Best Right Angle Drill (2026): 4 Cordless Picks Compared
Cordless right angle drills compared by chuck size, speed range, voltage, weight and warranty, for drilling and driving in tight corners.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallDEWALT DCD740B9.6/10View on Amazon - 2
Best Compact 12VMilwaukee 2415-209.5/10View on Amazon - 3
Best Heavy-DutyMilwaukee 2807-209.4/10View on Amazon - 4
Best DeWalt-CompatibleADOTOCAM ZJ-001Z9.4/10View on Amazon
A joist bay with a hole to drill and no room to swing a straight drill is where a right angle drill earns its keep: the chuck sits at a right angle to the body, so the drill slips between joists and studs where a standard drill cannot reach. This guide compares the best right angle drill picks for tight corners, ranking each one by chuck size, speed range, voltage, weight and warranty.
GarageToolHQ earns a commission when you buy through links on this page, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall DEWALT DCD740B: Dual speed ranges of 0-650/0-2000 rpm, a 4.0 in body, a 3/8 in ratcheting chuck and a 3 Year Limited Warranty. Check price on Amazon
- Best Compact 12V Milwaukee 2415-20: 11 clutch settings, built-in LEDs, a fuel gauge and a 2.25 lb weight in a 12V bare tool. Check price on Amazon
- Best Heavy-Duty Milwaukee 2807-20: 18V brushless Hole Hawg with a 1/2 in chuck for larger bits and heavier boring work. Check price on Amazon
- Best DeWalt-Compatible ADOTOCAM ZJ-001Z: Up to 400 in-lb of torque, dual speeds of 0-500 rpm and 0-1900 rpm, and a 3.8 in body that runs on DeWalt 20V batteries. Check price on Amazon
Picks for the garage

DEWALT DCD740B 20-Volt MAX Li-Ion Right Angle
A 20V MAX right angle drill with a 3/8 in ratcheting chuck, dual speed ranges of 0-650/0-2000 rpm, a 4.0 in front-to-back length, a multi-grip trigger and a belt hook, sold as a tool only.
Pros
- Dual speed ranges of 0-650/0-2000 rpm cover fastening and drilling
- 4.0 in front-to-back length fits tight spaces
- 3/8 in ratcheting chuck with a deep hex pocket takes a 2 in (50 mm) hex bit
- 3 Year Limited Warranty and a belt hook with 2 Phillips bits in the kit
Cons
- Batteries not included, so a 20V MAX battery is needed before the first job
- 3.25 lb weight is heavier than the 2.25 lb Milwaukee 2415-20
- No LED work light is stated
- No torque figure is stated

Milwaukee 2415-20 M12 12-Volt Lithium-Ion Cordless
A 12V cordless right angle drill with a 3/8 in single-sleeve ratcheting chuck, an electronic clutch with 11 settings plus drill mode, an extended paddle switch, built-in LEDs and an on-board fuel gauge, sold as a bare tool.
Pros
- Electronic clutch with 11 settings plus drill mode gives fine control
- Built-in LEDs light the work surface and show when the clutch is out
- On-board fuel gauge shows remaining run time on the M12 battery pack
- 2.25 lb weight is the lowest stated weight of the picks
Cons
- 12V platform gives less power than the 18V and 20V picks
- Bare tool: no battery is included
- No warranty term is stated beyond Manufacturer Warranty
- No speed range is stated

M18 Fuel GEN II 18V Lithium-Ion Brushless Cordless
An 18V brushless cordless 1/2 in Hole Hawg right angle drill with a 7.7 lb weight and a 15.6 in x 3.7 in x 6.5 in body, sold as a tool only.
Pros
- 1/2 in chuck takes larger bits than the 3/8 in picks
- 18V brushless motor from the M18 FUEL GEN II line
- 15.6 in long body for work across wide framing
- Tool-only format suits owners who already own M18 batteries
Cons
- 7.7 lb weight is the heaviest of the 4 picks
- No speed range is stated
- No torque figure is stated
- No warranty term is stated beyond Manufacturer Warranty

