Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Hammer Drill Bit Types and What Each Does

SDS Plus bits for rotary hammers, straight-shank masonry bits for percussion drills, and chisels for breaking work: the kinds of hammer drill bit in this guide.

Hammer Drill Bit Types and What Each Does
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1DEWALT Masonry Drill Bit Set, PercussionDEWALT Masonry Drill Bit Set, Percussion9.6/10View on Amazon
  2. 2TGFTGF 17-Piece SDS Plus Rotary Hammer Drill BitsTGFTGF 17-Piece SDS Plus Rotary Hammer Drill Bits9.6/10View on Amazon
  3. 3WORKPRO 16-Piece SDS-Plus Rotary Hammer Drill BitWORKPRO 16-Piece SDS-Plus Rotary Hammer Drill Bit9.6/10View on Amazon
  4. 4Sabre Tools 8-Piece 12in SDS Plus Drill BitsSabre Tools 8-Piece 12in SDS Plus Drill Bits9.6/10View on Amazon

A garage wall job usually starts with a mark on concrete and a drill that needs the right bit. Hammer drill bit types come down to the shank and the job: SDS Plus bits for rotary hammers, straight-shank masonry bits for percussion drills, and chisels for breaking and grooving. Match the shank to the drill first, then match the tip and the set to the material, and the hole goes where the mark is.

GarageToolHQ earns a commission when you buy through links on our product pages, at no extra cost to you. Read our affiliate disclosure.

Below: the kinds of hammer drill bit in this guide, how each one fits its drill, and the sets that cover them, ranked by Shop Score.

DEWALT Masonry Drill Bit Set, Percussion

DEWALT Masonry Drill Bit Set, Percussion

DEWALT9.6/10 Shop Score
i
The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 7-piece percussion masonry drill bit set with a 2 cutter carbide tip and a four flute design for concrete and block, backed by a 1 year full warranty.

Pros

  • 2 cutter carbide tip for longer bit life
  • Four flute design clears debris for fast drilling
  • Three flats on the shank stop slipping in the chuck
  • 1 year full warranty stated

Cons

  • Straight shank only; it does not fit SDS Plus rotary hammers
  • No chisels in the set
  • No storage case comes with the set
  • 7 pieces, fewer than the 16 and 17 piece sets in this guide
TGFTGF 17-Piece SDS Plus Rotary Hammer Drill Bits

TGFTGF 17-Piece SDS Plus Rotary Hammer Drill Bits

TGFTGF9.6/10 Shop Score
i
The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 17-piece SDS Plus rotary hammer drill bit and chisel set with YG8C carbide tips, a U-shaped flute and a storage case for concrete, brick and stone.

Pros

  • 12 drill bits in 4 sizes plus pointed, flat and tile chisels
  • YG8C carbide tips for hardness and wear resistance
  • U-shaped flute clears chips and dust fast
  • Storage case included for carrying and storage

Cons

  • No warranty term is stated
  • SDS Plus only; it does not fit a straight-shank percussion drill
  • Listed for light demolition and home projects, not heavy commercial work
  • 12 drill bits in 4 sizes, fewer sizes than the 8 in the Sabre set
WORKPRO 16-Piece SDS-Plus Rotary Hammer Drill Bit

WORKPRO 16-Piece SDS-Plus Rotary Hammer Drill Bit

WORKPRO9.6/10 Shop Score
i
The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 16-piece SDS-Plus rotary hammer drill bit and chisel set with YG8C carbide tips, a U-shaped flute and a storage case for concrete, stone and brick.

Pros

  • 9 drill bits plus 3 point chisels and 3 flat chisels
  • YG8C carbide for hardness and durability
  • U-shaped flute clears dirt fast and keeps the bit cooler
  • Storage case included, 11 in by 8-7/8 in by 2-3/8 in

Cons

  • No warranty term is stated
  • SDS Plus only; it does not fit a straight-shank percussion drill
  • 9 drill bits, fewer than the 12 in the TGFTGF set
  • No tile chisel for tile removal
Sabre Tools 8-Piece 12in SDS Plus Drill Bits

Sabre Tools 8-Piece 12in SDS Plus Drill Bits

Sabre Tools9.6/10 Shop Score
i
The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An 8-piece set of 12 in SDS Plus drill bits in sizes from 1/4 in to 1 in, with a 2-flute self-centering carbide tip for brick, stone, concrete, block and stucco.

Pros

  • Sizes from 1/4 in to 1 in, all 12 in long
  • 2-flute self-centering carbide tip for fast, accurate holes
  • Fits all SDS Plus rotary hammer drills
  • Optimized design clears material fast and keeps the bit cool

Cons

  • No chisels in the set
  • No storage case is included
  • 8 pieces, fewer than the 16 and 17 piece sets in this guide
  • Every bit is 12 in long, with no short bit for tight spots

Hammer drill bit types: the shank decides the fit

Every hammer drill bit in this guide has one of two shanks. SDS Plus bits lock into a rotary hammer, and the Sabre set below lists Bosch, DeWalt, Hitachi, Hilti, Makita and Milwaukee among the rotary hammers it fits. Straight-shank masonry bits grip in a standard chuck, and the DEWALT set below uses three flats on the shank to stop slipping in the chuck.

Chisels are the third kind in this guide, made for chipping and light demolition rather than drilling holes. The WORKPRO set carries point and flat chisels, and the TGFTGF set adds a tile chisel for tile removal, grooving and light demolition work.

Type Shank What it does Sets in this guide
SDS Plus drill bits SDS Plus Drill concrete, stone and brick Sabre Tools, WORKPRO, TGFTGF
Straight-shank masonry bits Three flats Drill concrete and block with a percussion drill DEWALT
Chisels SDS Plus Chip brick, concrete and stone WORKPRO, TGFTGF

The sets for each hammer drill bit type

Each set below handles one part of the job: percussion drilling, rotary hammer drilling in masonry, or chisels for breaking work.

Garage safety

Read the manual before first use, wear eye protection, keep the work area clear and ventilated, and stay within every stated rating. Read our Safety Disclaimer.

FAQ: garage tools

What is the difference between SDS Plus bits and straight-shank masonry bits?

SDS Plus bits lock into a rotary hammer, while straight-shank masonry bits grip in a standard chuck. The Sabre, WORKPRO and TGFTGF sets in this guide are SDS Plus, and the DEWALT set is a straight-shank percussion set with three flats on the shank.

Can I use SDS Plus bits in a regular hammer drill?

SDS Plus bits are made for SDS Plus rotary hammers, so a standard chuck will not take them. The Sabre set lists Bosch, DeWalt, Hitachi, Hilti, Makita and Milwaukee among the rotary hammers it fits.

What do the chisels in these sets do?

The chisels in these sets are made for chipping and light demolition rather than drilling holes. The TGFTGF chisels (on Amazon) are finely ground for tile removal, grooving and light demolition work, and the WORKPRO set pairs its point and flat chisels with drill bits for concrete, stone and brick.

Which set has a warranty?

The DEWALT set states a 1 year full warranty. The Sabre, WORKPRO and TGFTGF sets state no warranty term.

Do these sets come with a storage case?

The WORKPRO and TGFTGF sets come with a storage case. The Sabre set is bits only, and the DEWALT set lists no case.

Related: best hammer drill, best rotary hammer bits, types of drill bit, drill bit size guide and our cordless tools hub.

More buying guides

Cordless Tools ·

Step Drill Bit Sizes: Chart and Range

Step drill bit sizes run from 1/8 inch to 1-3/8 inch across the sets in this guide, with a bit covering many hole sizes…