Best Harmonic Balancer Puller Installer Kit (2026)
5 harmonic balancer puller and installer kits compared by puller and installer function, bolt sizes, jaw and plate design, kit contents and warranty terms.
On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallDPTOOL Puller and Installer Kit9.6/10View on Amazon - 2
Best Installer OnlyOrion Motor Tech Installer Set9.5/10View on Amazon - 3
Best 59-Piece KitYuesstloo 59-Piece Puller Kit9.5/10View on Amazon - 4
Best 3-Jaw PullerGEAROLL 3-Jaw Puller Kit9.5/10View on Amazon
A harmonic balancer that will not move turns a Saturday timing job into a long afternoon in the garage. The old damper sits pressed on the crank snout, and prying at it risks the crank, the damper and the weekend. The best harmonic balancer puller installer kit gives the job a straight pull and a straight seat: a puller that draws the damper off the crank without damage, and an installer that threads the damper home evenly. This roundup compares the kits by puller and installer function, bolt sizes, jaw and plate design, kit contents and warranty terms.
GarageToolHQ earns a commission when you buy through links on this page, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall DPTOOL Puller and Installer Kit: Pulls and installs with metric and standard bolts from M16 x 2.0 to M8 x 1.25, a thrust bearing design and a 12 months warranty. Check price on Amazon
- Best Installer Only Orion Motor Tech Installer Set: The only kit here with an M12 x 1.75 adapter, with 4 long reach adapters and a nut and bearing assembly in solid blackened steel. Check price on Amazon
- Best 59-Piece Kit Yuesstloo 59-Piece Puller Kit: 59 pieces with bolts from M16 x 2.0 down to M6 x 1.0, a bearing puller plate, gloves and a carrying case. Check price on Amazon
- Best 3-Jaw Puller GEAROLL 3-Jaw Puller Kit: 6 jaws in two sets, 4 forcing rods and a balancer holder for pressed-on balancers with a single center retainer bolt. Check price on Amazon
Picks for the garage
Harmonic Balancer Puller Removal & Install Tool
A puller and installer kit with metric and standard bolts, a thrust bearing design and heavy duty steel with an anti-oxidation coating.
Pros
- Pulls and installs harmonic balancers, flywheels and steering wheels
- Metric and standard bolts from M16 x 2.0 to M8 x 1.25
- Thrust bearing design for smooth, even removal and installation
- 12 months warranty with refund or replacement for quality problems
Cons
- No M12 x 1.75 bolt included
- Not for LT1 Gen 2 engines or 4.0L Chrysler models
- No carrying case stated
- Piece count not stated on the listing
Orion Motor Tech OMT Harmonic Balancer Installer
A 5-piece long reach installer set with 4 adapters and a nut and bearing assembly, in solid blackened steel.
Pros
- Only kit here with an M12 x 1.75 adapter
- Long reach adapters for Ford, GM and Dodge/Chrysler models
- Nut and bearing assembly threads the damper on evenly
- Solid steel, blackened for strength and corrosion resistance
Cons
- Installs only: no puller function
- Only 5 pieces
- Fitment depends on measuring the balancer port first
- No carrying case stated
weyleity Harmonic Balancer Puller Removal
A puller and installer kit with over 30 bolts, a puller plate bearing and a carrying case, in heavy-duty steel with an anti-oxidation coating.
Pros
- Pulls and installs harmonic balancers, flywheels and steering wheels
- Over 30 bolts in metric and standard sizes
- Thrust bearing design for smooth, damage-free operation
- Carrying case for storage and transport
Cons
- No M12 x 1.75 bolt included
- Not for LT1 Gen 2 engines or 4.0L Chrysler models
- Only a 6 month warranty
- No forcing screw length stated
Yuesstloo 59 Pcs Harmonic Balancer Puller Removal
A 59-piece puller and installation kit with a bearing puller plate, thrust bearing design and a carrying case with gloves.
Pros
- 59 pieces with the widest bolt range here
- Pulls and installs, with a bearing puller plate and thrust bearing
- Carrying case and a pair of gloves included
- Heavy duty steel, rust-resistant and corrosion-resistant
Cons
- No warranty term stated
- No M12 x 1.75 bolt included
- Not for LT1 Gen 2 engines or 4.0L Chrysler models
- A 59-piece kit takes more storage space
GEAROLL Harmonic Balancer Puller Installer Kit
A 3-jaw puller and installer set with 6 jaws in two sets, 4 forcing rods, a balancer holder and a storage case.
Pros
- Only jaw puller here: 6 jaws in two sets for old and new models
- 4 forcing rods at 100 mm, 135 mm, 165 mm and 185 mm
- Balancer holder and gloves in a storage case
- Removes pressed-on balancers without disassembling the radiator
Cons
- No warranty term stated
- No plate bolt sizes stated
- Jaw puller only, no plate and bearing design
- Vehicle fit is listed by engine, so check the listing before ordering
Compared on paper
| Kit | Shop Score | Type | Pieces | Bolt sizes | Warranty |
|---|---|---|---|---|---|
| DPTOOL Puller and Installer Kit | 9.6/10 | Puller and installer | Not stated | M16 x 2.0 to M8 x 1.25 | 12 months |
| Orion Motor Tech Installer Set | 9.5/10 | Installer only | 5 | M16 x 2.0, M12 x 1.75, M14 x 1.5, M12 x 1.5 | 1 Year |
| weyleity Puller and Installer Kit | 9.5/10 | Puller and installer | Over 30 bolts | Metric and standard | 6 months |
| Yuesstloo 59-Piece Puller Kit | 9.5/10 | Puller and installer | 59 | M16 x 2.0 to M6 x 1.0 | Not stated |
| GEAROLL 3-Jaw Puller Kit | 9.5/10 | Puller and installer | Not stated | Not stated | Not stated |
Specifications are manufacturer rated, as published on each listing and collected 5 November 2026. Where a listing contradicts itself, both figures are shown in the review, and the title and bullets are trusted over the spec table. Where a listing states nothing, the table reads Not stated.
