Best CV Axle Puller for Home Mechanics (2026)
Five CV axle pullers for home mechanics, compared by fork size, slide hammer, fit and warranty.
On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallDraviple 3.75 in Kit9.7/10View on Amazon - 2
Most CompleteVEVOR Puller Tool Set9.7/10View on Amazon - 3
Best Head OnlyDraviple 3.75 in Head9.5/10View on Amazon - 4
Best Ford FitReluxGo 63 mm Fork9.5/10View on Amazon
A front-wheel-drive axle that will not budge turns a Saturday brake job into a wrestling match with a pry bar. The inner joint sits behind its boot with a hidden retaining ring holding it in, and prying at it risks the roller bearing inside the joint. The best cv axle puller for home mechanics hooks the inner joint housing and pulls it straight out with a slide hammer, so the axle comes free without damage to the joint. This guide compares pullers from the listings: complete sets with a hammer in the box, and heads and forks that fit a hammer already on the shelf.
GarageToolHQ earns a commission when you buy through links on this page, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall Draviple 3.75 in Kit: A 3.75 inch kit with a slide hammer, multiple adapters and 8 screws, plus a 2 year manufacturer warranty stated. Check price on Amazon
- Most Complete VEVOR Puller Tool Set: A 4 lb slide hammer with a 19 inch extension rod, 2 inch and 2.5 inch forks, a steel cable adapter and an outer CV adapter. Check price on Amazon
- Best Head Only Draviple 3.75 in Head: A 3.75 inch head with 8 screws that fits a 5/8 inch-18 slide hammer, with a 2 year manufacturer warranty stated. Check price on Amazon
- Best Ford Fit ReluxGo 63 mm Fork: A 63 mm fork with a 3.3 inch depth and a stated fit for 1997-2017 Ford models and the 2007-2015 Lincoln Navigator. Check price on Amazon
Picks for the garage
3.75 inch CV Axle Shaft Puller Tool Kit
A 3.75 inch CV axle puller kit with a slide hammer, multiple adapters and 8 screws, built from hardened steel, with a 2 year manufacturer warranty stated.
Pros
- Slide hammer and multiple adapters included in the kit
- 8 screws grip the joint through eight bite holes
- Hardened steel build for pulling stuck axles
- 2 year manufacturer warranty stated
Cons
- No fork opening range beyond 3.75 inch is stated
- No slide hammer weight is stated
- No extension rod is listed
- No safety listing is stated
VEVOR Inner CV Axle Puller Tool Set with 5/8
A CV axle puller set with a 4 lb slide hammer, a 19 inch extension rod, 2 inch and 2.5 inch forks, a steel cable adapter and an outer CV adapter.
Pros
- Two fork sizes, 2 inch and 2.5 inch, in one set
- 19 inch extension rod reaches deeper joints
- 4 lb slide hammer measures 22.6 inches
- Steel cable adapter and outer CV adapter included
Cons
- No warranty term is stated
- No safety listing is stated
- Forks cover 2 inch and 2.5 inch joints only, per the listing
- Set weight is 15.87 pounds, so it needs solid shelf space
Draviple 3.75 inch CV Axle Shaft Puller Tool
A 3.75 inch CV axle puller head with 8 screws, made from hardened steel, that fits a 5/8 inch-18 slide hammer; the slide hammer is not included.
Pros
- 8 screws grip the joint through eight bite holes
- Fits a 5/8 inch-18 slide hammer you may already own
- Hardened steel build
- 2 year manufacturer warranty stated
Cons
- Slide hammer is not included
- Single head only, no extra adapters listed
- No fork opening range beyond 3.75 inch is stated
- No safety listing is stated
TRUCFUSION 3.75" CV Axle Puller Tool with 8 Bolts
A 3.75 inch CV axle puller set with a stainless steel slide hammer and 8 locking bolts, built from high-strength alloy steel, for CV joints with an outer diameter of less than 3.75 inches.
Pros
- Stainless steel slide hammer included
- 8 locking bolts give balanced clamping pressure
- High-strength alloy steel build
- Fits joints under 3.75 inches across trucks, ATVs and UTVs
Cons
- No warranty term is stated
- No safety listing is stated
- No slide hammer weight is stated
- No extension rod is listed
ReluxGo Inner CV Axle Puller Removal Tool 63mm
A 63 mm inner CV axle puller fork with a nut, made from heat-treated carbon steel, that fits slide hammers with 5/8 inch-18 threads; the slide hammer is not included.
Pros
- 63 mm opening with 3.3 inch depth for wide-style inner joints
- Fits 5/8 inch-18 slide hammers
- Heat-treated carbon steel, corrosion resistant and wear resistant
- Stated fit for 1997-2017 Ford models and the 2007-2015 Lincoln Navigator
Cons
- Slide hammer is not included
- No warranty term is stated
- Single fork only, no extra adapters
- No safety listing is stated
Compared on paper
| Model | Shop Score | Fork opening | Slide hammer | Fit | Warranty |
|---|---|---|---|---|---|
| Draviple 3.75 in Kit | 9.7/10 | 3.75 inch | Included | Cars, trucks, ATV and UTV | 2 year manufacturer |
| VEVOR Puller Tool Set | 9.7/10 | 2 inch and 2.5 inch | Included, 4 lb, 22.6 inch | Inner CV joints | Not stated |
| Draviple 3.75 in Head | 9.5/10 | 3.75 inch | Not included | Cars, trucks, ATV and UTV | 2 year manufacturer |
| TRUCFUSION Axle Puller | 9.5/10 | 3.75 inch | Included | Under 3.75 inch joints | Not stated |
| ReluxGo 63 mm Fork | 9.5/10 | 63 mm, 2.5 inch | Not included | 1997-2017 Ford | Not stated |
Specifications are manufacturer rated, as published on each listing and collected 2 November 2026.
