Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Drill Bits for Metal and Steel (2026)

Four M35 cobalt drill bit sets for stainless steel, cast iron, copper and aluminum, compared by size range, piece count and tip design.

Best Drill Bits for Metal and Steel (2026)
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1LingGan M35 Metric SetBest OverallLingGan M35 Metric Set9.6/10View on Amazon
  2. 2DelitonGude M35 SetBest Imperial SetDelitonGude M35 Set9.6/10View on Amazon
  3. 3SEDIANAS 15-Piece SetLargest SetSEDIANAS 15-Piece Set9.6/10View on Amazon
  4. 4SEDIANAS 13-Piece Set13-Piece Imperial SetSEDIANAS 13-Piece Set9.5/10View on Amazon

A bracket needs fresh holes, a hinge plate needs enlarging, and the steel on the bench is harder than the bits in the drawer look ready for. A dull bit wanders, squeals and heats up before it cuts, and the hole ends up oversize and rough. The best drill bits for metal and steel cut clean holes in hard stock without that fight, and this guide compares four cobalt sets by size range, piece count, tip design and the metals each maker names.

GarageToolHQ earns a commission when you buy through links on this page, at no extra cost to you. Read our affiliate disclosure.

Quick picks

  • Best Overall LingGan M35 Metric Set: 13 metric pieces from 1.5mm to 6.5mm in M35 cobalt steel with 5% cobalt, listed for stainless steel, iron, copper and aluminum. Check price on Amazon
  • Best Imperial Set DelitonGude M35 Set: 13 imperial sizes from 1/16 inch to 1/4 inch with a 135 tip and spiral groove for chip removal. Check price on Amazon
  • Largest Set SEDIANAS 15-Piece Set: 15 pieces from 1/16 inch to 3/8 inch in M35 cobalt steel, with a straight shank and an index storage case. Check price on Amazon
  • 13-Piece Imperial Set SEDIANAS 13-Piece Set: 13 pieces from 1/16 inch to 1/4 inch in M35 cobalt steel for hardened metal, stainless steel and cast iron. Check price on Amazon

Picks for the garage

Metric Cobalt Drill Bits Set 1.5-6.5mm 13PCS

Metric Cobalt Drill Bits Set 1.5-6.5mm 13PCS

LingGan9.6/10 Shop Score
i
The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 13-piece metric cobalt set, 1.5mm to 6.5mm, in M35 high-speed steel with 5% cobalt, listed for stainless steel, iron, copper and aluminum in a mechanical or hand drill.

Pros

  • M35 cobalt steel with 5% cobalt for wear resistance in hard metals
  • 13 sizes from 1.5mm to 6.5mm cover small holes in fine steps
  • Listed for stainless steel, cast iron, copper and aluminum
  • Heat resistance stated for high-temperature work

Cons

  • Metric sizes only, so imperial holes need a separate set
  • Largest bit is 6.5mm, so bigger holes need a larger set
  • Straight shank fits standard chucks, with no quick-change option for fast swaps
  • No storage case is named, so the bits need a home in the toolbox
DelitonGude 1/16-1/4inch HSS M35 Cobalt Twist

DelitonGude 1/16-1/4inch HSS M35 Cobalt Twist

DelitonGude9.6/10 Shop Score
i
The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 13-size imperial cobalt set, 1/16 inch to 1/4 inch, in M35 high-speed steel with 5% cobalt, with a 135 tip and twist design for steels, cast iron and stainless steel.

Pros

  • M35 cobalt steel with 5% cobalt for wear resistance in hard metals
  • 135 tip with twist design for self-centring and faster cutting
  • Spiral groove design for chip removal
  • 13 imperial sizes from 1/16 inch to 1/4 inch cover the common fractional sizes

Cons

  • Imperial sizes only, so metric holes need a separate set
  • Largest bit is 1/4 inch, so bigger holes need a larger set
  • No storage case is named, so the bits need a home in the toolbox
  • Wood and plastic are named alongside metals, so this is a general set rather than a metal-only set
Cobalt Drill Bit Set - 15Pcs M35 HSS Twist Drill

Cobalt Drill Bit Set - 15Pcs M35 HSS Twist Drill

SEDIANAS9.6/10 Shop Score
i
The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 15-piece M35 cobalt twist drill bit set from 1/16 to 3/8 in, with a 135 degree split point, straight shank and an index storage case.

Pros

  • 15 pieces from 1/16 to 3/8 in, with two each of the three smallest sizes
  • 135 degree split point is self-centering and prevents walk-off
  • Fully ground twist design clears particles faster and cuts friction and heat
  • Index storage case with the size marked for each bit

Cons

  • Largest bit is 3/8 in, so larger holes need a different cutter
  • No warranty term is stated
  • Only one each of the sizes above 3/32 in, so no spares there
  • Round straight shank, with no flat for the chuck to grip
Cobalt Drill Bit Set - 13Pcs M35 HSS Twist Drill

Cobalt Drill Bit Set - 13Pcs M35 HSS Twist Drill

SEDIANAS9.5/10 Shop Score
i
The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

13-piece M35 cobalt HSS twist bit set, 1/16 to 1/4 in, with a 135 degree split point and an orange plastic case.

