Best Drill Bits for Stainless Steel (2026): 5 Picks Compared
M35 cobalt drill bit sets and a carbide hole saw kit for stainless steel, compared by size range, piece count, split point and storage case.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallSinyeenglon M35 99-Pc9.7/10View on Amazon - 2
Best RangeSEDIANAS M35 15-Piece9.6/10View on Amazon - 3
Best Single SizeDrill Hulk M35 12-Pack9.5/10View on Amazon
A stainless bracket needs new holes, and the old bit skates across the surface, dulls, and leaves a scorched ring instead of a clean cut. Stainless steel work-hardens under a dull edge, so the bit matters more than the drill. This guide compares the best drill bits for stainless steel: M35 cobalt twist sets and a carbide hole saw kit, ranked by size range, piece count, point and case.
GarageToolHQ earns a commission when you buy through links on this page, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall Sinyeenglon M35 99-Pc: 99 pieces from 1/16 to 3/8 in, M35 cobalt with hardness stated up to 67, and a plastic index case with sizes printed on the lid. Check price on Amazon
- Best Range SEDIANAS M35 15-Piece: 15 pieces from 1/16 to 3/8 in with a 135 degree split point, a round straight shank and an index storage case. Check price on Amazon
- Best Single Size Drill Hulk M35 12-Pack: 12 pieces of 1/4 in M35 cobalt with a 135 degree split point, a 3-flat shank and a case. Check price on Amazon
Picks for the garage

Sinyeenglon Cobalt Drill Bits Set for Hardened
A 99-piece M35 cobalt twist drill bit set covering 1/16 to 3/8 in, with a plastic index storage case and a maker-stated hardness up to 67.
Pros
- 99 pieces across 1/16 to 3/8 in, with spares in the small sizes
- M35 cobalt with hardness stated up to 67 and a life up to 12 times the average HSS titanium coated bit, per the maker
- Fully ground twist design clears particles faster and cuts friction and heat
- Hard plastic case with sizes printed on the lid for compartmentalized storage
Cons
- Largest bit is 3/8 in, so larger holes need a different cutter
- No warranty term is stated
- The maker says to use cutting fluid to keep the bit cool, and none is included
- 16 pieces each of the two smallest sizes may outnumber what a home garage uses

Cobalt Drill Bit Set - 15Pcs M35 HSS Twist Drill
A 15-piece M35 cobalt twist drill bit set from 1/16 to 3/8 in, with a 135 degree split point, straight shank and an index storage case.
Pros
- 15 pieces from 1/16 to 3/8 in, with two each of the three smallest sizes
- 135 degree split point is self-centering and prevents walk-off
- Fully ground twist design clears particles faster and cuts friction and heat
- Index storage case with the size marked for each bit
Cons
- Largest bit is 3/8 in, so larger holes need a different cutter
- No warranty term is stated
- Only one each of the sizes above 3/32 in, so no spares there
- Round straight shank, with no flat for the chuck to grip

19 PCS (1/2" to 2-1/8") Carbide Hole Saw Kit
A 19-piece hole saw kit with 13 carbide hole saws, titanium pilot drills and L-wrenches for metal holes from 1/2 inch to 2-1/8 inches.
Pros
- 13 hole saws from 1/2 inch to 2-1/8 inches, plus 3 titanium pilot drills and 3 L-wrenches
- Titanium-plated cemented carbide teeth for metal
- Listed for stainless steel, iron and aluminum
- Fits handheld drills and stand drilling machines
Cons
- Not recommended for tile, glass, concrete or stone
- Coolant is required during continuous high-speed drilling
- No warranty term is stated

1/4-Inch Cobalt Steel M35 Jobber Length Twist
A 12-pack of 1/4 in M35 cobalt jobber-length twist drill bits with a 135 degree split point and a 3-flat shank, in a case.
Pros
- 12 pieces of the same 1/4 in size, so spares are on hand
- M35 cobalt with 5% cobalt for higher heat resistance
- 135 degree split point with a 3-flat shank
- Can be repeatedly sharpened, as the hardness runs through the material
Cons
- One size only: every bit is 1/4 in
- No cutting fluid is included
- 2-3/4 in flute length limits how deep a hole can run in one pass
- Suits hard metal, so it is more bit than a softwood job needs

