Best Drill Bits for Aluminum (2026): 4 Compared
Step bits and twist bits for aluminum compared by point angle, flute, shank and size range, so you can match the bit to the hole.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallJEFE HEX 9-Piece Twist9.6/10View on Amazon - 2
Best Step BitsIRONANT 5-Piece Step9.6/10View on Amazon - 3
Cobalt SpareSEDIANAS M35 15-Piece9.6/10View on Amazon - 4
Hex Shank SpareHariendny 8-Pack HSS9.6/10View on Amazon
An aluminum bracket that needs a clean hole and a drill that walks across the surface is the usual Saturday job, and the best drill bits for aluminum are the bits that start where you put them and clear chips without grabbing. We compared step bits and twist bits by point angle, flute, shank and size range, using only what each listing publishes.
GarageToolHQ earns a commission when you buy through links on this page, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall JEFE HEX 9-Piece Twist: 9 sizes from 1/16 to 3/8 in, 135° split point, 3-flat shank Check price on Amazon
- Best Step Bits IRONANT 5-Piece Step: 50 sizes in 5 pieces, spiral flute, TiAlN coating, aluminum case Check price on Amazon
- Cobalt Spare SEDIANAS M35 15-Piece: 15-piece M35 cobalt set, 1/16 to 3/8 in, index case Check price on Amazon
- Hex Shank Spare Hariendny 8-Pack HSS: 8-pack titanium coated HSS bits, 3 to 10 mm, hex shank Check price on Amazon
Picks for the garage

JEFE HEX 9-Piece Twist Drill Bits Set,3 Flat Shank
A 9-piece HSS twist bit set from 1/16 to 3/8 in with a 135° split point, parabolic flute and 3-flat shank for aluminum and other metals.
Pros
- 9 sizes from 1/16 to 3/8 in cover small to mid-size holes
- 135° split point for clean, accurate holes with less lock-up
- Parabolic flute clears chips fast and keeps the bit cool
- 3-flat shank locks firm and stops spinning in the chuck
Cons
- No warranty term is stated
- Jobber length only, no stubby or long bits are listed
- 9 pieces only, so a broken size leaves a gap in the range
- Ships in a double blister pack, not a storage case

IRONANT 5PCS Spiral Flute Titanium HSS Step Drill
A 5-piece titanium HSS step bit set with 50 sizes, a 118° split point and spiral dual flutes in an aluminum case for sheet metal and aluminum.
Pros
- 50 sizes in 5 pieces cover many hole sizes with few bits
- 118° split point centers itself and resists walking
- Spiral dual flutes clear chips faster and let particles escape
- Aluminum case keeps the set organized
Cons
- No warranty term is stated
- Not for stainless steel or harder metal
- Made for sheet metal, so thick stock suits a twist bit better
- A damaged step bit takes many sizes out of the set at once

Cobalt Drill Bit Set - 15Pcs M35 HSS Twist Drill
A 15-piece M35 cobalt twist drill bit set from 1/16 to 3/8 in, with a 135 degree split point, straight shank and an index storage case.
Pros
- 15 pieces from 1/16 to 3/8 in, with two each of the three smallest sizes
- 135 degree split point is self-centering and prevents walk-off
- Fully ground twist design clears particles faster and cuts friction and heat
- Index storage case with the size marked for each bit
Cons
- Largest bit is 3/8 in, so larger holes need a different cutter
- No warranty term is stated
- Only one each of the sizes above 3/32 in, so no spares there
- Round straight shank, with no flat for the chuck to grip

