Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Band Saw for Woodworking (2026): 5 Picks by Resaw, Blade and Table

Five band saws for woodworking, compared by resaw capacity, blade range, table tilt, motor and warranty.

Best Band Saw for Woodworking (2026): 5 Picks by Resaw, Blade and Table
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1JET JWBS-14SFXBest OverallJET JWBS-14SFX9.6/10View on Amazon
  2. 2WEN BA3962Most VersatileWEN BA39629.5/10View on Amazon
  3. 3ShopMax SS0245Strongest BenchtopShopMax SS02459.5/10View on Amazon
  4. 4Woodskil BS0901Compact PickWoodskil BS09019.4/10View on Amazon

A thick slab on the bench, a curve to cut for a chair leg, and a stack of boards that need slicing into thinner panels: that is the work a band saw earns its floor space for. The best band saw for woodworking handles resawing and curved cuts in the same machine, with a blade and table matched to the stock. This guide compares the picks by resaw capacity, blade range, table tilt, motor and warranty.

GarageToolHQ earns a commission when you buy through links on this page, at no extra cost to you. Read our affiliate disclosure.

Quick picks

  • Best Overall JET JWBS-14SFX: 13 inch resaw, 1.75 HP motor, cast-iron table and 5-year warranty. Check price on Amazon
  • Most Versatile WEN BA3962: Two speeds, 6 inch depth, 9-3/4 inch width, and a 3/8 inch blade in the box. Check price on Amazon
  • Strongest Benchtop ShopMax SS0245: 4.2 amp motor cutting 4.5 inches deep and 10 inches wide. Check price on Amazon
  • Compact Pick Woodskil BS0901: 40.0 pounds with a rip fence, 120 degree miter gauge and dust port. Check price on Amazon

Picks for the garage

JET 14" Woodworking Band Saw, 1.75 HP

JET 14" Woodworking Band Saw, 1.75 HP

Jet9.6/10 Shop Score
i
The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 14 inch floor-standing band saw with a 1.75 HP motor, 13 inch resaw capacity and a 360 sq. in. cast-iron table, with a steel stand and resaw fence included.

Pros

  • 13 inch resaw capacity, the deepest cut here
  • 1.75 HP motor with a 116 inch blade loop
  • Ground cast-iron table tilts 0 to 45 degrees
  • Steel stand and resaw fence included, 5-year warranty

Cons

  • Blade sold separately
  • 272.0 pounds, the heaviest saw here
  • Needs a 20A circuit and 115/230V power
  • 75.5 by 27.0 by 37.0 inches, the largest footprint here
WEN Band Saw with Stand, 10-Inch, 3.5-Amp

WEN Band Saw with Stand, 10-Inch, 3.5-Amp

WEN9.5/10 Shop Score
i
The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 10 inch band saw with stand, a 3.5 amp two-speed motor, 6 inch cut depth and 9-3/4 inch cut width, with a fence, miter gauge and 3/8 inch blade included.

Pros

  • Two speeds, 1520 and 2620 FPM
  • Cuts 6 inches deep and 9-3/4 inches wide
  • 3/8 inch blade included at 6 TPI, plus fence and miter gauge
  • Work light and 3-in-1 dust port included

Cons

  • Cast aluminum table, not cast iron
  • Blade range tops out at 1/2 inch wide
  • 2-year warranty, shorter than the 5-year and 3 year terms here
  • 10 inch size with 6 inch depth, less resaw than the JET
SKIL 2.8 Amp 9 In. 2-Speed Benchtop Band Saw

SKIL 2.8 Amp 9 In. 2-Speed Benchtop Band Saw

Skil9.5/10 Shop Score
i
The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 9 inch benchtop band saw with a 2.8 amp induction motor, two speeds, a rack and pinion table adjustment and a 3 year limited warranty.

Pros

  • 2.8 amp induction motor with two-speed drive
  • Tool-free belt tensioning and quick blade tension setting
  • Rack and pinion table adjustment
  • Blade-tracking sight window and ball bearing guides

Cons

  • 9 inch size suits smaller stock than the 10 and 14 inch saws here
  • 2.8 amp motor, the lowest amp rating among the saws rated in amps
  • No fence in the box
  • Dust port fits 2-1/2 inch vacuum hoses
SHOPMAX SHOPMAX 4.2 Amp 10-inch Benchtop Band Saw

SHOPMAX SHOPMAX 4.2 Amp 10-inch Benchtop Band Saw

ShopMax9.5/10 Shop Score
i
The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 10 inch benchtop band saw with a 4.2 amp induction motor, 4.5 inch cut depth and 10 inch cut width, with a fence and a 67.4 inch blade.

Pros

  • 4.2 amp motor, the strongest amp rating here
  • Cuts 4.5 inches deep and 10 inches wide
  • 67.4 inch blade, 0.14 to 0.47 inch wide
  • Heavy duty steel construction with ball bearings for smooth cuts

Cons

  • No warranty term is stated
  • Comes partially assembled
  • Dust extractor sold separately
  • 10 inch size with 4.5 inch depth, less resaw than the JET and WEN
WOODSKIL 9-Inch Band Saw, 3-Amp Benchtop Bandsaw

WOODSKIL 9-Inch Band Saw, 3-Amp Benchtop Bandsaw

Woodskil9.4/10 Shop Score
i
The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 9 inch benchtop band saw with a 3 amp motor rated at 1/2 HP, 2500 FPM blade speed, 3-1/2 inch cut depth and a rip fence included.

