Grease Fitting Tap Size: Thread Chart
Match the tap to the fitting thread: a 1/8-27 NPT tap and R drill bit for 1/8-inch fittings, with 1/4-inch and metric M6 to M10 fitting kits for the rest.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Drill America - POU1/8NPTW/DRILL 1/8" Carbon Steel9.7/10View on Amazon - 2
OURU 120PCS Grease Fittings Assortment Kit9.6/10View on Amazon - 3
60Pcs Zerk Grease Fittings Kit with Grease Gun9.6/10View on Amazon - 4
OURU 1/8"-27 SAE Grease Fittings Kit9.6/10View on Amazon
Grease fitting tap size is the size of the thread the tap cuts for the fitting, so the tap matches the fitting going into the hole. Pick the tap by the fitting’s stated thread, not just its size name: the 1/8-inch-27 fittings here take a 1/8-inch-27 NPT tap, and the drill bit that comes with the tap opens the hole for that thread. The 1/4-inch and metric fittings here state no thread form, so check the thread on the fitting before choosing a tap. The chart below lists the sizes the kits here state, and the gear section shows the tap set and the fitting kits that cover them.
GarageToolHQ earns a commission when you buy through links on our product pages, at no extra cost to you. Read our affiliate disclosure.
Below: the thread chart for grease fitting tap sizes, how to match a tap to a fitting, and the tap and fitting sets in this guide.

Drill America - POU1/8NPTW/DRILL 1/8" Carbon Steel
A 1/8-inch carbon steel NPT pipe tap with a matching R high speed steel drill bit in a plastic pouch.
Pros
- Matched 1/8-inch NPT tap and R drill bit in a set
- Carbon steel tap cleans and re-threads damaged pipe threads
- Black oxide HSS drill bit for production and maintenance jobs
- Plastic pouch keeps the tap and bit together
Cons
- 1/8-inch NPT only, no 1/4-inch or metric tap
- No grease fittings included, tap and bit only
- No wrench or caps in the set
- No warranty term is stated

OURU 120PCS Grease Fittings Assortment Kit
A 120-piece galvanized steel grease fitting assortment in 1/4-inch and 1/8-inch sizes, straight and angled, in a labeled storage case.
Pros
- 120 fittings in 1/4-inch and 1/8-inch sizes
- Straight, 45-degree and 90-degree fittings for different spots
- Galvanized steel resists corrosion, rust and oxidation
- Wrench kit and labeled case with partitions included
Cons
- No tap included, fittings only
- No caps listed with the fittings
- No warranty term is stated
- SAE sizes only, no metric fittings

60Pcs Zerk Grease Fittings Kit with Grease Gun
A 60-piece steel grease fitting kit in metric and SAE sizes with a quick-release grease gun coupler.
Pros
- Metric M6 to M10 and SAE 1/4-inch and 1/8-inch sizes in a kit
- Quick-release grease gun coupler included, stays attached for hands-free greasing
- 60 fittings for replacement and maintenance
- Steel fittings and coupler with a corrosion-resistant finish
Cons
- No tap included, fittings and coupler only
- No wrench in the kit
- No caps listed with the fittings
- Coupler fits standard zerk fittings only

OURU 1/8"-27 SAE Grease Fittings Kit
A 50-piece straight 1/8-inch-27 grease fitting kit with 10 caps and an 11mm wrench, in galvanized steel.
Pros
- 50 straight 1/8-inch-27 fittings for repeat jobs
- 10 caps in two materials protect the fittings
- 11mm wrench included for fitting changes
- Galvanized steel resists corrosion and oxidation
Cons
- Straight fittings only, no 45-degree or 90-degree angles
- No tap included, fittings only
- No storage case is included
- 1/8-inch size only, so a 1/4-inch or metric job needs another kit
Grease fitting tap size: the thread chart
The chart lists the fitting sizes the kits here state and the tap that goes with each size where the listings state one. The 1/8-inch size is the size the listings spell out in full: the OURU kit lists 1/8-inch-27 SAE fittings, and the Drill America set lists a 1/8-inch NPT tap with a matching R high speed steel drill bit.
| Fitting size | Tap size | Drill bit |
|---|---|---|
| 1/8-inch SAE | 1/8-inch-27 NPT | R high speed steel |
| 1/4-inch SAE | Tap matched to the 1/4-inch fitting | Not stated |
| Metric M6 to M10 | Tap matched to the fitting size | Not stated |
For the 1/4-inch and metric M6 to M10 sizes, the kits list the fittings and no tap, and they state no thread form for those sizes, so check the thread the fitting states before choosing a tap. The OURU 120-piece kit lists 1/4-inch and 1/8-inch fittings, and the Vfrikor 60-piece kit lists 1/4-inch, 1/8-inch and M6 to M10 fittings.
How to match a tap to a grease fitting
Match the tap to the fitting in a few steps, using the size the fitting states and the bit the tap set includes.
- Read the fitting size. The kits here list 1/8-inch, 1/4-inch and metric M6 to M10 fittings, so start with the size on the fitting or the kit label.
- Pick the tap by the fitting’s stated thread. A 1/8-inch-27 fitting takes a 1/8-inch-27 NPT tap, and the Drill America set is the tap set here for that size.
- Use the drill bit that comes with the tap. The Drill America set matches its 1/8-inch tap with an R high speed steel drill bit, so the bit and the tap come matched for the thread.
- Pick the fitting angle for the spot. The OURU 120-piece kit lists straight, 45-degree and 90-degree fittings in the same sizes, so the angle changes the reach, not the thread.
- Keep the wrench and caps with the kit. The OURU 1/8-inch-27 kit (on Amazon) includes an 11mm wrench and 10 caps for its 50 straight fittings.
Check the manual for the machine getting the fitting, and use the thread the fitting states rather than guessing from the grease gun.
The gear: tap and fitting sets
Matching the tap and the fitting takes the tap set for the thread and the fitting kits for the sizes, so the sets here cover the 1/8-inch tap, the 1/8-inch and 1/4-inch fittings, and the metric M6 to M10 sizes.
Read the manual before first use, wear eye protection, keep the work area clear and ventilated, and stay within every stated rating. Read our Safety Disclaimer.
FAQ: garage tools
What tap size goes with a 1/8-inch grease fitting?
A 1/8-inch-27 NPT tap. The Drill America set matches that tap with an R high speed steel drill bit, so the tap and the bit come matched for the thread.
What tap size goes with a 1/4-inch grease fitting?
The kits here list 1/4-inch fittings and no 1/4-inch tap, and they state no thread form for that size, so check the thread on the fitting before choosing a tap. The OURU 120-piece kit and the Vfrikor 60-piece kit list 1/4-inch fittings.
Does a 45-degree or 90-degree fitting need a different tap?
No. The angle is the fitting body, not the thread: the OURU 120-piece kit lists straight, 45-degree and 90-degree fittings in the same 1/4-inch and 1/8-inch sizes, so the angle changes the reach, not the thread size.
What drill bit goes with a 1/8-inch grease fitting tap?
The R high speed steel drill bit. The Drill America set matches its 1/8-inch NPT tap with that bit, so the bit and the tap come matched.
What sizes do grease fittings come in?
The kits here list SAE 1/4-inch and 1/8-inch sizes and metric M6 to M10 sizes. The OURU 120-piece kit covers the SAE sizes, and the Vfrikor 60-piece kit covers the metric and SAE sizes.
Related: grease fitting dimensions guide, how to load a mini grease gun, the best thread pitch gauge picks and the engine and shop equipment hub.