How the points were given
Each kit is scored on performance, build, value, safety and warranty. None states a safety listing, so all score zero on safety. How We Pick explains the weights. DPTOOL, Orion Motor Tech and weyleity state a warranty term; Yuesstloo and GEAROLL state none.
| Product | Shop Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| DPTOOL Puller and Installer Kit | 9.6 | 32 | 21 | 21 | 0 | 3 |
| Orion Motor Tech Installer Set | 9.5 | 30 | 21 | 19 | 0 | 3 |
| weyleity Puller and Installer Kit | 9.5 | 30 | 21 | 20 | 0 | 2 |
| Yuesstloo 59-Piece Puller Kit | 9.5 | 33 | 22 | 21 | 0 | 0 |
| GEAROLL 3-Jaw Puller Kit | 9.5 | 30 | 21 | 20 | 0 | 0 |
Scores run from 9.2 to 9.8: each product’s point total is placed on that range, so more points always means a higher score.
What the listings tell you
Every one of the 5 listings states metric and standard bolt sizes, and every one is built from steel with a coating or finish against rust. DPTOOL, Yuesstloo and weyleity state they lack the M12 x 1.75 bolt, while Orion Motor Tech includes it. GEAROLL is the only jaw kit here; DPTOOL, Yuesstloo and weyleity use a thrust bearing plate design, and Orion Motor Tech uses a nut and bearing assembly. Yuesstloo, GEAROLL and weyleity include a case for storage.
Buying guide: the best harmonic balancer puller installer kit
Puller, installer, or both
Orion Motor Tech installs only: the kit threads a damper onto the crank with a nut and bearing assembly and 4 adapters, and it does not pull one off. DPTOOL, Yuesstloo, GEAROLL and weyleity remove and install, so one kit covers the whole job. If the damper is already off and only needs seating, the Orion Motor Tech set is enough; if the damper is still pressed on the crank, pick a kit that pulls.
Bolt sizes and the missing M12 x 1.75
Most kits here cover M16 x 2.0, M14 x 1.5 and M12 x 1.5, with M8 x 1.25 bolts for the puller plate. Orion Motor Tech is the only kit here with an M12 x 1.75 adapter. DPTOOL, Yuesstloo and weyleity state plainly that they lack the M12 x 1.75 bolt, and each states it does not fit LT1 Gen 2 engines or 4.0L Chrysler models. Measure the balancer port before ordering, as the Orion Motor Tech listing advises, and match the bolt sizes to the crank and the damper.
Jaws or a plate
GEAROLL pulls with jaws: 6 jaws in two sets, 3 thicker for older models and 3 thinner for the newest, with 4 forcing rods and a holder. The other kits pull with a plate and a thrust bearing, which draws the damper off evenly. A jaw puller suits a pressed-on damper with a single center retainer bolt; a plate kit suits a damper with bolt holes around the hub. Check which style the damper accepts before buying.
Kit size and storage
Yuesstloo packs 59 pieces, with bolts from M16 x 2.0 down to M6 x 1.0 and a pair of gloves. Orion Motor Tech packs 5 pieces: 4 adapters and a nut and bearing assembly. weyleity packs over 30 bolts in a carrying case. Bigger is not always better: match the bolt sizes to the job, then look at the case, since a kit that lives in a case stays together between jobs.
Use rated jack stands on solid ground, wear eye protection with power and air tools, keep fuel-burning equipment out of a closed garage, and follow the manual for every tool. Read our Safety Disclaimer.
Garage Fit Check
- Check the bolt sizes on the listing against the crank and damper: only Orion Motor Tech includes the M12 x 1.75 adapter.
- Check the forcing screw drive: GEAROLL lists a 3/8 in drive forcing screw at 90 mm, with forcing rods at 100 mm, 135 mm, 165 mm and 185 mm.
- Check storage: Yuesstloo, GEAROLL and weyleity include a case; DPTOOL and Orion Motor Tech state no case.
- Check the fitment notes: DPTOOL, Yuesstloo and weyleity state they do not fit LT1 Gen 2 engines or 4.0L Chrysler models.
FAQ: garage tools
Do you need a puller and an installer, or just one?
A puller draws a pressed-on damper off the crank, and an installer seats the new one. DPTOOL, Yuesstloo, GEAROLL and weyleity do both jobs, while Orion Motor Tech installs only. Buy the pair of functions when the damper is still on the crank.
What bolt sizes do these kits cover?
Most cover M16 x 2.0, M14 x 1.5 and M12 x 1.5, with M8 x 1.25 bolts for the puller plate. Orion Motor Tech is the only kit here with an M12 x 1.75 adapter, and DPTOOL, Yuesstloo and weyleity state they lack it.
Will these kits fit your vehicle?
Match the bolt sizes to the crank and damper, and read the fitment notes on the listing. DPTOOL, Yuesstloo and weyleity state they do not fit LT1 Gen 2 engines or 4.0L Chrysler models, and Orion Motor Tech advises measuring the balancer port before ordering.
What warranty do these kits carry?
DPTOOL states 12 months, Orion Motor Tech states 1 Year, and weyleity states 6 months. Yuesstloo and GEAROLL state no warranty term.
Related: the best bearing puller tool kit for car, the best pulley puller, the best serpentine belt tool for home mechanics and the engine and shop equipment hub.
