Power Washer Repair Parts: What to Keep on Hand
A matching pump kit, a thermal relief valve and the right fittings keep a tired gas washer working instead of heading for the scrap pile.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
OEM Technologies 3300 PSI 2.4 GPM Vertical9.6/10View on Amazon - 2
VEVOR Pressure Washer Pump Kit 3/4" Horizontal9.6/10View on Amazon - 3
TOOLCY Pressure Washer Pump 3/4" Shaft Horizontal9.6/10View on Amazon - 4
2800–3100 PSI Horizontal Pressure Washer Pump 3/4"9.6/10View on Amazon
The driveway wash is half done when the spray goes soft and the washer starts to surge. A worn pump is the usual suspect, and power washer repair parts are what stand between that stalled wash and a working machine again. The part that matters most is a matching replacement pump kit, with the small wear parts around it, and this guide shows what to keep on hand and how to match each part to the washer in the garage.
GarageToolHQ earns a commission when you buy through links on our product pages, at no extra cost to you. Read our affiliate disclosure.
Below: how to match a pump kit to a washer, the four kits in this guide, and the checks to run before ordering.

OEM Technologies 3300 PSI 2.4 GPM Vertical
A vertical axial cam pump kit rated at 3300 PSI and 2.4 GPM, with a maintenance-free crankcase and thermal relief valve.
Pros
- 3300 PSI at 2.4 GPM for gas washers
- Maintenance-free crankcase, no oil changes
- Thermal relief valve guards against overheating
- 2 year warranty stated
Cons
- Vertical engines only, check orientation
- Lowest flow here at 2.4 GPM
- Needs matching inlet and outlet connections
- Die-cast aluminum body rather than a brass pump head

VEVOR Pressure Washer Pump Kit 3/4" Horizontal
A horizontal triplex pump kit rated at 3300 PSI and 2.5 GPM, with a forged brass pump head, an oil sight glass and a recommended pressure of 2600 PSI.
Pros
- 3300 PSI max with 2.5 GPM flow
- Forged brass one-piece pump head
- Sight glass shows oil level without a dipstick
- Triplex design for daily cleaning tasks
Cons
- Horizontal engines only
- Recommended operating pressure of 2600 PSI, below the 3300 PSI maximum
- Heaviest stated weight here at 12.0 pounds
- No warranty term is stated

TOOLCY Pressure Washer Pump 3/4" Shaft Horizontal
A horizontal pump rated at 2600 to 3300 PSI and 2.5 GPM, with three nozzle tips, a maintenance-free crankcase and 200 hours of listed operation time.
Pros
- 2600 to 3300 PSI at 2.5 GPM
- Three nozzle tips included
- 200 hours of listed operation time
- Easy setup in 5 to 10 minutes with the key
Cons
- Horizontal engines only
- Fits engines from 180 to 225cc only
- No warranty term is stated
- Die-cast aluminum housing, not a brass pump head

2800–3100 PSI Horizontal Pressure Washer Pump 3/4"
A horizontal pump rated at 2800 to 3100 PSI and 2.5 GPM, with pre-filled oil, a double seal system and an easy start valve.
Pros
- 2800 to 3100 PSI at 2.5 GPM
- Pre-filled oil and double seal system
- Easy start valve, thermal relief valve and unloader included
- 150 hrs of listed running time
Cons
- Horizontal engines only
- Lowest maximum pressure here at 3100 PSI
- Fits engines from 180 to 196cc only
- No oil-level check is stated
What power washer repair parts to keep on hand
A replacement pump kit is the main part to keep on hand. Around it, keep the wear parts the kits in this guide carry: a thermal relief valve, an unloader, seals, and the hardware and siphon tube that come with a kit. Keep the old pump close when ordering: its pressure rating, flow rating, engine orientation, shaft diameter and inlet and outlet connections are the five things the new kit has to match.
Match the pump before you order
Start with orientation. A vertical-shaft kit fits a vertical engine and a horizontal-shaft kit fits a horizontal engine, and the two do not swap. Then match the pressure and flow ratings to the old pump, and finish with the connections: match the inlet and outlet fittings to the hose and the washer, and check the shaft diameter against the engine before ordering.
| Pump kit | Orientation | Pressure | Flow |
|---|---|---|---|
| Simpson OEM Pump Kit | Vertical | 3300 PSI | 2.4 GPM |
| VEVOR Triplex Pump Kit | Horizontal | 3300 PSI | 2.5 GPM |
| TOOLCY Horizontal Pump | Horizontal | 2600 to 3300 PSI | 2.5 GPM |
| EZJOB Horizontal Pump | Horizontal | 2800 to 3100 PSI | 2.5 GPM |
The gear: pump kits for the repair
Each kit below handles the pump swap itself: match the rating and orientation to the old pump, then fit the kit with its included hardware.
Pump care after the swap
Most of these kits ask for little upkeep. The Simpson and TOOLCY kits use a maintenance-free crankcase, so there is no oil to change, and the EZJOB kit (on Amazon) comes with pre-filled oil and a double seal system. The VEVOR kit has a sight glass that shows the oil level without a dipstick.
Keep electric pressure washers on a GFCI outlet, never point the wand at people or pets, wear eye protection with polishers and chemicals, and read the label before mixing any cleaning products. Read our Safety Disclaimer.
Wear eye protection when the washer runs, and never point the spray at people. Check the fittings for leaks before the first wash.
FAQ: garage tools
How do I know which pump kit fits my pressure washer?
Match engine orientation, pressure rating, flow rating and shaft diameter to the old pump, plus the inlet and outlet connections. A kit that matches on pressure and flow but not on the shaft still does not fit.
Can I replace just the pump instead of buying a new pressure washer?
Yes. The makers say replacing the pump saves buying a whole new power washer.
Do these pump kits need oil changes?
The Simpson and TOOLCY kits use a maintenance-free crankcase, and the EZJOB kit comes with pre-filled oil. The VEVOR kit has a sight glass for checking the oil level.
What does a thermal relief valve do?
It protects the pump from overheating while the washer runs in bypass, releasing small amounts of hot water and taking in cooler water.
How long will a replacement pump last?
Running time is stated for two kits: the TOOLCY lists 200 hours and the EZJOB lists 150 hrs. The other two state no running time.
Related: pressure washer pump parts, pressure washer pump repair, axial vs triplex pump and how to change oil on a pressure washer.




