-Plus, corded | Not stated | 1-1/4 inch | 3 | 12.0 lb |
| WORKPRO SDS-Plus Rotary Hammer Drill | SDS-Plus, corded | Not stated | 1 inch | 4 | 7.5 lb |
| BDJHMP SDS-Plus Rotary Hammer Drill | SDS-Plus, cordless | 2.6J | Not stated | 4 | 5.07 lb |
We copy each listing’s rated specs exactly as the manufacturer gives them; as of 18 November 2026. Where a listing contradicts itself, both figures are shown.
How the points were given
Each drill is scored on performance, build, value, safety and warranty, with the weights on our How We Pick page. All 5 state a safety feature such as a safety clutch or vibration control, and none states a warranty term.
| Product | Shop Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| ENEACRO SDS-Max Rotary Hammer | 9.6 | 32 | 21 | 20 | 8 | 0 |
| Enventor Rotary Hammer Drill | 9.6 | 30 | 21 | 20 | 8 | 0 |
| AOBEN Rotary Hammer Drill | 9.6 | 29 | 20 | 20 | 7 | 0 |
| WORKPRO SDS-Plus Rotary Hammer Drill | 9.5 | 28 | 20 | 20 | 7 | 0 |
| BDJHMP SDS-Plus Rotary Hammer Drill | 9.5 | 27 | 19 | 19 | 7 | 0 |
The displayed number is the weighted point total scaled linearly between 9.2 and 9.8. Earning more points is the only way up.
What the listings tell you
We read 5 rotary hammer listings. Only 3 state an impact energy figure, while all 5 name the chuck type and the modes. Only 1 states a weight under 6 lb.
Buying guide: choosing the best sds hammer drill
SDS-Plus or SDS-Max
SDS-Plus fits most home concrete and masonry work, and 3 kits here hold bits in 8, 10 and 12 mm. SDS-Max fits bigger holes: the ENEACRO here drills 1-9/16 inch in concrete with 9 ft-lbs behind it. Match the chuck to the bits you already own.
Impact energy
Impact energy is the punch behind each blow, given in joules or foot-pounds. The ENEACRO here gives 9 ft-lbs (12J), the Enventor gives 6 joules and the BDJHMP gives 2.6 joules, while the AOBEN and WORKPRO state no impact figure. Match the figure to the thickest material you drill.
Modes
3 or 4 modes cover most jobs: drill only for wood and steel, hammer drill for concrete and masonry, hammer only for chiseling, and a chisel position setting. All 5 drills here list hammer drill and hammer only modes.
Corded or cordless
4 drills here run on a cord, and the BDJHMP runs on a DeWalt 20V MAX battery that is not included. A corded drill runs as long as the job does, while a cordless drill moves freely. Check that you own a matching battery before you buy a tool-only drill.
Weight and handle
Weight runs from 5.07 lb on the cordless BDJHMP to 15.2 lb on the ENEACRO, with the AOBEN at 12.0 lb and the WORKPRO at 7.5 lb. A 360° handle turns to fit tight spaces, and every drill here has one.
Read the manual before first use, wear eye protection, keep the work area clear and ventilated, and stay within every stated rating. Read our Safety Disclaimer.
FAQ: garage tools
What size hammer drill bit for a 1/2 inch anchor?
The anchor maker states the bit size for its anchor, so check that first. The AOBEN, Enventor and WORKPRO drills list 1/2 inch as the largest hole in metal, and the ENEACRO lists 1-9/16 inch in concrete.
Can a demolition hammer drill?
A demolition hammer with a hammer drill mode can drill, and all 5 drills here list one. The AOBEN, ENEACRO and Enventor list hammer only for chiseling and demolition, while the WORKPRO and BDJHMP list hammer and chisel settings too.
What is a hammer drill bit?
A hammer drill bit has an SDS shank with slots that lock into the chuck and let the bit slide forward with each blow. 3 kits here hold bits in 8, 10 and 12 mm, and the WORKPRO kit holds 5 SDS-Plus bits.
How do I fit a bit in an SDS chuck?
Push the shank into the chuck until it seats, then pull the bit to check it is locked. Pull the chuck sleeve back to release the bit.
Related: power tools, drills and drivers, rotary hammer vs hammer drill, best rotary hammer bits, best heavy duty rotary hammer drill and best cordless rotary hammer. Also see our best concrete crack filler.




