Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Grease Fitting Repair Kit: Threads and Replacement

How to fix a grease fitting that will not take grease: match the thread, pick the angle, clear the joint or replace the zerk.

Grease Fitting Repair Kit: Threads and Replacement
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1KUBQLIG 110-Piece SAE Grease Fitting KitKUBQLIG 110-Piece SAE Grease Fitting Kit9.7/10View on Amazon
  2. 2Aitoper Zerk Grease Fittings Assortment KitAitoper Zerk Grease Fittings Assortment Kit9.6/10View on Amazon
  3. 3IPA Tools Innovative Products of America 7863IPA Tools Innovative Products of America 78639.6/10View on Amazon
  4. 4LockNLube® Coupler Rebuild Kit 3-Pack. ExtendLockNLube® Coupler Rebuild Kit 3-Pack. Extend9.6/10View on Amazon

A grease fitting that will not take grease usually has a clogged passage, a worn fitting, or a coupler that no longer seals on it, and a grease fitting repair kit is the set of parts that fixes it: a rejuvenator clears the clogged joint, a rebuild kit renews the coupler that feeds it, and a fitting assortment replaces the worn zerk itself. Match the thread and the angle to the fitting you remove, and the repair is a small job with a grease gun and a wrench.

GarageToolHQ earns a commission when you buy through links on our product pages, at no extra cost to you. Read our affiliate disclosure.

Below: what each kind of kit fixes, how to match the thread, and the gear that covers the job.

KUBQLIG 110-Piece SAE Grease Fitting Kit

KUBQLIG 110-Piece SAE Grease Fitting Kit

KUBQLIG9.7/10 Shop Score
i
The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 110-piece SAE grease fitting kit with 60 fittings in 1/4-28 UNF and 50 in 1/8-27 NPT, in straight, 45-degree and 90-degree profiles with a labeled six-compartment organizer.

Pros

  • 110 pieces: 60 in 1/4-28 UNF and 50 in 1/8-27 NPT
  • Straight, 45-degree and 90-degree profiles in both thread sizes
  • Six labeled compartments keep each group separated
  • 3-month warranty stated

Cons

  • Grease gun, wrench and caps are not included
  • Metric fittings are not included
  • No stated weight
  • Organizer case measures 8.0 by 4.01 by 1.0 in
Aitoper Zerk Grease Fittings Assortment Kit

Aitoper Zerk Grease Fittings Assortment Kit

Aitoper9.6/10 Shop Score
i
The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 27-piece metric zerk assortment in M6, M8 and M10, in straight, 45-degree and 90-degree angles, in a reinforced storage case with labeled compartments.

Pros

  • M6, M8 and M10 metric zerks in straight, 45-degree and 90-degree angles
  • Nickel-plated steel with rust and corrosion resistance
  • Ball-type inlet and spring-loaded check valve for dual sealing
  • Fitting caps included, in a reinforced case with labeled compartments

Cons

  • No SAE thread sizes included
  • 27 pieces cover fewer replacements than the 110-piece kit
  • No stated weight
  • Storage case measures 5.74 by 6.9 by 0.67 in
IPA Tools Innovative Products of America 7863

IPA Tools Innovative Products of America 7863

Innovative Products of America9.6/10 Shop Score
i
The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A grease joint rejuvenator master kit with a Professional Model and a Pocket Model, a 5-inch flex hose and an extra grease coupler, for unclogging and replenishing bearings and grease joints.

Pros

  • Includes Professional Model 7862 and Pocket Model 7864
  • 5-inch flex hose and an extra grease coupler included
  • Unclogs and replenishes bearings and grease joints
  • Made in USA

Cons

  • No warranty term stated
  • 1.5 lb listed weight
  • No fittings included for replacing a damaged zerk
  • Large size at 8.0 by 3.0 by 3.0 in
LockNLube® Coupler Rebuild Kit 3-Pack. Extend

LockNLube® Coupler Rebuild Kit 3-Pack. Extend

LockNLube9.6/10 Shop Score
i
The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 3-pack coupler rebuild kit that replaces the seal and steel jaws on a LockNLube grease coupler, with four hardened steel jaws and a threaded cone per kit.

