Best Drill and Tap Set (2026): 5 Picks Compared
Five combination drill and tap sets compared by SAE and metric sizes, material, coating, shank and storage case.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallAUTOTOOLHOME 13-Piece9.7/10View on Amazon - 2
Best Metric RangeValkynos 13-Piece9.6/10View on Amazon - 3
Best Industrial PickAUTOTOOLHOME 6-Piece9.6/10View on Amazon - 4
Best for Soft MetalDKIBBITH Black 6-Piece9.5/10View on Amazon
A bolt hole with stripped threads can stall a whole afternoon in the garage: a hinge that will not hold, a bracket that will not sit flat, a panel that keeps working loose. A combination bit that drills the hole and cuts the thread in the same pass turns that repair into a steady job at the bench. This guide compares the sets on this page to find the best drill and tap set for home garage work, covering SAE and metric sizes, materials, shanks and cases.
GarageToolHQ earns a commission when you buy through links on this page, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall AUTOTOOLHOME 13-Piece: 13 pieces in SAE and metric, HSS 4341 with titanium coating, plus a swivel case and a quick-change adapter. Check price on Amazon
- Best Metric Range Valkynos 13-Piece: 6 SAE and 6 metric sizes with every pitch listed, a quick-change adapter and a marked storage box. Check price on Amazon
- Best Industrial Pick AUTOTOOLHOME 6-Piece: HSS 4341 with titanium coating, stated for steel plates, aluminum and fabrication work. Check price on Amazon
- Best for Soft Metal DKIBBITH Black 6-Piece: Anti-rust black coating for aluminum, plastic, wood and thin soft metal panel, with a storage case. Check price on Amazon
Picks for the garage

13 Pack Titanium Drill Tap Bit Set
A 13-piece combination drill and tap set in HSS 4341 with a titanium coating, covering 6 SAE sizes from 6-32NC to 1/4-20NC and metric sizes from M3 to M10, with a storage case and a quick-change adapter.
Pros
- 13 pieces cover 6 SAE and 6 metric sizes
- HSS 4341 with titanium coating
- Drills, taps, deburrs and countersinks in one step
- Swivel storage case and quick-change adapter included
Cons
- Metric sizes stop at M10
- Weight is not stated
- One-step bits need a slow speed and lubrication, per the maker
- Combination bits cut one thread size each, so a damaged thread needs the matching bit on hand

Valkynos Drill Tap Set with Quick-Change Adapter
A 13-piece titanium combination drill and tap set with 6 SAE sizes from 6-32NC to 1/4-20NC and 6 metric sizes from M3 to M10, a quick-change adapter and a marked storage box.
Pros
- 13 pieces cover 6 SAE and 6 metric sizes
- Metric pitches listed, from M3 x 0.5 to M10 x 1.5
- Quick-change adapter for easy use and extended reach
- Storage box with marked compartments
Cons
- Metal plates over 1/4 inch thick are outside the stated range
- Needs cutting oil and a slow speed, per the maker
- Metric sizes stop at M10
- Storage box dimensions are not stated

AUTOTOOLHOME 6 Pack Titanium Drill Tap Bit Set
A 6-piece industrial grade titanium-coated HSS 4341 drill and tap set in SAE sizes from 6-32NC to 1/4-20NC, made for steel plates, aluminum and fabrication work.
Pros
- HSS 4341 with titanium coating, stated harder than standard HSS 4241
- Stated for steel plates, aluminum and fabrication work
- Drills, taps and countersinks in one step
- 6 sizes cover common SAE threads
Cons
- No warranty term is stated
- No storage case is stated
- Shank size is not stated
- Metric sizes are not included

6 Packs Titanium Combination Drill & Taps Bit Set
A 6-piece titanium combination drill and tap set in SAE sizes from 6-32NC to 1/4-20NC, with a 1/4 inch hex quick-change shank and a storage case.
Pros
- Drills, taps and countersinks in one step
- Engraved sizes for a quick pick
- 1/4 inch hex shank fits hand drills, impact drills, bench drills and screwdrivers
- Storage case included
Cons
- No warranty term is stated
- Stated for aluminum, plastic and soft material, not steel plate
- No steel grade is stated
- Weight is not stated

