Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Pressure Washer Repair Parts: What to Buy (2026)

When a washer leaks at the gun, drips at the hose or loses pressure at the pump, the fix is usually a small part: an O-ring kit, a fitting set or a valve kit matched to the size and pressure the maker states.

Pressure Washer Repair Parts: What to Buy (2026)
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Simpson Replacement Valve Kit for Pressure WasherSimpson Replacement Valve Kit for Pressure Washer9.6/10View on Amazon
  2. 2Raincovo Pressure Washer Quick Connect 3/8 InchRaincovo Pressure Washer Quick Connect 3/8 Inch9.6/10View on Amazon
  3. 3120 Pcs Pressure Washer O Rings for 1/4"120 Pcs Pressure Washer O Rings for 1/4"9.6/10View on Amazon
  4. 4Tatuo 48 Pcs O-ring Power Pressure Washer Kit 5Tatuo 48 Pcs O-ring Power Pressure Washer Kit 59.6/10View on Amazon

A washer that sputters at the gun, weeps at a hose joint or fades halfway through a wash rarely needs replacing. In most cases the fault sits in a small wearing part, and that is where pressure washer repair parts come in. This guide explains which parts fail, how to match a replacement to the fitting and the pressure it must hold, and which kits cover the job.

GarageToolHQ earns a commission when you buy through links on our product pages, at no extra cost to you. Read our affiliate disclosure.

Below: the parts that fail first, how to match sizes and pressure ratings, and the kits for the job.

Simpson Replacement Valve Kit for Pressure Washer

Simpson Replacement Valve Kit for Pressure Washer

SIMPSON9.6/10 Shop Score
i
The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 6-piece valve kit with O-rings and seats for AAA and OEM pressure washer pumps, in stainless steel and brass.

Pros

  • 6 complete valves with O-rings and seats included
  • Fits AAA and OEM pressure washer pumps
  • Stainless steel and brass construction
  • Genuine Simpson parts for commercial and residential washers

Cons

  • Only fits the pump models the maker lists
  • No warranty term is stated
  • Valve kit only; no pump, hose or gun included
  • No max pressure rating is stated for the kit
Raincovo Pressure Washer Quick Connect 3/8 Inch

Raincovo Pressure Washer Quick Connect 3/8 Inch

Raincovo9.6/10 Shop Score
i
The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An 8-piece stainless steel quick-connect adapter set with 3/8 inch fittings and a max working pressure of 5000 PSI.

Pros

  • 8 pieces with female and male thread
  • Stainless steel, anti-rust
  • Max working pressure of 5000 PSI
  • Fits hose, wand, ball valve and other pressure washer parts

Cons

  • 3/8 inch fittings only; measure before ordering
  • No warranty term is stated
  • No stated flow rating
  • Adapters only; no O-rings or seals in the set
120 Pcs Pressure Washer O Rings for 1/4"

120 Pcs Pressure Washer O Rings for 1/4"

ZDBB9.6/10 Shop Score
i
The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 120-piece NBR O-ring kit in 3/8-inch and 1/2-inch inner diameters for 1/4-inch and 3/8-inch quick-connect fittings.

Pros

  • 120 O-rings in the kit
  • 60 rings in each of two sizes
  • NBR rubber for hot and cold water use
  • Rated from -40°F to 212°F

Cons

  • Verify the required size before ordering
  • Two sizes only; other sizes need a different kit
  • No stated max pressure
  • No storage case is stated
Tatuo 48 Pcs O-ring Power Pressure Washer Kit 5

Tatuo 48 Pcs O-ring Power Pressure Washer Kit 5

Tatuo9.6/10 Shop Score
i
The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 48-piece kit with 40 O-rings in 5 sizes and 8 stainless steel filters for pumps, guns, wands and hoses.

