Tap and Die Size Chart
A tap and die size chart that pairs metric sizes from M3 to M12, SAE sizes from #4 to 1/2 inch and the 1/8-27 NPT size with the right tap, die and pitch gauge for the job.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
toolant 127-Piece Metric & SAE Ratcheting Tap9.6/10View on Amazon - 2
OMT Tap and Die Set, SAE and Metric Thread Repair9.6/10View on Amazon - 3
60-Pc Master Tap and Die Set9.5/10View on Amazon - 4
GEARWRENCH 114 Piece Ratcheting Tap and Die Set9.4/10View on Amazon
A bolt comes out of a bracket with threads that look chewed, and the nut that came off it will not start again by hand. The hole needs a fresh internal thread, and the bolt needs a matching external thread, and both need to match in size and pitch or the joint will not hold. A tap and die size chart is the reference that pairs each thread size with its matching tap and die, so the repair starts with the right tool instead of a guess.
GarageToolHQ earns a commission when you buy through links on our product pages, at no extra cost to you. Read the affiliate disclosure.
Below: the chart for metric and SAE sizes, how to match a tap to a die, how to choose a set, and the sets that cover the sizes in the chart.

toolant 127-Piece Metric & SAE Ratcheting Tap
A 127-piece SAE and metric ratcheting tap and die set with drill bits matched to the taps and a double-layer toolbox.
Pros
- 127 pieces in SAE and metric sizes
- Ratcheting T handles, 5 degree swing arc
- Drill bits in corresponding sizes
- Double-layer toolbox with drawers
Cons
- 127 pieces to keep sorted
- Accessories carry a 180 day term, main body one year
- Ratcheting handles add moving parts
- Toolbox drawers need bench space

OMT Tap and Die Set, SAE and Metric Thread Repair
An 80-piece SAE and metric tap and die set with 68 taps and dies in coarse and fine threads from #4 to 1/2 inch and M3 to M12.
Pros
- 80 pieces, 68 taps and dies
- SAE #4 to 1/2 inch, metric M3 to M12
- High-carbon chromium bearing steel
- Gloves, wrenches, screwdrivers and gauges included
Cons
- Two separate cases to carry
- 34 sizes, so other sizes need another set
- 80 pieces include gloves and screwdrivers
- Sorting SAE and metric pieces takes care

60-Pc Master Tap and Die Set
A 60-piece SAE and metric tap and die set in GCr15 bearing steel, heat treated to Rockwell hardness 60 HRC.
Pros
- GCr15 bearing steel, 60 HRC hardness
- CNC machined, heat treated teeth
- Metric, SAE coarse, SAE fine and NPT
- Tapered teeth start threading more easily
Cons
- No warranty term is stated
- Hand drive only, no power tool use
- 60 pieces include handles and a case
- Metric sizes run M3 to M12 only

GEARWRENCH 114 Piece Ratcheting Tap and Die Set
A 114-piece ratcheting tap and die set in SAE and metric sizes, with die adapters for a 3/8 inch drive and 5 screw extractors.
Pros
- 114 pieces, 48 taps and dies
- Ratcheting T handles, 5 degree swing arc
- Twist lock guide keeps dies centered
- Die adapters for 3/8 inch drive
Cons
- The maker states no warranty for this set
- 48 taps and dies in a 114-piece set
- Sizes run to 3/4 inch and 18mm only
- Blow mold case needs bench space
Tap and Die Size Chart
Read the chart by thread size and pitch. A metric size is written with its pitch after the cross, such as M3x0.5, and an SAE size is written with its threads per inch after the dash, such as 4-40 NC. Match the tap and the die by the same size and the same pitch.
| Size | Thread type |
|---|---|
| M3x0.5 | Metric |
| M4x0.7 | Metric |
| M5x0.8 | Metric |
| M6x1.0 | Metric |
| M7x1.0 | Metric |
| M8x1.25 | Metric |
| M9x1.25 | Metric |
| M10x1.0 | Metric |
| M10x1.5 | Metric |
| M12x1.75 | Metric |
| 4-40 NC | Coarse |
| 6-32 NC | Coarse |
| 8-32 NC | Coarse |
| 10-24 NC | Coarse |
| 12-24 NC | Coarse |
| 1/4-20 NC | Coarse |
| 5/16-18 NC | Coarse |
| 3/8-16 NC | Coarse |
| 7/16-14 NC | Coarse |
| 1/2-13 NC | Coarse |
| 10-32 NF | Fine |
| 1/4-28 NF | Fine |
| 5/16-24 NF | Fine |
| 3/8-24 NF | Fine |
| 7/16-20 NF | Fine |
| 1/2-20 NF | Fine |
| 1/8-27 NPT | NPT |
The EFFICERE set includes the sizes above. The OMT set covers M3 to M12 and #4 to 1/2 inch, and the GEARWRENCH set covers to 3/4 inch and 18mm.
How to Match a Tap to a Die
A tap cuts an internal thread inside a hole, and a die cuts an external thread on a rod or a bolt. The tap and the die for one job share the same size and the same pitch. Check the pitch with a thread pitch gauge, then pick the tap and die that match the size and the pitch.
The OMT set includes thread pitch gauges, the EFFICERE set includes 2 thread pitch gauges, and the GEARWRENCH set includes SAE and metric thread gauges.
How to Choose a Tap and Die Set
Start with the size range. A set that covers metric sizes from M3 to M12 and SAE sizes from #4 to 1/2 inch covers the metric and SAE sizes in the chart above. The 1/8-27 NPT size in the chart is separate from those ranges, and the EFFICERE set includes a 1/8-27 NPT tap and die. A set that runs to 3/4 inch and 18mm covers larger threads.
The OMT set is made of high-carbon chromium bearing steel, and the EFFICERE set is made of GCr15 bearing steel, heat treated to Rockwell hardness 60 HRC. The EFFICERE set is designed for hand drive only. If a tap or die jams, the OMT usage note says to reverse direction to clear the chips and debris, and not to force it.
Tap and Die Sets That Cover the Chart
Each set below is an SAE and metric tap and die set for the sizes in the chart above.
FAQ: garage tools
What size tap and die set covers SAE and metric threads?
A set that covers metric sizes from M3 to M12 and SAE sizes from #4 to 1/2 inch covers both systems. The OMT and EFFICERE sets cover those ranges, and the GEARWRENCH set runs to 3/4 inch and 18mm.
What is the difference between a tap and a die?
A tap cuts an internal thread inside a hole, and a die cuts an external thread on a rod or a bolt. The two tools work as a pair for one thread size, so match the tap and the die by the same size and the same pitch.
Can a tap and die set repair a damaged thread?
Yes, a tap and die set can create new threads or repair damaged threads. The EFFICERE set repairs damaged threads on carbon steel, cast iron, aluminum, brass, copper and stainless steel.
Can I use a tap and die set with a power tool?
The EFFICERE set is designed for hand drive only, and the maker states not to use it with power tools, since power tools can deliver over torque and damage the threads.
Related: best drill and tap set, best cutting fluid for tap and die, grease fitting tap size and the engine and shop equipment hub.




