Best Soldering Station with Vacuum Pump (2026)

A board with a stuck component and a joint that will not melt clean is where a desoldering station earns its place. The best soldering station with vacuum pump combines a soldering iron and a heated desoldering gun with a built-in vacuum, so melted solder is pulled away without juggling an iron and a separate pump.

GarageToolHQ earns a commission when you buy through links on this page, at no extra cost to you. Read our affiliate disclosure.

Picks for the garage

#	Product	Shop Score	Buy
1	WEP 948D III Upgraded 2-IN-1 ESD Safe Soldering	9.7/10	Buy on Amazon
2	WEP 948D-I 110W High Power Desoldering Station	9.6/10	Buy on Amazon
3	YIHUA 948D III Soldering Iron Desoldering Station	9.6/10	Buy on Amazon
4	110W 2-IN-1 Desoldering Station, PID Temperature	9.5/10	Buy on Amazon

1

WEP 948D III Upgraded 2-IN-1 ESD Safe Soldering

WEP·9.7/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 2-in-1 soldering and desoldering station with a 110W heating element, a fast-heating desoldering gun, and a stated 1-year USA technical support term.

Check price on Amazon

Pros

• 110W heating element heats fast, with PID compensation every 20 milliseconds
• 2-in-1 design lets the soldering iron and desoldering gun work at the same time
• 31 accessories listed, including 3 nozzles and 3 soldering tips
• ESD-safe stated, with sleep mode and automatic shutdown

Cons

• No separate desoldering temperature range is stated
• No preset channel count is stated for this model
• No tiltable display is stated for this model
• Dimensions of 9.76 by 5.94 by 4.96 inches need bench space

2

WEP 948D-I 110W High Power Desoldering Station

WEP·9.6/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A dedicated 110W desoldering station with 4 nozzles, 3 preset channels, a tiltable display, and a stated 1-year USA technical support term.

Check price on Amazon

Pros

• 110W desoldering gun for multilayer board desoldering without frequent de-clogging maintenance
• 4 nozzles: 0.8, 1.0, 1.2 and 2.0 mm
• 3 preset channels switch temperature with a single button
• Tiltable LCD display adapts to different workbench heights

Cons

• Not suitable for graphics card motherboards, as the listing states
• No soldering iron is listed, so it is desoldering only
• Rated for 110 to 127V only, do not connect to a 220V socket
• Weight of 6.75 pounds needs a stable bench spot

3

YIHUA 948D III Soldering Iron Desoldering Station

YIHUA·9.6/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 2-in-1 soldering and desoldering station with a 110W EVO soldering iron, a vacuum pump, and a stated 12-month US technical coverage term.

Check price on Amazon

Pros

• 110W EVO soldering iron with faster heat recovery by PID
• Soldering temperature 392 to 896°F and desoldering temperature 716 to 896°F
• 3 desoldering nozzles: 0.8, 1.2 and 2.0 mm, plus filters and cleaning pins
• Vacuum pump desoldering for continuous through-hole work without jam, as listed

Cons

• No ESD-safe term is stated in the listing
• No preset channel count is stated
• No tiltable display is stated
• Designed for 110 to 127V with a US-standard plug only

4

110W 2-IN-1 Desoldering Station, PID Temperature

GOORY·9.5/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 110W desoldering station with PID temperature control, 3 preset channels, a tiltable LCD, and an integrated desoldering pump for single-handed work.

Check price on Amazon

Pros

• 110W desoldering tool with consistent suction for multilayer boards
• PID program compensates for heat loss every 20 milliseconds
• 3 preset channels save the most-used temperature settings
• Tiltable LCD switches between Fahrenheit and Celsius displays

Cons

• No warranty term is stated in the listing
• No nozzle sizes are listed in the bullets
• Dimensions of 15.35 by 8.97 by 5.7 inches need more bench space than the other listings
• No soldering iron is listed, so it is desoldering only

Compared on paper

These numbers are the tool makers’ rated figures, as their listings print them on 2 November 2026.

How the points were given

Each station is scored on performance, build, value, safety and warranty, with the weights published on our How We Pick page. A stated ESD-safe term earns safety points, and a stated warranty term earns warranty points; where a listing states neither, those points stay at zero.

We map each tool’s weighted total onto a 9.2 minimum and 9.8 maximum in a straight line, so the point order and score order match.