Brushless Right Angle Drill Compatible with DeWalt
A brushless right angle drill that works with DeWalt 20V batteries, with a 3/8 in ratchet chuck, dual-speed adjustment of 0-500 rpm and 0-1900 rpm, up to 400 in-lb of torque and a built-in LED light, sold without a battery.
Pros
- Up to 400 in-lb (45 Nm) of torque, the only torque figure stated in this roundup
- Dual-speed adjustment of 0-500 rpm and 0-1900 rpm
- 3.8 in front-to-back length is the smallest stated length here
- Works with DeWalt 20V batteries owners may already own
Cons
- No battery is included, so a DeWalt 20V battery is needed
- No weight is stated
- 3/8 in chuck takes smaller bits than the 1/2 in Milwaukee 2807-20
- Fits DeWalt 20V batteries only, so owners of other battery platforms need a new battery
Other tools worth a look
DEWALT Right Angle AttachmentCheck price on Amazon
Makita DA3010F 3/8" Angle DrillCheck price on Amazon
Ingersoll Rand 7807R 3/8" Reversible Air Angle Drill Max freeCheck price on Amazon
SUNTECH SM-709R Sunmatch 3/8" Reversible Pneumatic Angle DrillCheck price on Amazon
Titan 16189 90-Degree Magnetic Right Angle Drill AttachmentCheck price on Amazon
Right Angle DrillCheck price on Amazon
Compared on paper
| Model | Shop Score | Chuck | Speed range | Voltage | Weight | Warranty |
|---|---|---|---|---|---|---|
| DEWALT DCD740B | 9.6/10 | 3/8 in | 0-650/0-2000 rpm | 20V | 3.25 pounds | 3 Year Limited Warranty |
| Milwaukee 2415-20 | 9.5/10 | 3/8 in | Not stated | 12V | 2.25 pounds | Manufacturer Warranty |
| Milwaukee 2807-20 | 9.4/10 | 1/2 in | Not stated | 18V | 7.7 pounds | Manufacturer Warranty |
| ADOTOCAM ZJ-001Z | 9.4/10 | 3/8 in | 0-500 rpm and 0-1900 rpm | 20V | Not stated | Not stated |
We copy each listing’s rated specs exactly as the manufacturer gives them; as of 14 November 2026.
How the points were given
Each drill is scored on performance, build, value, safety and warranty, with the weights published on the How We Pick page. None states a UL, ETL or CSA listing, so all score 0 on safety, and only the DEWALT gives a clear warranty term.
| Product | Shop Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| DEWALT DCD740B | 9.6 | 30 | 22 | 21 | 0 | 3 |
| Milwaukee 2415-20 | 9.5 | 29 | 21 | 20 | 0 | 0 |
| Milwaukee 2807-20 | 9.4 | 29 | 21 | 19 | 0 | 0 |
| ADOTOCAM ZJ-001Z | 9.4 | 28 | 20 | 20 | 0 | 0 |
The displayed number is the weighted point total scaled linearly between 9.2 and 9.8. Earning more points is the only way up.
What the listings tell you
The 4 listings in this roundup state a weight in 3 cases, a speed range in 2 cases and a clear warranty term in 1 case. None states a safety listing, and 3 of the 4 picks use a 3/8 in chuck while the 1/2 in Milwaukee Hole Hawg stands apart on chuck size.
Buying guide: the best right angle drill for your garage
Chuck size
3 of the 4 picks use a 3/8 in chuck, and the Milwaukee 2807-20 uses a 1/2 in chuck for larger bits. The DEWALT deep hex pocket lets a 2 in (50 mm) hex bit sit fully inside the chuck.
Speed range
Dual speed ranges give a low range for fastening and a high range for drilling. The DEWALT runs 0-650/0-2000 rpm and the ADOTOCAM runs 0-500 rpm and 0-1900 rpm, while the Milwaukee listings state no speed range.
Voltage and battery
The Milwaukee 2415-20 runs on 12V, the Milwaukee 2807-20 on 18V, and the DEWALT and the ADOTOCAM on 20V. The DEWALT and the ADOTOCAM are sold as a tool only, and the ADOTOCAM runs on DeWalt 20V batteries.
Length and weight
Front-to-back length decides whether a drill fits between joists: the ADOTOCAM measures 3.8 inches and the DEWALT 4.0 inches. Weight runs from 2.25 pounds for the Milwaukee 2415-20 to 7.7 pounds for the Milwaukee 2807-20, with the DEWALT at 3.25 pounds.
What comes in the box
The DEWALT kit includes the drill, a belt hook and 2 Phillips bits, with batteries not included. The Milwaukee picks are sold as a bare tool and a tool only, and the ADOTOCAM ships without a battery.
Read the manual before first use, wear eye protection, keep the work area clear and ventilated, and stay within every stated rating. Read our Safety Disclaimer.
Garage Fit Check
- Measure the gap before ordering: the smallest stated front-to-back length here is 3.8 inches, and the longest stated body is 15.6 inches.
- Match the battery platform: the DEWALT and the ADOTOCAM need a 20V battery, the Milwaukee 2807-20 needs an 18V battery, and the 2415-20 needs a 12V battery.
- Plan storage for a tool-only purchase: none of the 4 picks ships with a battery, so keep the matching battery and charger with the drill.
- Check the chuck before the first job: 3 of the 4 picks use a 3/8 in chuck, and only the Milwaukee 2807-20 uses a 1/2 in chuck.
FAQ: garage tools
What is a right angle drill?
A right angle drill has its chuck set at a right angle to the body, so it drills and drives where a straight drill cannot fit, such as between joists and studs. The picks here run from a compact 12V drill to an 18V Hole Hawg, with chucks in 3/8 in and 1/2 in.
How to use a DeWalt right angle drill attachment?
Fit the bit in the 3/8 in ratcheting chuck, pick the low range for fastening and the high range for drilling from the 0-650/0-2000 rpm dual speed ranges, and hold the multi-grip trigger from the side that fits the gap.
How do right angle drill attachments work?
The head turns the drive through a right angle, so the chuck spins across the body instead of along it. A multi-grip trigger and a variable speed trigger let the drill run in tight spots while the grip stays in reach.
How to use an angle drill guide?
Line the guide up with the hole position and hold the drill square to the surface. The 3.8 in and 4.0 in front-to-back lengths on the picks here help the drill sit square in a tight bay.
How to use a right angle drill attachment?
Chuck the attachment in a drill, set the speed for the job, and guide the right angle head into the gap while keeping the drill body clear of the work. The multi-grip trigger on the DEWALT and the variable speed trigger on the ADOTOCAM keep the trigger in reach in tight spots.
Related: the best cordless drill under 100, the best hammer drill, the types of drill bit and the corded vs cordless drill. Also see the drills and drivers. Also see the wall mount holder for cordless drill. Also see the best cordless drill for auto mechanics.




