Best Bearing Puller Kit with Slide Hammer (2026): 5 Kits Compared
Five slide hammer bearing puller kits for rear axle and blind-hole work, compared by adapter range, steel, attachments and warranty.
On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallCARVALAX 23-Piece Set9.7/10View on Amazon - 2
Best Rear Axle SetOMT 8-Piece Axle Set9.7/10View on Amazon - 3
Best Blind-Hole SetKOOPOOL 16-Piece Set9.7/10View on Amazon - 4
Best Flange-Type ValueAlltooetools 7-Piece Set9.6/10View on Amazon - 5
Strongest HammerXtremepowerUS 5 lb Set9.6/10View on Amazon - 6
KOOPOOL 16Pc Blind Hole Bearing Puller KitView on Amazon - 7
Manelord 46PCS Dent Puller- Car Dent Repair kit with SlideView on Amazon
A rear axle bearing that refuses to move can turn a weekend brake job into a long afternoon in the garage. When a press-fit part sits tight in its bore, a slide hammer puller gives a straight, controlled pull instead of prying at the edges. This guide compares the best bearing puller kit with slide hammer options by adapter range, steel, included attachments and warranty, so the kit matches the job waiting on the bench.
GarageToolHQ earns a commission when you buy through links on this page, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall CARVALAX 23-Piece Set: 23-piece set with 12-way attachments, carbon steel and chrome vanadium parts, and a case. Check price on Amazon
- Best Rear Axle Set OMT 8-Piece Axle Set: 8-piece set with adapters from 1-1/4 in to 2-7/8 in and AISI 1045 steel. Check price on Amazon
- Best Blind-Hole Set KOOPOOL 16-Piece Set: 16-piece set with 10 split collets for 1/4 in to 2-1/3 in inner diameters. Check price on Amazon
- Best Flange-Type Value Alltooetools 7-Piece Set: 7-piece set with 3 adapters from 1 in to 2-7/8 in and 45# steel. Check price on Amazon
- Strongest Hammer XtremepowerUS 5 lb Set: 5 lb slide hammer with CR-V steel jaw attachments for hubs and bearings. Check price on Amazon
Picks for the garage
CARVALAX 12-Way Slide Hammer Puller Set
A 23-piece, 12-way slide hammer set with axle, jaw, dent and seal attachments in a case, built from carbon steel and chrome vanadium steel.
Pros
- 23 pieces cover hubs, bearings, gears, axles and dents
- Axle puller spans 4-1/2 in to 5-1/2 in
- 3-jaw and 2-jaw pullers work inside and outside
- Case keeps the set sorted for transport
Cons
- No slide hammer weight stated in the listing data
- No product dimensions stated in the listing data
- No separate bearing adapter range stated
- 23 pieces take more storage room than a small axle-only set
OMT Rear Axle Bearing Puller Tool Kit and Slide
An 8-piece rear axle bearing puller set with a 5/8 in slide hammer, 4-point yoke and 3 adapters covering 1-1/4 in to 2-7/8 in inner diameters.
Pros
- Adapters cover 1-1/4 in to 2-7/8 in inner diameters
- AISI 1045 steel with chrome-plated hammer
- Yoke and locknut form a flange-type puller
- Hook included for seals and press-fit parts
Cons
- No case stated in the listing data
- Axle focus only, no jaw or collet attachments
- 2.5 lb hammer is lighter than the 5 lb hammer here
- 10.0 pounds is the heaviest stated weight here
KOOPOOL 16Pc Blind Hole Bearing Puller Kit
A 16-piece blind-hole bearing puller kit with a slide hammer, counterstay puller and 10 split collets for 1/4 in to 2-1/3 in inner diameters.
Pros
- 10 split collets cover 1/4 in to 2-1/3 in (6 to 59 mm)
- Counterstay puller adds a controlled second method
- Forged AISI 1045 steel with chromoly collets
- Blow-molded case keeps parts sorted
Cons
- No slide hammer weight stated in the listing data
- Blind-hole focus, no flange yoke for axle work
- No product dimensions stated in the listing data
- Collet method needs the inner race accessible
Alltooetools Rear Axle Bearing Remove Puller Tool
A 7-piece rear axle bearing puller set with a 5/8 in slide hammer, 4-point yoke, hook, locknut and 3 adapters for 1 in to 2-7/8 in inner diameters.