What the listings tell you

All 4 stations list a 110W heating element, and all 4 list a desoldering temperature range or a soldering temperature range that covers desoldering work, with the dedicated desoldering stations listing 716 to 896°F. The 2-in-1 stations add a soldering iron with a temperature range of 392 to 896°F, so the same station can solder a joint and then pull solder away from it. Presets, sleep modes and displays separate the listings more than power does: WEP 948D-I and GOORY list 3 preset channels, WEP 948D-I and GOORY list a tiltable display, and sleep timers of 0 to 120 minutes appear on WEP 948D-I and GOORY, with standby after 30 minutes without reactivation.

Voltage is a hard limit on every listing here. YIHUA, WEP 948D-I and WEP 948D III list 110 to 127V with a US-standard plug, and WEP 948D-I and WEP 948D III state directly that the iron must not be connected to a 220V socket. Check the plug and the voltage before the first job, and do not use an adapter to force a different voltage.

How to choose the best soldering station with vacuum pump

Power and temperature

Power alone does not separate these listings, since all 4 list 110W. Temperature control does: the dedicated stations list 716 to 896°F for desoldering, the 2-in-1 stations list 392 to 896°F for soldering, and PID control, listed on WEP 948D III and GOORY, compensates for heat loss every 20 milliseconds to keep the temperature stable. For larger joints that need more heat, a 2-in-1 station lets the iron and the desoldering gun heat the joint together before the solder is pulled away.

Nozzles and presets

Nozzle count and size decide which boards a station fits. WEP 948D-I lists 4 nozzles at 0.8, 1.0, 1.2 and 2.0 mm, YIHUA lists 3 nozzles at 0.8, 1.2 and 2.0 mm, and WEP 948D III lists 3 nozzles at 1.0, 1.2 and 2.0 mm, while GOORY lists no nozzle sizes. Presets matter when the same temperatures come up again and again: WEP 948D-I and GOORY list 3 preset channels, while WEP 948D III and YIHUA state no preset count.

Sleep, standby and safety

Sleep and standby protect the heating element when the gun sits in its holder. WEP 948D-I and GOORY list a sleep timer of 0 to 120 minutes and standby after 30 minutes without reactivation, which cuts power to the heating element. ESD safety is stated on WEP 948D-I, WEP 948D III and GOORY, and is not stated on YIHUA, so a reader working on sensitive boards should weigh that difference. A metallic holder, listed on WEP 948D-I and WEP 948D III, keeps the gun from tipping over on the bench.

Garage Fit Check

• Bench space: WEP 948D III lists 9.76 by 5.94 by 4.96 inches, YIHUA lists 9.76 by 5.91 by 4.96 inches, and GOORY lists 15.35 by 8.97 by 5.7 inches, so GOORY needs the most bench room.
• Power: all listings here are for 110 to 127V with a US-standard plug, and WEP listings state not to connect to a 220V socket.
• Storage: WEP 948D-I and WEP 948D III list metallic holders for the desoldering gun, and all listings list cleaning pins, filters and a solder residue storage chamber.
• Before the first job, check the nozzle sizes, the preset channels, the sleep timer setting, and whether the listing states ESD safety and a warranty term.

FAQ: garage tools

What soldering station should I buy for through-hole desoldering?

A 2-in-1 station suits through-hole work with soldering as well, while a dedicated desoldering station suits frequent desoldering alone. YIHUA lists through-hole in-line sockets, LCD screens and nixie tubes, and WEP 948D-I lists frequent multilayer board desoldering, so match the station to the boards in front of you.

Do these stations work on multilayer boards?

Yes, for the listings that state it. WEP 948D-I lists multilayer board desoldering, including computer motherboards and ham radio circuit boards, and GOORY lists multi-layer PCBs, motherboards and heat-dissipating boards. WEP 948D-I also states that it is not suitable for graphics card motherboards.

What temperature range do these stations list?

Desoldering temperatures are listed at 716 to 896°F on WEP 948D-I, YIHUA and GOORY. Soldering temperatures on the 2-in-1 stations are listed at 392 to 896°F, and WEP 948D-I also lists 380 to 480°C alongside its Fahrenheit range.

Are these stations ESD-safe?

WEP 948D-I, WEP 948D III and GOORY list ESD-safe in their titles or bullets. YIHUA does not state an ESD-safe term in its listing, so a reader working on sensitive boards should check that point before buying.

What power supply do these stations need?

These listings are for 110 to 127V with a US-standard plug. WEP listings state not to connect the iron to a 220V socket, so check the voltage before plugging in.

Related: crimp vs solder connectors, best cordless soldering iron kit with case, and every diagnostics and electrical list.