6 Packs Combination Drill & Taps Bit Set
A 6-piece combination drill and tap set with an anti-rust black coating, in SAE sizes from 6-32NC to 1/4-20NC, with a 1/4 inch hex shank and a storage case.
Pros
- Anti-rust black coating
- Engraved sizes for a quick pick
- Back taper helps prevent over-drilling and thread damage
- Storage case included
Cons
- Stated for aluminum, plastic, wood and thin soft metal panel only
- No steel grade is stated
- Needs a slow speed, straight alignment and lubrication, per the maker
- Combination bits cut one thread size each, so a damaged thread needs the matching bit on hand
Other tools worth a look
13 PCS Combination Drill and Tap Bit SetCheck price on Amazon
BOSCH BDT11S 11Piece Tap & Drill Combo SetCheck price on Amazon
DEWALT Drill Tap SetCheck price on Amazon
6-Piece 1/4-20NC Combination Drill Tap Bit Set SAECheck price on Amazon
Hi-Spec Small Electric ScrewdriverCheck price on Amazon
Compared on paper
| Model | Shop Score | Pieces | Sizes | Material | Shank | Case |
|---|---|---|---|---|---|---|
| AUTOTOOLHOME 13-Piece | 9.7/10 | 13 | 6 SAE, 6 metric (M3-M10) | HSS 4341, titanium coating | 1/4 in hex | Swivel case, adapter |
| Valkynos 13-Piece | 9.6/10 | 13 | 6 SAE, 6 metric (M3-M10) | HSS, titanium | 1/4 in hex | Storage box, adapter |
| AUTOTOOLHOME 6-Piece | 9.6/10 | 6 | 6 SAE | HSS 4341, titanium coating | Not stated | Not stated |
| DKIBBITH Titanium | 9.6/10 | 6 | 6 SAE | Titanium | 1/4 in hex | Storage case |
| DKIBBITH Black 6-Piece | 9.5/10 | 6 | 6 SAE | Anti-rust black coating | 1/4 in hex | Storage case |
Specs are the manufacturer’s ratings as listed, collected 18 November 2026.
How the points were given
Each set is scored out of 10 on performance, build, value, safety and warranty, with the weights published on the How We Pick page. None states a safety listing, so all score zero on safety, and none states a warranty term, so all score zero on warranty.
| Product | Shop Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| AUTOTOOLHOME 13-Piece | 9.7 | 32 | 22 | 21 | n/a | 0 |
| Valkynos 13-Piece | 9.6 | 30 | 21 | 21 | n/a | 0 |
| AUTOTOOLHOME 6-Piece | 9.6 | 29 | 21 | 20 | n/a | 0 |
| DKIBBITH Titanium | 9.6 | 28 | 20 | 20 | n/a | 0 |
| DKIBBITH Black 6-Piece | 9.5 | 27 | 20 | 19 | n/a | 0 |
Shop Scores range from a low of 9.2 to a high of 9.8, with each tool positioned by its weighted points proportionally, and more points always yields a higher score. A tool with no power source and no listed safety feature has safety removed, and the score is taken over 90 points.
What the listings tell you
Five drill and tap listings were read for this guide. Two sets hold 13 pieces and three hold 6. Four state a 1/4 inch hex shank, while the 6-piece AUTOTOOLHOME set does not state a shank size. Two sets state HSS 4341 with a titanium coating, and two more state a titanium coating or finish. None states a warranty term, and none states a safety listing.
Buying guide: the best drill and tap set for the home garage
SAE or metric sizes
Every set here covers the same six SAE sizes, from 6-32NC to 1/4-20NC. The two 13-piece sets add metric sizes from M3 to M10, and the Valkynos set lists each metric pitch, from M3 x 0.5 to M10 x 1.5. A garage that works on a mix of SAE and metric fasteners gets more use from a 13-piece set, while a garage that only turns SAE hardware can stop at six pieces.
Material and coating
Both AUTOTOOLHOME sets state HSS 4341 steel with a titanium coating, and the 6-piece set states that build for steel plates, aluminum and fabrication work. The Valkynos set states high-speed steel with a titanium combination. The DKIBBITH black set states an anti-rust black coating and lists aluminum, plastic, wood and thin soft metal panel as its materials. Match the set to the stock on the bench: sheet metal, mild steel and copper are listed for the 13-piece AUTOTOOLHOME set, while the DKIBBITH sets stay with softer material.
