Best Automotive Relay Removal Tool (2026)

A horn that stays silent or a fan that will not run often points to a relay seated deep in the fuse box, and fingers alone rarely grip it well enough to pull it straight out. Prying with a screwdriver risks a cracked relay housing or a bent terminal. This guide compares the best automotive relay removal tool by piece count, relay puller design, storage and warranty, using only what each listing publishes.

GarageToolHQ earns a commission when you buy through links on this page, at no extra cost to you. Read our affiliate disclosure.

Picks for the garage

#	Product	Shop Score	Buy
1	DISEN Automotive Electrical Disconnect Pliers Set	9.5/10	Buy on Amazon
2	VKQTS 7PCS Automotive Electrical Terminal	9.4/10	Buy on Amazon
3	GRENTOOL 10-Piece Electrical Disconnect Pliers Kit	9.4/10	Buy on Amazon
4	VANTRONIK Fuse Puller Relay Puller Tool	9.4/10	Buy on Amazon
5	8-Piece Fuel Line Disconnect Tool Set with Hose	9.4/10	Buy on Amazon

1

DISEN Automotive Electrical Disconnect Pliers Set

DISEN·9.5/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 13-piece automotive electrical disconnect set with a relay puller plier, vertical and 60° disconnect pliers, hose and clip tools and 2 storage bags.

Check price on Amazon

Pros

• 13 pieces covering connectors, fuel lines, hoses and clips
• Relay puller plier included for fuse box relays
• Vertical and 60° disconnect pliers for tight-access areas
• High-carbon steel with non-slip plastic-coated handles

Cons

• No warranty term is stated
• 6.0 pounds, the heaviest set here
• No safety listing is stated
• No terminal pin tool is listed

2

VKQTS 7PCS Automotive Electrical Terminal

VKQTS·9.4/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 7-piece electrical terminal connector separator set with straight and 60° disconnect pliers, a dual-head tool, hose tools, a clip tool and a relay puller.

Check price on Amazon

Pros

• Straight and 60° disconnect pliers for tight spaces
• Dual-head electrical disconnect tool for confined spaces
• Relay puller pliers included
• Warranty within 3 months stated

Cons

• No storage bag or case is listed
• No safety listing is stated
• Only 7 pieces, fewer than the 13-piece and 10-piece kits
• No gloves are listed

3

GRENTOOL 10-Piece Electrical Disconnect Pliers Kit

GRENTOOL·9.4/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 10-piece electrical disconnect kit with 60° and right-angle pliers, a relay puller, hose and clip tools, gloves, a terminal pin tool and a storage bag.

Check price on Amazon

Pros

• 60° and right-angle heads for crowded engine bays
• Relay puller for stuck fuse box relays
• Gloves and terminal pin tool included
• High-carbon steel with non-slip PVC grips

Cons

• Warranty description of "3" carries no unit, so no term is scored
• No safety listing is stated
• No dimensions or weight are stated
• No fuel filter caliper is listed

4

VANTRONIK Fuse Puller Relay Puller Tool

VANTRONIK·9.4/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A single 6.5 inch fuse and relay puller with 2mm thin flat tips, a 3 inch long nose, serrated teeth and insulated handles, for flat, square, Jcase and box-shaped fuses and relays.

Check price on Amazon

Pros

• 2mm thin flat tips for narrow fuse box spaces
• 3 inch long nose for long reach
• Serrated teeth and rounded grooves grip fuses and relays
• One year warranty stated

Cons

• Single tool only, no kit pieces
• No storage bag or case is listed
• Spec table and size field disagree: 2.2 x 0.85 inches vs 2.1 x 0.6 inches
• No safety listing is stated

5

8-Piece Fuel Line Disconnect Tool Set with Hose

ZJPHANER·9.4/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An 8-piece fuel line and connector set with a relay puller, hose clamp pliers, panel and trim clip removers, push pin tools, a fuel filter caliper and a zippered case.

Check price on Amazon

Pros

• Relay puller plus fuel line disconnect tools in one set
• Panel clip, trim clip and push pin removers included
• Zippered carrying case with elastic tool holders
• Red-grip handles for a secure grip

Cons

• Warranty listed only as "limited", with no term
• No safety listing is stated
• No dimensions or weight are stated
• No terminal pin tool is listed

Compared on paper

Specs such as CFM, PSI and torque are the manufacturer’s ratings as listed, collected 30 October 2026. Where a listing contradicts itself, both figures are shown.

How the points were given

Each tool is scored on performance, build, value, safety and warranty, with the weights published on the How We Pick page. None states a UL, ETL or CSA listing, so all score zero on safety, and 2 state a clear warranty term.