How the points were given
Each puller earns points for performance, build, value, safety and warranty, with the weights published in How we pick. A stated safety listing earns safety points, and none of the listings here states one, so no pick earns safety points. A stated warranty term earns warranty points, and the Draviple listings state a 2 year manufacturer warranty.
| Product | Shop Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Draviple 3.75 in Kit | 9.7 | 29 | 21 | 20 | n/a | 3 |
| VEVOR Puller Tool Set | 9.7 | 32 | 21 | 22 | n/a | 0 |
| Draviple 3.75 in Head | 9.5 | 24 | 20 | 18 | n/a | 3 |
| TRUCFUSION Axle Puller | 9.5 | 29 | 21 | 20 | n/a | 0 |
| ReluxGo 63 mm Fork | 9.5 | 26 | 20 | 19 | n/a | 0 |
Scores run from 9.2 to 9.8: each product’s point total is placed on that range, so more points always means a higher score. Safety counts only for powered gear or where the listing states safety features; where it does not apply, the score is taken over the remaining 90 points.
What the listings tell you
We read 5 CV axle puller listings. Some include a slide hammer in the box, and the rest are a head or a fork that needs a hammer you already own. The Draviple listings state a 2 year manufacturer warranty, and no listing here states a safety listing. Fork openings run from 63 mm to 3.75 inch. The ReluxGo fork, the Draviple head and the VEVOR set all use a 5/8 inch-18 fit, while the Draviple kit and the TRUCFUSION set include a slide hammer in the box.
Buying guide: best cv axle puller for home mechanics
Fork size
Match the opening to the joint. The ReluxGo fork opens at 63 mm, which the listing also gives as 2.5 inch, with a 3.3 inch depth for wide-style inner joints. The VEVOR set includes 2 inch and 2.5 inch forks. The Draviple pullers and the TRUCFUSION puller measure 3.75 inch, and the TRUCFUSION listing fits joints with an outer diameter of less than 3.75 inches.
Slide hammer in the box or not
The VEVOR set, the Draviple kit and the TRUCFUSION set include a slide hammer, so the puller is ready to use. The ReluxGo fork and the Draviple head do not include one, and both fit slide hammers with 5/8 inch-18 threads. Check the shelf before ordering a head-only puller.
Bolt and screw grip
The Draviple pullers grip with 8 screws through eight bite holes, and the TRUCFUSION puller locks on with 8 bolts. The TRUCFUSION listing says all 8 bolts or fewer can be used, to suit the joint. A grip that spreads the load across the joint housing beats a pry bar against one edge.
Warranty
The Draviple kit and the Draviple head state a 2 year manufacturer warranty. The other listings state no warranty term. A stated term is what earns warranty points here, and the spec table is where to confirm it.
Fit for your axle
The ReluxGo listing names 1997-2017 Ford models, the 2010-2014 Ford SVT Raptor and the 2007-2015 Lincoln Navigator. The Draviple listings fit cars, trucks, ATV and UTV models. The TRUCFUSION listing fits CV joints with an outer diameter of less than 3.75 inches, across trucks, ATVs and UTVs. Match the listing to the vehicle before the job starts.
A large socket set covers the axle nut side of the job.
Use rated jack stands on solid ground, wear eye protection with power and air tools, keep fuel-burning equipment out of a closed garage, and follow the manual for every tool. Read our Safety Disclaimer.
Garage Fit Check
- Measure the joint first: openings here run from 63 mm to 3.75 inch, and the TRUCFUSION puller fits joints under 3.75 inches.
- Check the thread: the ReluxGo fork, the Draviple head and the VEVOR set all use a 5/8 inch-18 fit.
- Plan swing room: the VEVOR hammer measures 22.6 inches, with a 19 inch extension rod for deeper joints.
- Plan storage: the VEVOR set measures 23.62 x 8.07 x 3.94 inches and weighs 15.87 pounds, while the TRUCFUSION set measures 21.5 x 7.1 x 3.3 inches.
- Keep the screws and bolts with the head: the Draviple pullers use 8 screws and the TRUCFUSION puller uses 8 bolts.
FAQ: garage tools
Do I need a slide hammer to use a CV axle puller?
Yes, unless the set includes one. The VEVOR set, the Draviple kit and the TRUCFUSION set include a slide hammer. The ReluxGo fork and the Draviple head do not, and both fit slide hammers with 5/8 inch-18 threads.
What size fork fits an inner CV joint?
It depends on the joint. The ReluxGo fork opens at 63 mm, the VEVOR set includes 2 inch and 2.5 inch forks, and the Draviple and TRUCFUSION pullers measure 3.75 inch. Measure the joint before choosing.
Can one person remove a stuck CV axle with these pullers?
The Draviple head listing says a single person can remove a stuck axle with it, and the Draviple kit listing makes the same claim for its set. Leave room for the slide hammer to swing, and check the fit first.
What thread do these puller heads fit?
The ReluxGo fork and the Draviple head fit slide hammers with 5/8 inch-18 threads. The VEVOR set uses the same 5/8 inch-18 fit for its adapters.
Which pullers here state a warranty?
The Draviple kit and the Draviple head state a 2 year manufacturer warranty. The other listings state no warranty term.
Related: the best bearing puller kit with slide hammer, the best slide hammer dent puller and our engine and shop equipment hub. Also see our glue puller vs slide hammer dent puller.