Cobalt Drill Bit Set - 13Pcs M35 HSS Twist Drill
13-piece M35 cobalt HSS twist bit set, 1/16 to 1/4 in, with a 135 degree split point and an orange plastic case.
Pros
- M35 cobalt HSS with Cobalt 5% for heat resistance
- 135 degree split point for precise, faster drilling
- Fully ground twist design clears particles faster
- Orange plastic case with size index for organizing
Cons
- No warranty term is stated
- Range stops at 1/4 in, so larger holes need another set
- No weight or dimensions are stated
- No safety listing is stated
Other tools worth a look
Metric Cobalt Drill Bits Set 1.5-6.5mm 13PCSCheck price on Amazon
Metric M42 8% Cobalt Twist Drill Bits Set for Stainless SteelCheck price on Amazon
DYRECELVE 10-Piece Phillips Bits #2 ImpactCheck price on Amazon
DCWecher 12-Pack Phillips Bits #2 Impact MagneticCheck price on Amazon
EZUVITA 6PC Titanium-Coated Spade Drill BitsCheck price on Amazon
Compared on paper
| Model | Shop Score | Material | Size range | Pieces | Point | Case |
|---|---|---|---|---|---|---|
| Sinyeenglon M35 99-Pc | 9.7/10 | M35 cobalt | 1/16 to 3/8 in | 99 | Not stated | Plastic index case |
| SEDIANAS M35 15-Piece | 9.6/10 | M35 cobalt, 5% cobalt | 1/16 to 3/8 in | 15 | 135 degree split | Index storage case |
| Drill Hulk M35 12-Pack | 9.5/10 | M35 cobalt, 5% cobalt | 1/4 in | 12 | 135 degree split | Case included |
| SEDIANAS M35 13-Piece | 9.5/10 | M35 cobalt | 1/16 to 1/4 in | 13 | Not stated | Not stated |
| METOTY TCT 19-Piece | 9.6/10 | Carbide (TCT) | 1/2 to 2-1/8 in | 19 | Not stated | Not stated |
Every rating comes from the brand’s listing and is not a shop test (gathered 14 November 2026).
How the points were given
Each bit is scored out of 10 on performance, build, value, safety and warranty, with the weights published on the How We Pick page. No listing states a safety listing or a warranty term, so safety and warranty add nothing across the picks, and the ranking turns on the stated sizes, piece counts, point and case.
| Product | Shop Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Sinyeenglon M35 99-Pc | 9.7 | 32 | 21 | 21 | n/a | 0 |
| SEDIANAS M35 15-Piece | 9.6 | 30 | 21 | 20 | n/a | 0 |
| Drill Hulk M35 12-Pack | 9.5 | 28 | 20 | 19 | n/a | 0 |
No score drops under 9.2 or climbs past 9.8; a tool’s place inside those bounds is set by its weighted point total. A tool with no power source and no listed safety feature has safety removed, and the score is taken over 90 points.
What the listings tell you
Five listings were compared. Four are M35 cobalt twist drill bit sets, and one is a carbide hole saw kit. The twist sets cover 1/16 to 3/8 in, with 12, 13, 15 and 99 pieces, and two state a 135 degree split point. The hole saw kit covers 1/2 to 2-1/8 in with 19 pieces. No listing states a warranty term, and none states a safety listing. For the wider family of bits, see the types of drill bit guide.
Buying guide: best drill bits for stainless steel
Cobalt M35 and heat
All four twist sets here are M35 cobalt, and the Drill Hulk and SEDIANAS 15-piece sets state 5% cobalt. The maker of the Drill Hulk bits links the cobalt to higher heat resistance and red hardness, and the Sinyeenglon maker states hardness up to 67 with a life up to 12 times the average HSS titanium coated bit. Cobalt costs more than plain high-speed steel, so save it for stainless steel, cast iron and hard sheet.
Split point and walk-off
A 135 degree split point is self-centering and prevents walk-off, per the SEDIANAS maker, and the Drill Hulk bits state the same 135 degree split point. A bit that starts on the mark keeps the hole where the bracket needs it. The Sinyeenglon set states no point angle, so check before ordering if a split point matters to the job.
Size range and spares