Shop Scores range from a low of 9.2 to a high of 9.8, with each tool positioned by its weighted points proportionally, and more points always yields a higher score.

What the listings tell you

Five relay removal listings were compared. All 5 name a relay puller, 3 name storage, and 2 state a clear warranty term. None states a UL, ETL or CSA listing, and one spec table lists a warranty description of “3” with no unit attached.

Buying guide: best automotive relay removal tool

Kit or single puller

A full kit covers more than the relay: the DISEN kit holds 13 pieces for connectors, fuel lines, hoses and clips alongside its relay puller plier, while the GRENTOOL kit holds 10 pieces with gloves and a terminal pin tool. A single puller suits a fuse box job and nothing else: the VANTRONIK puller is a single tool for flat, square, Jcase and box-shaped fuses and relays. Choose the kit when the same afternoon also holds connector and hose work; choose the single puller when the relay is the whole job.

Reach into tight spaces

Relay boxes sit behind dashboards and deep in engine bays, so head angle matters. The DISEN and VKQTS kits include straight and 60° disconnect pliers, and the GRENTOOL kit adds right-angle heads for crowded bays. The VANTRONIK puller reaches narrow spaces with 2mm thin flat tips and a 3 inch long nose. Match the head to the space around the relay before ordering, since a straight tool cannot always reach a relay buried behind a harness.

Grip and jaw design

Jaws decide whether a relay comes out clean or cracked. The VANTRONIK puller uses serrated teeth, rounded grooves and a thin flat-nose duckbill shape for flat and box-shaped parts. The GRENTOOL pliers use precision-machined jaws for locking push-tab connectors, and the VKQTS pliers use a serrated edge to raise clamping force. Handles matter on the same job: DISEN uses non-slip plastic-coated handles, GRENTOOL uses non-slip PVC grips, VANTRONIK uses a non-slip PP+TPR handle, and ZJPHANER uses red-grip handles.

Storage and warranty

Small pullers vanish in a drawer, so storage counts. The DISEN kit packs into 2 storage bags, the GRENTOOL kit into a tool storage bag, and the ZJPHANER kit into a zippered carrying case with elastic tool holders. Warranty terms are thinner here: only the VANTRONIK puller states one year and the VKQTS kit states warranty within 3 months. The GRENTOOL spec table lists a warranty description of “3” with no unit, and the ZJPHANER spec table lists only “limited”, so neither counts as a stated term.

Garage Fit Check

• Space: the DISEN set lists 10.8 x 8.0 x 0.1 inches and 6.0 pounds, the largest kit here; the single VANTRONIK puller is 6.5 inches long.
• Storage: DISEN packs into 2 bags, GRENTOOL into one bag, ZJPHANER into a zippered case; the VANTRONIK and VKQTS listings name no storage.
• Power: these are hand pliers, so no outlet or battery is involved.
• Before the first job: check the relay shape against the puller, since the VANTRONIK listing names flat, square, Jcase and box-shaped fuses and relays.
• Check the warranty wording before ordering: only VANTRONIK and VKQTS state a term, and the GRENTOOL “3” carries no unit.

FAQ: garage tools

What does a relay puller do?

It grips a relay in a fuse box and pulls it straight out, so fingers and screwdrivers stay out of the box. The VANTRONIK listing describes serrated teeth and rounded grooves that grip flat, square, Jcase and box-shaped fuses and relays without damage.

Can one puller fit different relay shapes?

The VANTRONIK listing names flat, square, Jcase and box-shaped fuses and relays for its duckbill puller. Kit pullers like the DISEN and GRENTOOL relay pullers are described for fuse box relays generally, with no shapes listed.

Do I need a full kit or a single puller?

A single puller covers relay and fuse swaps. A kit covers the same job plus connectors, hoses and clips: the DISEN kit holds 13 pieces and the GRENTOOL kit holds 10, while the VANTRONIK puller is a single tool.

Which listings state a warranty term?

Two: the VANTRONIK puller states one year, and the VKQTS kit states warranty within 3 months. The DISEN listing states no warranty, the GRENTOOL spec table lists “3” with no unit, and the ZJPHANER spec table lists only “limited”.

Do these tools work on cars, trucks and SUVs?

The GRENTOOL listing states its set works on virtually all cars, trucks and SUVs, and the VANTRONIK listing names car, boat, truck and SUV use. Check the relay shape and the space around the fuse box before ordering.

Related: the best automotive relays, the best fuse puller, the best automotive relay box kit and our diagnostics and electrical hub.