Ring Terminal Sizes: Wire Gauge and Stud Chart
Ring terminal sizes come down to two measurements: the wire gauge the barrel takes and the stud size the ring fits, with a chart for each range.
On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
TICONN 250 Pcs Heat Shrink Wire Connectors9.7/10View on Amazon - 2
haisstronica 260PCS Heat Shrink Ring Terminals9.6/10View on Amazon - 3
TKDMR 160Pcs Copper Wire Lugs AWG2 4 6 8 10 129.6/10View on Amazon - 4
Twidec/130PCS Battery Cable Lugs Kit Copper Wire9.5/10View on Amazon
A battery cable end that will not sit flat on its post, or a ground wire with a ring too small for its bolt, stops a job cold. Ring terminal sizes are set by the wire gauge the barrel takes and the stud size the ring fits. Match both and the terminal fits; match only one and it does not.
GarageToolHQ earns a commission when you buy through links on our product pages, at no extra cost to you. Read our affiliate disclosure.
TICONN 250 Pcs Heat Shrink Wire Connectors
A 250-piece heat shrink terminal kit with color-coded connectors for 22 to 10 AWG wire.
Pros
- 250 pieces: ring, fork, spade and butt terminals
- Red, blue and yellow terminals for 22 to 10 AWG wire
- 3:1 dual-wall heat shrink with adhesive, waterproof seal
- Tinned copper barrels, studs from #10 to 3/8 in
Cons
- No warranty term is stated
- Fork connectors fit #10 posts only
- No M6 or M8 ring sizes
- No voltage rating is stated
haisstronica 260PCS Heat Shrink Ring Terminals
A 260-piece heat shrink ring terminal kit in 3 colors and 4 sizes for 22 to 10 AWG wire.
Pros
- 260 pieces, the largest count here
- 3 colors, 4 sizes, 22 to 10 AWG
- Pure copper terminals with 0.7 mm ring tongues
- Heat shrink tubing, waterproof, dustproof and insulating
Cons
- No warranty term is stated
- No voltage rating is stated
- No fork, spade or butt connectors
- No stud size above 3/8 in
TKDMR 160Pcs Copper Wire Lugs AWG2 4 6 8 10 12
A 160-piece kit with 80 copper ring lugs for AWG 2 to 12 wire and 80 pieces of heat shrink tubing.
Pros
- 80 copper lugs for AWG 2 to 12, plus 80 pieces of tubing
- 100% annealed electrolytic copper with a tinned surface
- Inspection window for wire insertion
- Rated up to 600V and 257 degrees Fahrenheit
Cons
- No warranty term is stated
- No stud sizes are stated for the ring holes
- No terminals for wire smaller than 12 AWG
- No color coding for gauge identification
Twidec/130PCS Battery Cable Lugs Kit Copper Wire
A 130-piece copper lug kit for AWG 2 to 16 wire with heat shrink tubing and M6 and M8 ring sizes.
Pros
- Widest gauge range here, AWG 2 to 16
- M6 and M8 ring sizes with SC sizes from SC35-10 to SC6-6
- Pure copper, bell mouth design for easy wire entry
- Heat shrink tubing with strong flame retardancy
Cons
- Title and model say 130 pieces while the part number says 110 pieces
- No warranty term is stated
- No color coding for gauge identification
- No voltage rating is stated
Ring terminal sizes: wire gauge first, stud size second
A ring terminal size has two parts: the wire gauge in AWG, which says which wire fits the barrel, and the stud size, which says which bolt the ring fits. The kits here cover 22 to 10 AWG for small wiring and 2 to 16 AWG for heavy battery cable; stud sizes run #10, 1/4 in, 5/16 in and 3/8 in on the small kits, and M6 and M8 on the Twidec lug kit. Sizing is the bench step; the wiring work itself belongs to a licensed electrician.
| Wire gauge | Terminal color | Stud sizes | Kit |
|---|---|---|---|
| 22 to 10 AWG | Red, blue, yellow | #10, 1/4 in, 5/16 in, 3/8 in | TICONN 250-piece, haisstronica 260-piece |
| 2 to 12 AWG | Bare copper | Not stated | TKDMR 160-piece |
| 2 to 16 AWG | Bare copper | M6, M8 | Twidec 130-piece |
The color code is the fast way to check a small terminal: the TICONN and haisstronica kits use red, blue and yellow terminals color-coded to gauge. The heavy copper lugs carry no color code; read the size marking on the lug. See our automotive wire gauge chart for the full picture.
How to read the size on the listing
Listings state the size in different places: check the title, the bullets and the spec table. The TICONN fit guide is the clearest here: ring terminals accept stud sizes #10, 1/4 in, 5/16 in and 3/8 in, while fork connectors fit #10 posts. The haisstronica listing splits its range into AWG 22-16, 16-14 and 12-10, with 0.7 mm ring tongues. The TKDMR listing gives 10 types across AWG 2 to 12, and the Twidec listing gives SC sizes with M6 and M8 ring crimps. Where a listing disagrees with itself, trust the title and bullets: the Twidec title and model say 130 pieces while its part number says 110 pieces.
Read the manual before first use, wear eye protection, keep the work area clear and ventilated, and stay within every stated rating. Read our Safety Disclaimer.
Ring terminal kits for the job
The kits below cover different gauge ranges: the TICONN and haisstronica kits cover 22 to 10 AWG with color-coded terminals, the TKDMR and Twidec kits heavy battery cable from 2 AWG.
FAQ: garage tools
What size ring terminal do I need for 10 AWG wire?
A terminal rated for 10 AWG wire, in the yellow range of a color-coded kit. The TICONN and haisstronica kits both cover 22 to 10 AWG, so match the terminal color to the gauge, then the ring to the stud size.
What does #10 mean on a ring terminal?
It is the stud size the ring fits. The TICONN fit guide states ring terminals accept #10, 1/4 in, 5/16 in and 3/8 in, while fork connectors fit #10 posts.
Can one kit cover both small wire and battery cable?
Not in these four. The TICONN and haisstronica kits cover 22 to 10 AWG, while the TKDMR kit covers AWG 2 to 12 and the Twidec kit AWG 2 to 16.
Do these kits include heat shrink tubing?
Yes. The TICONN kit uses dual-wall insulation with a 3:1 shrink ratio, the TKDMR kit includes 80 pieces of 3:1 tubing, the Twidec kit includes heat shrink tubing, and the haisstronica kit uses heat shrink tubing for waterproof, dustproof and insulating protection.
Related: automotive wire gauge chart, the best ring terminal for car battery, our best ring terminal set and ring terminal vs compression lug.