Pros

  • 40 O-rings in 5 sizes and 5 colors
  • 8 stainless steel filters included
  • 50 mesh filters with 6 small outer tabs
  • Fits pumps, trigger guns, wands, lances and hoses

Cons

  • No stated max pressure or temperature range
  • 3/4 inch washers only
  • Inner diameters of the 5 O-ring sizes are not stated
  • The filters act as flow restrictors

Pressure washer repair parts: what usually fails first

O-rings fail first. They seal the joints between the spray gun, the wand, the hose and the tips, and when they flatten or crack, water weeps at the joint and pressure drops. A kit of fresh rings in the right sizes restores the seal without replacing the gun or the hose.

Quick-connect fittings wear next. The snap joint loosens with use, the thread loses its bite, and the fitting starts to drip under pressure. A set of stainless steel adapters in the matching size replaces the worn joint and keeps the hose, wand and ball valve connected.

Pump valves fail last and matter most. The valves let water flow through the pump and manifold to build pressure, so a pump that has lost pressure often needs a valve kit rather than a new pump. For a pump that has lost pressure, start at the pump: the valve kit below is sold by pump model, so match the model number first.

Match the size and the pressure rating before ordering

Size decides the fit. The 120-piece O-ring kit below covers 1/4-inch and 3/8-inch quick-connect fittings, with rings at a 3/8-inch and a 1/2-inch inner diameter. The adapter set is 3/8 inch quick connect with a 3/8 inch NPT thread, and the filter kit uses 3/4 inch washers. Measure the fitting or check the pump model number before ordering, since a ring or fitting in the wrong size will not seal.

Pressure decides the rating. The adapter set is rated to a max working pressure of 5000 PSI, so match that figure to the washer’s pressure: a fitting rated below the washer’s pressure is the wrong part. The 120-piece O-ring kit is rated for water from -40°F to 212°F, so match that range to the water temperature.

Pressure washer repair parts: the gear

The kits below cover the common failure points: O-rings for weeping joints, fittings for worn quick-connects, and a valve kit for a pump that has lost pressure.

Detailing safety

Keep electric pressure washers on a GFCI outlet, never point the wand at people or pets, wear eye protection with polishers and chemicals, and read the label before mixing any cleaning products. Read our Safety Disclaimer.

Fit the new part the careful way

Check the pump model number before ordering a valve kit, and verify the required size before ordering O-rings. Grease the O-ring on each new valve before fitting it, as the maker directs, and check the joint for drips with the washer running before putting the tools away.

FAQ: garage tools

What pressure washer repair parts fail most often?

O-rings fail most often, since they seal every joint between the gun, the wand, the hose and the tips, and they flatten with use. Quick-connect fittings wear next, and pump valves fail when a pump loses pressure. The kits in this guide cover each of these.

How do I know which O-ring size my washer needs?

Measure the fitting or check the size the maker states. The 120-piece kit below covers 1/4-inch and 3/8-inch quick-connect fittings, with rings at a 3/8-inch and a 1/2-inch inner diameter, and the filter kit uses 3/4 inch washers. Verify the required size before ordering, since the wrong size will not seal.

Can a valve kit fix a pressure washer pump that has lost pressure?

It can when the valves are the fault. The Simpson kit (on Amazon) holds 6 complete valves with O-rings and seats for AAA and OEM pressure washer pumps, and the valves control the water flow through the pump and manifold that builds pressure. Check the pump model number against the maker’s list before ordering.

Do quick-connect fittings fit any pressure washer hose?

No. The adapter set below is 3/8 inch quick connect with a 3/8 inch NPT thread, made for the hose, wand and ball valve, and rated to a max working pressure of 5000 PSI. Match the size and the thread to the fitting being replaced.

Can I use these parts on a gas pressure washer?

The parts here are sold by size and pump model, not by fuel type. The valve kit fits AAA and OEM pumps by model number, and the adapter set works on hot and cold water washers. Match the pump model number and the fitting size first.

Related: gas vs battery pressure washer, our best gas pressure washer picks, the best electric pressure washer picks and how to change oil on a pressure washer.

More buying guides