Pros

  • M35 cobalt HSS with Cobalt 5% for heat resistance
  • 135 degree split point for precise, faster drilling
  • Fully ground twist design clears particles faster
  • Orange plastic case with size index for organizing

Cons

  • No warranty term is stated
  • Range stops at 1/4 in, so larger holes need another set
  • No weight or dimensions are stated
  • No safety listing is stated

Other tools worth a look

Compared on paper

Model Shop Score Size range Pieces Material Tip Suited metals
LingGan M35 Metric Set 9.6/10 1.5mm to 6.5mm 13 M35 cobalt Not stated Stainless steel, iron, copper, aluminum
DelitonGude M35 Set 9.6/10 1/16 inch to 1/4 inch 13 M35 cobalt 135 tip Steels, cast iron, stainless steel
SEDIANAS 15-Piece Set 9.6/10 1/16 inch to 3/8 inch 15 M35 cobalt Not stated Hardened metal, stainless steel, cast iron
SEDIANAS 13-Piece Set 9.5/10 1/16 inch to 1/4 inch 13 M35 cobalt Not stated Hardened metal, stainless steel, cast iron

Specifications are manufacturer rated, as published by each maker and collected 15 November 2026.

How the points were given

Each set is scored on performance, build, value, safety and warranty, with the weights published on our How We Pick page. No set here states a safety certification or a warranty term, so safety and warranty score zero across the four picks, and the ranking turns on the stated size range, materials and tip design.

Product Shop Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
LingGan M35 Metric Set 9.6 29 21 20 n/a 0
DelitonGude M35 Set 9.6 28 20 20 n/a 0

Shop Scores range from a low of 9.2 to a high of 9.8, with each tool positioned by its weighted points proportionally, and more points always yields a higher score. Only powered tools, or tools with stated safety features, get safety points. Everything else is rated out of 90.

What the listings tell you

All four sets are M35 cobalt steel, and all four name stainless steel among the metals they suit. The metric set covers small sizes in millimetres, while the imperial sets cover the common fractional sizes. Tip design, shank style and the full list of suited metals vary from set to set, so the size range and the metals named for each set are the figures to compare.

Buying guide: best drill bits for metal and steel

Cobalt steel and the 5% cobalt claim

All four sets are M35 high-speed steel with 5% cobalt, a blend the makers link to wear resistance and heat resistance. Cobalt steel holds an edge longer than plain high-speed steel in hard metals, which matters when the bit has to cut stainless steel or cast iron rather than glide through soft stock. The cobalt share is the same across the four sets, so it does not separate them; the size range and tip design do.

Metric or imperial sizes

The LingGan set runs 1.5mm to 6.5mm in 13 pieces, while the imperial sets run 1/16 inch to 1/4 inch or 1/16 inch to 3/8 inch. Match the set to the holes the job needs: metric sizes suit tapped holes and hardware sized in millimetres, while fractional sizes suit the common imperial drill sizes found in a home garage. A set that stops at 1/4 inch leaves larger holes to another set, so check the largest size before ordering.

Tip design and chip clearing

The DelitonGude set states a 135 tip with a twist design and a spiral groove, which the maker links to self-centring and chip removal. A self-centring tip wanders less on a hard surface, and a spiral groove clears chips out of the hole as the bit cuts. The other sets state no tip angle, so a buyer who drills a lot of stainless steel may favour the set that names its tip design.

Piece count and storage

Piece counts run 13 or 15 across the four sets, and the 15-piece set adds an index storage case. A case keeps the sizes in order and stops small bits from wandering around a drawer, which matters when the difference between sizes is a fraction of an inch. Sets without a named case still need a home in the toolbox, so plan storage before the first job.

Which metals each set suits

Stainless steel, cast iron, copper and aluminum appear across the four sets, and some sets add wood and plastic. A set that names the metal the job uses is the safer pick than a set that leaves it out, so match the metals named for each set against the stock on the bench before choosing.

Once the holes are drilled, a carbide burr bit cleans up the edges, and the types of drill bit guide explains where twist bits fit among the rest.

Garage safety

Read the manual before first use, wear eye protection, keep the work area clear and ventilated, and stay within every stated rating. Read our Safety Disclaimer.

Garage Fit Check

  • Check the size range before ordering: the metric set runs 1.5mm to 6.5mm, while the imperial sets run 1/16 inch to 1/4 inch or 1/16 inch to 3/8 inch.
  • Straight-shank bits fit a standard drill chuck, so check the chuck on the drill before the first job.
  • The 15-piece set comes with an index storage case; plan a spot in the toolbox for the sets that name no case.
  • Keep cobalt bits with the metalworking bits, away from the wood bits, so the right set is at hand for steel.
  • Count the pieces on arrival against the size range, so a missing size shows up before the job starts.

FAQ: garage tools

What are the best drill bits for metal and steel?

M35 cobalt twist bits suit the job: all four sets here are M35 high-speed steel with 5% cobalt, and all four name stainless steel among the metals they suit. Pick by size range, metric or imperial, and by whether the set names its tip design.

Do cobalt drill bits work on stainless steel?

Yes. All four sets name stainless steel among the metals they suit, and the makers link the cobalt blend to wear resistance and heat resistance in hard metals. Keep the speed down and the bit cool, and let the bit cut rather than forcing it.

What size drill bits do I need for metal?

It depends on the hole. The metric set runs 1.5mm to 6.5mm, while the imperial sets run 1/16 inch to 1/4 inch or 1/16 inch to 3/8 inch, so match the set to the holes the job needs and check the largest size before ordering.

Can I use these drill bits in a hand drill?

Yes. The metric set is listed for a mechanical or hand drill, and straight-shank bits fit a standard drill chuck. A drill press holds the work steadier, but a hand drill works for the same holes with care.

Do I need a different bit for each metal?

Not with these sets. Each set names several metals, stainless steel, cast iron, copper and aluminum among them, so the same set covers the common garage metals. Match the metals named for the set against the stock on the bench before choosing.

Related: the types of drill bit guide, the best drill bit for steel picks, the best drill bits for stainless steel picks, the best step drill bit guide and the best drill bit set picks.

More buying guides