Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

How to Use Wet Sandpaper for Smooth Results

How to use wet sandpaper: pick a grit, keep the paper and the surface wet, and work from coarse to fine, with four wet and dry sandpaper packs compared.

How to Use Wet Sandpaper for Smooth Results
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 185 PCS Wet Dry Sandpaper Assortment 80-5000 Grit85 PCS Wet Dry Sandpaper Assortment 80-5000 Grit9.7/10View on Amazon
  2. 2Dazefree Sandpaper Assortment Grit 80 120 180 240Dazefree Sandpaper Assortment Grit 80 120 180 2409.6/10View on Amazon
  3. 315 PCS Wet Dry Sandpaper 1000-5000 Grit Sheets15 PCS Wet Dry Sandpaper 1000-5000 Grit Sheets9.6/10View on Amazon
  4. 43M(TM) Wetordry(TM) Sandpaper, 030063M(TM) Wetordry(TM) Sandpaper, 030069.6/10View on Amazon

A fender edge that looked smooth in the shop shows scratches under the sun, and the fix is a sheet of wet sandpaper and a bucket of water. Wet sandpaper cuts with water as a lubricant. Learning how to use wet sandpaper comes down to picking the right grit, keeping the surface wet and moving to finer grits step by step.

GarageToolHQ earns a commission when you buy through links on our product pages, at no extra cost to you. Read our affiliate disclosure.

Below: how to pick a grit, how to wet sand, when to change sheets, and the four packs in the gear section.

85 PCS Wet Dry Sandpaper Assortment 80-5000 Grit

85 PCS Wet Dry Sandpaper Assortment 80-5000 Grit

SCENIXE9.7/10 Shop Score
i
The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An 85-sheet assortment in 15 grits from 80 to 5000, at 9 by 3.6 in, in silicon carbide for wet and dry sanding.

Pros

  • 85 sheets in 15 grits, the widest range in this group
  • Covers 80 to 5000 grit, from coarse shaping to fine polishing
  • Silicon carbide, waterproof and tear-resistant
  • Grit numbers are printed on the back, and each sheet can be trimmed

Cons

  • The 9 by 3.6 in sheets are smaller than the 9 by 11 in Dazefree sheets
  • The sheets spread across 15 grits, so a buyer who needs many sheets of one grit gets few of each
  • 85 sheets is a large pack for a small job
  • No warranty term is stated
Dazefree Sandpaper Assortment Grit 80 120 180 240

Dazefree Sandpaper Assortment Grit 80 120 180 240

Dazefree9.6/10 Shop Score
i
The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 25-sheet assortment in 6 grits from 80 to 400, at 9 by 11 in, in silicon carbide with a latex coating for wet and dry sanding.

Pros

  • 9 by 11 in sheets, the largest sheets in this group
  • Covers 80 to 400 grit for shaping, rough work and finishing
  • Latex coating and tear-resistant kraft backing hold up when wet
  • Trims to 1/2 sheet, 1/3 sheet or 1/4 sheet sizes, with grit printed on the back

Cons

  • Stops at 400 grit, so a polishing job needs another pack
  • 25 sheets across 6 grits, so a big job runs out fast
  • Only 5 sheets of 80 grit and 4 sheets of each other grit
  • The 9 by 11 in sheets need trimming for a small sanding block
15 PCS Wet Dry Sandpaper 1000-5000 Grit Sheets

15 PCS Wet Dry Sandpaper 1000-5000 Grit Sheets

Pihemum9.6/10 Shop Score
i
The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 15-sheet assortment in 5 grits from 1000 to 5000, at 9 by 3.6 in, in silicon carbide for wet and dry sanding.

Pros

  • Covers 1000 to 5000 grit for polishing and finishing
  • Three sheets of each grit in the pack
  • Silicon carbide, waterproof and tear-resistant
  • Grit numbers are printed on the back, and each sheet can be trimmed

Cons

  • No grit below 1000, so a shaping job needs another pack
  • The 9 by 3.6 in sheets are smaller than the 9 by 11 in Dazefree sheets
  • Five grits from 1000 to 5000, so the steps between grits are wide
  • Three sheets per grit runs out fast on a large panel
3M(TM) Wetordry(TM) Sandpaper, 03006

3M(TM) Wetordry(TM) Sandpaper, 03006

3M9.6/10 Shop Score
i
The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An assorted Wetordry pack with 1000, 1500, 2000 and 2500 grit sheets at 3-2/3 by 9 in, in silicon carbide for wet and dry sanding.

Pros

  • 1000, 1500, 2000 and 2500 grit for clear coat sanding and paint defect removal
  • Silicon carbide abrasive self-fractures for a longer life
  • Works wet or dry without switching sandpaper
  • 3M Wetordry, a known name in sandpaper

Cons

  • No grit below 1000, so a shaping job needs another pack
  • Only 4 grits, the narrowest range in this group
  • One sheet each of 1000, 1500 and 2500 grit runs out fast
  • No warranty term is stated

How to use wet sandpaper: pick the grit first

Grit is the first choice, and the packs here run from 80 grit to 5000 grit. Coarse grits such as 80, 120 and 180 suit shaping and rough work, while fine grits from 1000 to 5000 suit polishing and finishing. The SCENIXE pack covers the whole range, from 80 to 5000 grit in 15 grits. Start with the coarsest grit the job needs, then move to finer grits in order.

Wet the paper and the surface

Wet sanding means sanding with water on the paper and the surface, and every pack here is made for wet and dry use. Wet sanding reduces dust and scratches, while dry sanding removes material faster. The Pihemum and SCENIXE sheets are waterproof and tear-resistant, and the Dazefree sheets have a latex coating and a tear-resistant kraft backing.

Sand in steps and change sheets

Work through the grits in order and wipe the surface clean between steps. The Pihemum and SCENIXE sheets can be trimmed to any size, so cut a sheet down to fit a sanding block or to reach a tight spot. The Dazefree sheets trim to 1/2, 1/3 or 1/4 sheet sizes. Grit numbers are printed on the back of the Pihemum, SCENIXE and Dazefree sheets, so you can tell the grits apart without guessing. Change to a fresh sheet when the paper stops cutting, and the 3M silicon carbide abrasive self-fractures for a longer life.

The gear

The grit steps above need paper in every grit from coarse shaping to fine polishing, and the four packs below cover those steps in different ranges.

FAQ: garage tools

Can I use wet sandpaper dry?

Yes. All four packs here are made for wet and dry sanding: wet to reduce dust and scratches, or dry for fast material removal.

What grit should I start with?

Start with coarse grits such as 80, 120 or 180 for shaping and rough work, and move to fine grits such as 1000, 2000 or 5000 for polishing and finishing. The SCENIXE pack covers 80 to 5000 grit in one pack.

How do I know which grit a sheet is?

Grit numbers are printed on the back of the Pihemum, SCENIXE and Dazefree sheets, so you can read the grit straight off the sheet.

Can I cut the sheets to fit a sanding block?

Yes. The Pihemum and SCENIXE sheets can be trimmed to any size, and the Dazefree sheets trim to 1/2 sheet, 1/3 sheet or 1/4 sheet sizes for hand sanding or sanding block use.

More garage guides

See How to Use a Sandpaper Block, Best Sandpaper for Car Paint and Best Sandpaper for Removing Paint.

More buying guides