Pros

  • Each kit includes four hardened steel jaws and a threaded cone
  • Replaces the seal and steel jaws to extend coupler life
  • Works with the standard or XL LockNLube Grease Coupler
  • 3-pack for repeated rebuilds

Cons

  • Fits LockNLube couplers only
  • No warranty term stated
  • No replacement fittings included
  • No stated weight

Grease fitting repair kit: what it fixes

A grease fitting, also called a zerk, is the small threaded nipple that lets a grease gun push grease into a joint. When it clogs or wears, grease comes back out around the coupler instead of going into the joint. A repair kit fixes that at the joint, at the coupler, or at the fitting itself: the IPA rejuvenator clears the clogged passage, the LockNLube rebuild kit renews the coupler jaws and seal, and the Aitoper and KUBQLIG assortments replace the fitting with a new one in the matching thread and angle.

Match the thread before you buy

Thread is the part that decides whether a new fitting screws in. The KUBQLIG kit covers SAE threads, with 60 fittings in 1/4-28 UNF and 50 in 1/8-27 NPT, while the Aitoper kit covers metric threads, with M6, M8 and M10 zerks. The KUBQLIG listing says to compare with the removed fitting or the equipment manual, and that metric fittings are not included. A fitting in the wrong thread can start crooked, cross-thread and damage the port, so check the old fitting first.

Angles and access

Straight fittings suit open lubrication points, while 45-degree and 90-degree fittings reach tight points where a straight fitting leaves no room for the coupler. Both the Aitoper and KUBQLIG kits include straight, 45-degree and 90-degree profiles, so the angle is a choice at the fitting, not another purchase. Pick the profile that gives the coupler clearance at the lubrication point.

The gear

The kits below cover each part of this repair: clearing a clogged joint, renewing a worn coupler, and replacing a worn fitting in the matching thread and angle.

Garage safety

Read the manual before first use, wear eye protection, keep the work area clear and ventilated, and stay within every stated rating. Read our Safety Disclaimer.

FAQ: garage tools

How do I know if my grease fitting is clogged or worn?

If grease comes back out around the coupler instead of going into the joint, the passage, the fitting or the coupler seal is the problem. The IPA rejuvenator clears a clogged joint, while a fitting that will not seal needs a new zerk in the matching thread.

What thread size is my grease fitting?

Compare the removed fitting with the equipment manual. The SAE threads in these kits are 1/4-28 UNF and 1/8-27 NPT, and the metric sizes are M6, M8 and M10. A fitting in the wrong thread can cross-thread and damage the port.

Do I need a 45-degree or 90-degree grease fitting?

Use a straight fitting where the coupler has room, and a 45-degree or 90-degree fitting where the lubrication point is tight. Both the Aitoper and KUBQLIG kits include all three angles, so you can match the angle to the point.

Can I rebuild a grease gun coupler instead of replacing it?

Yes, if you run a LockNLube coupler. The LockNLube rebuild kit replaces the seal and steel jaws, with four hardened steel jaws and a threaded cone in each kit, and it works with the standard or XL LockNLube Grease Coupler.

What is in a grease fitting assortment kit?

The KUBQLIG kit holds 110 fittings in 1/4-28 UNF and 1/8-27 NPT with a six-compartment organizer, and the Aitoper kit holds 27 metric fittings in M6, M8 and M10 with caps in a reinforced case. The KUBQLIG kit states that grease gun, wrench and caps are not included.

Related: grease fitting tap size thread chart, grease fitting dimensions in metric and SAE, the best grease gun for a tractor and lever vs electric grease gun. Also see our engine and shop equipment hub.

More buying guides

Engine and Shop Equipment ·

Best Grease Fitting Tap Kit (2026)

Five grease fitting kits from 100 to 405 pieces compared on thread sizes, angles, included tools and storage, using only what each listing states.

Engine and Shop Equipment ·

Grease Fitting Tap Size: Thread Chart

Match the tap to the fitting thread: a 1/8-27 NPT tap and R drill bit for 1/8-inch fittings, with 1/4-inch and metric M6 to…