The twist sets run from 1/16 in up to 3/8 in, except the SEDIANAS 13-piece set, which tops out at 1/4 in. The Sinyeenglon set holds 99 pieces, with 16 each of 1/16 and 5/64 in, so spares of the small sizes are on hand. The SEDIANAS 15-piece set holds two each of the three smallest sizes. The Drill Hulk pack holds 12 pieces of 1/4 in only, which suits a garage that drills that size again and again. For holes above 3/8 in, see the best step drill bit picks or the hole saw kit below.
Speed and cutting fluid
The Sinyeenglon maker gives a speed range of 200 to 1000 rpm and says to hold the bit vertical to the workpiece and to use cutting fluid to stay cool and make the bit last longer. Low speed and fluid suit stainless steel, which hardens under heat and a dull edge. Keep a bottle of cutting fluid on the bench before the first hole.
When a hole saw fits better
Twist bits in this roundup stop at 3/8 in. The METOTY kit is a carbide hole saw set from 1/2 to 2-1/8 in, with a titanium pilot bit and an L-wrench, listed for stainless steel, iron and aluminum. A hole saw cuts the large holes a twist bit cannot reach, such as a cable or pipe pass-through in a stainless panel.
After the holes are drilled, a best drill bit for steel roundup covers the wider steel family.
Read the manual before first use, wear eye protection, keep the work area clear and ventilated, and stay within every stated rating. Read our Safety Disclaimer.
Garage Fit Check
- The Sinyeenglon case measures 7.9 by 7.7 by 1.4 in, so leave a shelf slot for it.
- Check the shank before the first hole: the Drill Hulk bits use a 3-flat shank, and the SEDIANAS 15-piece set uses a round straight shank.
- Keep cutting fluid on hand: the Sinyeenglon maker says to use it and to hold the bit vertical at 200 to 1000 rpm.
- Check the size range first: the largest twist bit here is 3/8 in, and only the METOTY hole saw kit reaches 2-1/8 in.
- Store the sets in their cases: the Sinyeenglon and SEDIANAS 15-piece sets come with index cases, with sizes printed on the Sinyeenglon lid.
FAQ: garage tools
What drill bit is best for stainless steel?
An M35 cobalt twist bit with a 135 degree split point, such as the picks in this guide. The top pick is the Sinyeenglon 99-piece set, which covers 1/16 to 3/8 in with a maker-stated hardness up to 67.
Do I need a split point for stainless steel?
It helps: a 135 degree split point is self-centering and prevents walk-off, per the SEDIANAS maker, and the Drill Hulk bits state the same point. A bit that starts on the mark keeps the hole where it belongs.
What speed should I drill stainless steel at?
The Sinyeenglon maker gives 200 to 1000 rpm, with the bit held vertical to the workpiece and cutting fluid used to stay cool. Low speed and fluid suit stainless steel, which hardens under heat and a dull edge.
Can I use these drill bits on wood and plastic?
The SEDIANAS sets and the Sinyeenglon set list wood and plastic among their uses, along with hardened metal, stainless steel and cast iron. The Drill Hulk pack is listed for hard metal, including stainless steel.
What size hole can I drill with these sets?
The twist bit sets reach 3/8 in at most, and the SEDIANAS 13-piece set stops at 1/4 in. For larger holes, the METOTY carbide hole saw kit covers 1/2 to 2-1/8 in.
Related: the best drill bit for steel, the best step drill bit, the types of drill bit guide, the best drill bit set, the best hole drill bit set, the best quick change drill bit set, the best carbide burr bits for metal, the best drill press X Y table, the best cut off wheel for stainless steel, the best buffing wheel for stainless steel, the best tube bender for stainless steel and the drills and drivers hub. Also see our best impact driver. Also see our drill hammer. Also see our right angle drilling. Also see our impact driver drill. Also see our drill and tap set. Also see our electric torque wrench. Also see our hammer drill sds.