Pros
- Adapters cover 1 in to 2-7/8 in inner diameters
- 45# steel with chrome, galvanized and black finishes
- Yoke and locknut form a flange-type puller
- Hook included for seals and stuck bearings
Cons
- No case stated in the listing data
- No slide hammer weight stated in the listing data
- Axle focus only, no jaw or collet attachments
- No separate seal puller range stated
XtremepowerUS Rear Wheel Bearing Puller Kit
A slide hammer axle puller set with a 5 lb hammer, CR-V steel internal and external jaw attachments, and a 90 days warranty term.
Pros
- 5 lb hammer delivers strong pulling force per the listing
- Internal and external jaw attachments included
- CR-V steel for strength and wear resistance
- Covers hubs, bearings, bushings, gears and seals
Cons
- 90 days warranty term is shorter than the 1 year terms here
- No adapter range stated in the listing data
- No case stated in the listing data
- No piece count stated in the listing data
Other tools worth a look
KOOPOOL 16Pc Blind Hole Bearing Puller KitCheck price on Amazon
Manelord 46PCS Dent Puller- Car Dent Repair kit with SlideCheck price on Amazon
Compared on paper
| Kit | Shop Score | Adapter range | Slide hammer | Steel | Warranty |
|---|---|---|---|---|---|
| CARVALAX 23-Piece Set | 9.7/10 | 4-1/2 in to 5-1/2 in | Not stated | Carbon steel, chrome vanadium | 1-year |
| OMT 8-Piece Axle Set | 9.7/10 | 1-1/4 in to 2-7/8 in | 5/8 in, 2.5 lb | AISI 1045 | 1 year warranty |
| KOOPOOL 16-Piece Set | 9.7/10 | 1/4 in to 2-1/3 in | Not stated | Forged AISI 1045, chromoly | 1 year warranty |
| Alltooetools 7-Piece Set | 9.6/10 | 1 in to 2-7/8 in | 5/8 in | 45# steel | 1 Year |
| XtremepowerUS 5 lb Set | 9.6/10 | Not stated | 5 lb | CR-V steel | 90 days |
Specifications are manufacturer rated, as published on each listing and collected 4 November 2026.
How the points were given
Each kit is scored on performance, build, value, safety and warranty, with the weights published on our How We Pick page. No listing here states a safety certification, so no safety points are awarded here; the ranking reflects the stated steel, adapter coverage, attachment count and warranty term.
| Product | Shop Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| CARVALAX 23-Piece Set | 9.7 | 32 | 21 | 21 | n/a | 3 |
| OMT 8-Piece Axle Set | 9.7 | 30 | 21 | 21 | n/a | 3 |
| KOOPOOL 16-Piece Set | 9.7 | 30 | 22 | 20 | n/a | 3 |
| Alltooetools 7-Piece Set | 9.6 | 29 | 20 | 20 | n/a | 3 |
| XtremepowerUS 5 lb Set | 9.6 | 29 | 21 | 20 | n/a | 2 |
Scores run from 9.2 to 9.8: each product’s point total is placed on that range, so more points always means a higher score. Safety counts only for powered gear or where the listing states safety features; where it does not apply, the score is taken over the remaining 90 points.
What the listings tell you
Every kit here states a warranty term: 1 year on the OMT, KOOPOOL and Alltooetools kits, 1-year on the CARVALAX kit and 90 days on the XtremepowerUS kit. Adapter ranges are stated for the axle kits and the blind-hole kit, while the CARVALAX axle puller range and the XtremepowerUS jaw set leave some coverage unstated. Cases are stated for the CARVALAX kit and the KOOPOOL blow-molded case, and no case is stated for the other three kits.