Shank and drill fit
Four sets state a 1/4 inch hex quick-change shank, which the makers list for an electric hand drill, an impact drill, a bench drill and an electric screwdriver. Engraved sizes on the DKIBBITH bits and clear size markings on the AUTOTOOLHOME 13-piece bits make the right size easy to pick from the case. The 6-piece AUTOTOOLHOME set does not state a shank size, so check the fit before ordering.
One-step bits and cutting oil
Each bit here drills, taps and countersinks in the same pass, and the 13-piece AUTOTOOLHOME set adds deburring to that list. The makers advise a slow speed, a straight line and lubrication, with cutting oil named in the Valkynos guidance along with cutting a little, retracting the bit and then cutting again. For tougher metals the Valkynos guidance calls for a pilot hole before the combination bit. A back taper on the DKIBBITH bits helps prevent over-drilling and damage to the thread.
Storage case
Four sets include a case or box. The 13-piece AUTOTOOLHOME set comes in a swivel case, the Valkynos set in a storage box with marked compartments, and both DKIBBITH sets in a portable storage case. The 13-piece AUTOTOOLHOME case measures 4.5 by 1.3 by 3.9 inches. The 6-piece AUTOTOOLHOME set states no case, so its bits need a home in the toolbox.
Read the manual before first use, wear eye protection, keep the work area clear and ventilated, and stay within every stated rating. Read our Safety Disclaimer.
Garage Fit Check
- Four of the five sets include a storage case or box; the 6-piece AUTOTOOLHOME set states no case, so plan a spot for its bits.
- Every set that states a shank uses a 1/4 inch hex shank, so it fits a hand drill, an impact drill, a bench drill or an electric screwdriver that takes that shank.
- The 13-piece AUTOTOOLHOME case measures 4.5 by 1.3 by 3.9 inches; check that a drawer or shelf slot holds a case of that size.
- Cutting oil is part of the job on metal, per the makers, so keep oil at the bench before the first hole.
- Combination bits suit metal up to 1/4 inch thick in the Valkynos listing; thicker stock needs a different approach.
FAQ: garage tools
What size drill bit for a 5/16 tap?
None of the five sets here lists a 5/16 tap. The largest SAE size in these sets is 1/4-20NC, and the largest metric size is M10, so a 5/16 thread needs a set that lists that size.
What size drill bit for a 1/8 NPT tap?
None of the five sets lists an NPT pipe thread size. Every size here is an NC machine thread or a metric machine thread, so a 1/8 NPT tap needs a pipe tap set that lists NPT sizes.
What size drill for a 1/4-20 tap?
A hand drill, an impact drill, a bench drill or an electric screwdriver with a 1/4 inch hex shank runs the 1/4-20NC bit in these sets. All five sets include the 1/4-20NC size, and the 6-piece AUTOTOOLHOME set is the one that does not state a shank size.
What size drill bit for a 1/4-20 tap?
The 1/4-20NC combination bit itself is the drill bit for that thread: it drills the hole and cuts the thread in the same pass, so no separate bit is needed. Run it slow, keep it straight and use cutting oil, as the makers advise.
What size drill bit for a 1/2 tap?
None of these sets covers a 1/2 tap. The largest SAE size here is 1/4-20NC, and the largest metric size is M10, so a 1/2 thread needs a larger tap set that lists that size.
Related: the best drill bits for metal and steel, the thread repair kit for oil pan, the bolt thread repair kit, the drill bit size guide and the best step drill bit. Also see the drills and drivers hub and the power tools hub.




