Pegboard Hook Dimensions: Sizes for Garage Storage
Pegboard hook dimensions decide whether a hook seats in your board and holds the tool, and the four kits here fit 1/8 and 1/4 inch boards.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
INCLY 320PCS Pegboard Accessories Organizer Kit9.6/10View on Amazon - 2
ELEAD 297 Piece Pegboard Hooks Kit9.6/10View on Amazon - 3
280PCS Pegboard Accessories Kit9.6/10View on Amazon - 4
ELEAD 66-Piece 2/4/6 Inch Pegboard Hooks9.5/10View on Amazon
You finish a brake job, wipe your hands, and reach for the wrench you hung on the pegboard last week, only to find the hook on the floor and the wrench buried in a drawer. A hook that does not fit the board will not stay put, and a hook that is too short will not hold the tool you bought it for. Pegboard hook dimensions are the measurements that decide whether a hook seats in your board and holds the tool: the board thickness, the hole spacing and the hook length.
GarageToolHQ earns a commission when you buy through links on our product pages, at no extra cost to you. Read our affiliate disclosure.
Below: what each measurement means, how to measure your board, and the kits that fit.

INCLY 320PCS Pegboard Accessories Organizer Kit
A 320-piece pegboard kit with 16 hook types, 20 bins and 130 peg locks.
Pros
- 320 pieces with 16 hook types
- 20 bins for fasteners and small hardware
- 130 peg locks hold hooks in place
- Hardened steel hooks with chrome plating
Cons
- 130 of the 320 pieces are peg locks, not hooks
- Bins are plastic, not steel
- The 1/4 inch fit needs the peg locks
- Made for boards with 1 inch hole spacing only

ELEAD 297 Piece Pegboard Hooks Kit
A 297-piece pegboard kit with 16 hook types, 20 bins and peg locks.
Pros
- 297 pieces with 16 hook types
- 20 bins for fasteners and small hardware
- Peg locks included for secure placement
- Hardened steel hooks with chrome plating
Cons
- Bins are plastic, not steel
- Made for boards with 1 inch hole spacing only
- Fewer pieces than the 320-piece INCLY kit
- No hook lengths are stated

280PCS Pegboard Accessories Kit
A 280-piece pegboard kit with 16 hook styles, 12 bins and stainless steel double peg locks.
Pros
- 280 pieces with 16 hook styles
- Stainless steel double peg locks
- 12 bins for hardware and small parts
- Hardened steel hooks with chrome plating
Cons
- 12 bins, fewer than the 20-bin kits
- Bins are plastic, not steel
- Made for boards with 1 inch hole spacing only
- Fewer pieces than the two larger kits

ELEAD 66-Piece 2/4/6 Inch Pegboard Hooks
A 66-piece set of 2, 4 and 6 inch pegboard hooks in heavy-duty hardened steel with rubber caps.
Pros
- Hook lengths stated: 2, 4 and 6 inches
- Heavy-duty hardened steel with galvanized finish
- Rubber caps protect tools and stop slipping
- Fits 1/4 and 1/8 inch pegboards
Cons
- No bins included in the set
- No peg locks included in the set
- Only 66 pieces, the smallest kit here
- Hook lengths stop at 6 inches
Pegboard hook dimensions: what the numbers mean
Three numbers describe a pegboard hook. The board thickness has to match the kit: the kits here fit 1/8 inch and 1/4 inch pegboards. The hole spacing is the distance between holes, and the INCLY, SEDY and ELEAD 297-piece kits are made for boards with 1 inch spacing. The hook length is how far the hook reaches from the board, and the 66-piece ELEAD set states its lengths as 2, 4 and 6 inches. Check all three before you order.
The INCLY 320-piece kit uses peg locks for the 1/4 inch fit, and the SEDY 280-piece kit uses stainless steel double peg locks. The ELEAD 297-piece kit fits both thicknesses and includes peg locks for secure placement. A hook without a lock can work loose when you lift a tool off it, so a kit with locks suits a board that gets used every day.
How to measure your pegboard before ordering
Start with the board, not the hooks. Measure the board thickness to tell a 1/8 inch board from a 1/4 inch board, and measure the distance between two holes to confirm the 1 inch spacing the larger kits are made for. If your board is metal, check the kit states a fit for metal pegboards, as the INCLY and SEDY kits do; if it is wood, the ELEAD 297-piece kit states a fit for metal or wood boards.
Count the hooks you need before you pick a kit size. A kit of 320 pieces sounds large until you see that 130 of the INCLY pieces are peg locks, and a kit of 66 pieces is hooks only, with no bins and no locks. Bins add storage for fasteners and small parts, and a ring tool holder or multi-tool rack holds tools that do not hang well from a single hook.
Pegboard hook kits for garage storage
Once you know your board is 1/8 or 1/4 inch thick, these kits cover the hooks for a garage wall, and the larger sets add bins and locks.
FAQ: garage tools
What size pegboard hooks fit a 1/4 inch pegboard?
All four kits here fit 1/4 inch pegboards. The INCLY kit uses peg locks for the 1/4 inch fit, and the SEDY kit uses stainless steel double peg locks.
How far apart are pegboard holes?
The INCLY, SEDY and ELEAD 297-piece kits are made for boards with 1 inch spacing between holes. The 66-piece ELEAD set states no hole spacing, so measure your board first and confirm the spacing matches before ordering.
What length pegboard hook do I need?
The 66-piece ELEAD set is the one here that states hook lengths: 2, 4 and 6 inches. Short hooks suit small hand tools, and longer hooks suit tools that need more room from the board.
Do pegboard hooks fit metal pegboards?
The INCLY 320-piece kit and the SEDY 280-piece kit both state a fit for metal and non-metal pegboards, and the ELEAD 297-piece kit states a fit for metal or wood pegboards.
What keeps a pegboard hook from falling out?
Peg locks hold the hook in the board. The INCLY kit includes 130 peg locks, the SEDY kit uses stainless steel double peg locks, and the ELEAD 297-piece kit includes peg locks.
Related: the best metal pegboard tool storage, pegboard vs slatwall, our tool storage hub and tool storage ideas for a small garage.