8 Pack Titanium Coated HSS Twist Drill Bits
An 8-pack of titanium-coated HSS twist bits from 3mm to 10mm, with a hex shank and serrated side cutting.
Pros
- 8 bits cover 3mm to 10mm sizes
- Titanium coating; maker claims 2 times the life of standard bits
- Hex shank fits most electric drills
- Serrated side cutting for chip discharge
Cons
- Largest size is 10mm
- No warranty term is stated
- No storage case is stated in the listing
- Titanium coating, not a cobalt alloy, for hard metal
Other tools worth a look
Metric Cobalt Drill Bits Set 1.5-6.5mm 13PCSCheck price on Amazon
Metric M42 8% Cobalt Twist Drill Bits Set for Stainless SteelCheck price on Amazon
3/32" Titanium Drill BitsCheck price on Amazon
Compared on paper
| Bit Set | Shop Score | Pieces | Sizes | Point | Shank | Warranty |
|---|---|---|---|---|---|---|
| JEFE HEX 9-Piece Twist | 9.6/10 | 9 | 1/16 to 3/8 in | 135° split | 3-flat | Not stated |
| IRONANT 5-Piece Step | 9.6/10 | 5 | 50 sizes | 118° split | Not stated | Not stated |
| SEDIANAS M35 15-Piece | 9.6/10 | 15 | 1/16 to 3/8 in | Not stated | Straight | Not stated |
| Hariendny 8-Pack HSS | 9.6/10 | 8 | 3 to 10 mm | Not stated | Hex | Not stated |
These numbers are the tool makers’ rated figures, as their listings print them on 15 November 2026.
How the points were given
Each bit set is scored out of 10 on performance, build, value, safety and warranty, with the weights published on our How We Pick page. No listing here states a safety certification or a warranty term, so safety and warranty score zero across the picks. Performance weighs point angle, flute design and size range for aluminum.
| Product | Shop Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| JEFE HEX 9-Piece Twist | 9.6 | 30 | 21 | 21 | n/a | 0 |
| IRONANT 5-Piece Step | 9.6 | 29 | 20 | 20 | n/a | 0 |
We map each tool’s weighted total onto a 9.2 minimum and 9.8 maximum in a straight line, so the point order and score order match. Where a tool neither runs on power nor lists a safety feature, safety shows n/a and the other 90 points decide.
What the listings tell you
Four drill bit sets for aluminum are compared here. The JEFE HEX twist set covers 9 sizes and the IRONANT step set covers 50 sizes. The SEDIANAS set and the Hariendny set state fewer specs, so their sections below say less about them. No listing here states a warranty term or a safety certification.
Buying guide: the best drill bits for aluminum
Step bits or twist bits
Step bits drill many hole sizes with one bit, which suits sheet metal and thin aluminum: the IRONANT set covers 50 sizes with 5 pieces. Twist bits drill one size each and suit thicker stock: the JEFE HEX set covers 9 sizes from 1/16 to 3/8 in. Pick step bits for thin sheet and twist bits for plate and bar.
Point angle and walking
The IRONANT step bits list a 118° split point and the JEFE HEX twist bits list a 135° split point. Both split points center the bit and resist walking, which matters on smooth aluminum. A sharp split point starts the hole where you put it, without wandering across the surface.
Shank and chuck grip
The JEFE HEX set lists a 3-flat shank that locks firm and stops spinning in the chuck. The Hariendny set lists a hex shank, and the SEDIANAS set lists a straight shank. A shank with flats holds better than a smooth round shank when the bit bites.
Size range
Match the range to the holes you drill. The JEFE HEX and SEDIANAS sets run from 1/16 to 3/8 in, the IRONANT set covers 50 sizes in 5 pieces, and the Hariendny set runs from 3 to 10 mm. Count the sizes you actually need before paying for a range you will not use. See the drill bit size guide for sizes and common uses.
Aluminum and chip clearing
Aluminum clogs flutes fast, so chip clearing matters. The JEFE HEX parabolic flute clears chips fast to keep the bit cool, and the IRONANT spiral dual flutes clear chips faster and let particles escape. A flute that clears chips keeps the hole clean and the bit cooler.
Read the manual before first use, wear eye protection, keep the work area clear and ventilated, and stay within every stated rating. Read our Safety Disclaimer.
FAQ: garage tools
Are step bits good for aluminum?
Yes, for sheet metal and thin aluminum. The IRONANT step set covers 50 sizes with 5 pieces and lists a 118° split point with spiral dual flutes that clear chips faster.
What size drill bits do I need for aluminum?
Match the bit to the hole. The JEFE HEX and SEDIANAS sets run from 1/16 to 3/8 in, the IRONANT set covers 50 sizes, and the Hariendny set runs from 3 to 10 mm.
Do I need a special bit for aluminum?
Aluminum needs a sharp bit with good chip clearing. The JEFE HEX lists a 135° split point and a parabolic flute, and the IRONANT lists a 118° split point with spiral dual flutes.
Can I use these bits on stainless steel?
The IRONANT maker says its step bits are not for stainless steel or harder metal. The SEDIANAS set lists work on stainless steel and hardened metal.
What shank should I get?
The JEFE HEX lists a 3-flat shank that locks firm in the chuck, the Hariendny lists a hex shank, and the SEDIANAS lists a straight shank.
Related: the best drill bit for drilling metal, the best drill bits for stainless steel, our engine and shop equipment hub and our types of drill bit. Also see our drill bit tips. Also see our cordless drill vs hammer drill. Also see our best hammer drill. Also see our standard drill bit size.