Buying guide: best bearing puller kit with slide hammer
Adapter range
Match the bearing inner diameter to a stated range before anything else. The OMT adapters cover 1-1/4 in to 2-7/8 in, the Alltooetools adapters cover 1 in to 2-7/8 in, and the KOOPOOL collets cover 1/4 in to 2-1/3 in (6 to 59 mm) for blind holes. The CARVALAX axle puller spans 4-1/2 in to 5-1/2 in, while the XtremepowerUS listing states jaw attachments with no adapter range.
Slide hammer weight
Slide hammer weight is stated for two kits: the OMT hammer is 2.5 lb and the XtremepowerUS hammer is 5 lb. The other listings state a 5/8 in slide hammer shaft or no weight at all, so compare those kits on adapters and attachments instead of hammer weight.
Steel and finish
Steel is stated for every kit here. OMT and KOOPOOL list AISI 1045 medium carbon steel, CARVALAX lists carbon steel and chrome vanadium steel, XtremepowerUS lists CR-V steel, and Alltooetools lists 45# carbon and alloy steel. Finishes are stated too: chrome plating on the OMT hammer, galvanized yokes, blackened or black finished adapters, and a galvanized finish on the KOOPOOL kit.
Storage and case
A case matters when a kit has many small parts. The CARVALAX set ships in a case and the KOOPOOL parts sit in a custom blow-molded case. The OMT, Alltooetools and XtremepowerUS listings state no case, so plan bench or drawer space for the yoke, adapters and hook.
Warranty terms
Warranty terms are stated in every spec table here. Three kits state 1 year, the CARVALAX kit states 1-year, and the XtremepowerUS kit states 90 days. A longer stated term is worth weighing when two kits cover the same adapter range.
Use rated jack stands on solid ground, wear eye protection with power and air tools, keep fuel-burning equipment out of a closed garage, and follow the manual for every tool. Read our Safety Disclaimer.
Garage Fit Check
- Measure the bearing inner diameter first, then match it to a stated range: 1-1/4 in to 2-7/8 in, 1 in to 2-7/8 in, or 1/4 in to 2-1/3 in for blind holes.
- Flange-type axle work needs the 4-point yoke and locknut included with the OMT and Alltooetools kits.
- Blind-hole work needs collets: the KOOPOOL kit lists 10 split collets plus a counterstay puller.
- Storage: the CARVALAX kit includes a case and the KOOPOOL kit a blow-molded case; the other listings state no case.
- Check the stated warranty term before the first job: 1 year on the OMT, KOOPOOL and Alltooetools kits, 1-year on CARVALAX, 90 days on XtremepowerUS.
FAQ: garage tools
What is a bearing puller?
A bearing puller is a tool that grips a bearing or its adapter and draws the press-fit part out of its bore with steady force. Slide hammer kits use a sliding weight on a shaft, while collet kits expand inside the inner race and jaw kits grip from inside or outside.
How do you use a slide hammer bearing puller?
Lock the adapter or yoke onto the part, then slide the hammer along the shaft so its inertia pulls the part free. The OMT and Alltooetools listings describe locking the slide hammer onto a 4-point yoke for flange-type parts, and the KOOPOOL listing describes slide hammer inertia for most parts with a counterstay option for controlled removal.
What size bearing puller do I need?
Match the bearing inner diameter to a stated adapter or collet range: 1-1/4 in to 2-7/8 in, 1 in to 2-7/8 in, or 1/4 in to 2-1/3 in for blind holes. When the diameter falls outside every stated range here, a different kit is the right call.
How do you use a bearing puller tool?
Pick the attachment that fits the job: jaws for internal and external gripping, collets for blind holes, or a yoke for flange-type parts with threaded holes. Attach it firmly, apply force along the shaft axis, and check the fit before each pull so the attachment stays seated.
How much is a wheel bearing puller?
The listings compared here state no prices, so compare them on adapter range, steel, attachments and warranty instead. Adapter coverage and the stated warranty term say more about fit for the job than any single figure.
Related: our engine and shop equipment hub, the best bearing puller, the best bearing puller for wheel hubs, the best small bearing puller kit and the bearing puller vs gear puller comparison. Also see our best bearing puller for beginners. Also see our best slide hammer dent puller.