Pros

  • 1/2 HP motor with 2500 FPM blade speed
  • Rip fence and 120 degree miter gauge included
  • 2-1/2 inch dust port with a dust brush
  • 40.0 pounds, the lowest stated weight here

Cons

  • 3-1/2 inch cut depth, the shallowest here
  • Blade range tops out at 3/8 inch, the narrowest here
  • 1/2 HP motor, less than the 1.75 HP JET
  • No warranty term is stated

Other tools worth a look

Compared on paper

Model Shop Score Cut depth Cut width Blade range Table tilt Motor Warranty
JET JWBS-14SFX 9.6/10 13 in resaw 13-1/2 in throat 1/8 to 3/4 in, 116 in 0 to 45 degrees 1.75 HP 5-year
WEN BA3962 9.5/10 6 in 9-3/4 in 1/8 to 1/2 in, 72 in Up to 45 degrees 3.5 amp 2-year
SKIL BW9501-00 9.5/10 Not stated Not stated Not stated Rack and pinion adjustment 2.8 amp 3 year limited
ShopMax SS0245 9.5/10 4.5 in 10 in 0.14 to 0.47 in, 67.4 in Up to 45 degrees 4.2 amp Not stated
Woodskil BS0901 9.4/10 3-1/2 in 9 in 1/8 to 3/8 in, 59-1/2 in 0 to 45 degrees 3 amp, 1/2 HP Not stated

*Resaw capacity is the tallest stock the maker states the saw cuts in one pass. Every rating comes from the brand’s listing and is not a shop test (gathered 15 November 2026).

How the points were given

Each saw is scored out of 10 on performance, build, value, safety and warranty, with the weights published on our How We Pick page. No listing here states an electrical listing or safety certification, so every safety score is zero. A stated warranty term earns warranty points; the two saws with no stated warranty score zero there.

Product Shop Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
JET JWBS-14SFX 9.6 32 22 20 0 4
WEN BA3962 9.5 29 20 21 0 3
SKIL BW9501-00 9.5 27 20 20 0 3
ShopMax SS0245 9.5 29 20 21 0 0
Woodskil BS0901 9.4 28 20 20 0 0

No score drops under 9.2 or climbs past 9.8; a tool’s place inside those bounds is set by its weighted point total.

What the listings tell you

Five band saw listings were compared. All five state a motor size, and four state a table that tilts to 45 degrees. Three state a warranty term: a 5-year term, a 2-year term and a 3 year limited term. Four state a blade width range, and one states a blade sold separately.

Buying guide: the best band saw for woodworking

Resaw capacity

Resaw capacity is the tallest stock the saw slices in one pass. The JET states 13 inches, the WEN states 6 inches, and the ShopMax states 4.5 inches. The Woodskil states a 3-1/2 inch cutting depth, and the SKIL states no cut depth. Match the tallest stock in the shop to the stated figure.

Blade width

Narrow blades turn tight curves and wide blades resaw faster. The JET runs blades from 1/8 inch to 3/4 inch wide, the WEN from 1/8 inch to 1/2 inch, the Woodskil from 1/8 inch to 3/8 inch, and the ShopMax from 0.14 inch to 0.47 inch. The SKIL states no blade width. A 3/8 inch blade comes with the WEN, and the JET blade is sold separately.

Table and fence

The table carries the stock, and the fence keeps a straight cut straight. The JET table is ground cast iron at 360 sq. in. and tilts 0 to 45 degrees, with a machined-aluminum resaw fence. The WEN table is cast aluminum at 14-1/8 by 12-1/2 inches and bevels to 45 degrees, with a fence and a miter gauge. The Woodskil table is cast aluminum at 12-5/16 by 11-7/8 inches, tilts 0 to 45 degrees, and comes with a rip fence and a 120 degree miter gauge. The ShopMax uses a fence instead of a miter gauge, and the SKIL adjusts its table with rack and pinion.

Benchtop or floor standing

The JET is a floor model on a steel stand at 272.0 pounds, and it measures 75.5 by 27.0 by 37.0 inches. The WEN comes with a stand and measures 20.0 by 25.0 by 58.0 inches. The Woodskil weighs 40.0 pounds and the ShopMax weighs 54.7 pounds. The Woodskil sits on a steel base, the ShopMax is built with heavy duty steel construction, and the SKIL has a steel base too. Check the floor space and the circuit before ordering: the JET calls for a 20A circuit and runs on 115/230V, 1-phase power.

Dust port

Band saws throw dust, and a port keeps the table clear. The WEN has a 3-in-1 dust port, the Woodskil has a 2-1/2 inch dust exhaust port with a dust brush, and the SKIL dust port accepts 2-1/2 inch vacuum hoses. The ShopMax connects to a Shopmax dust extractor, sold separately. The JET states no dust port.

For more saws, see the best cordless band saw and the saws and grinders hub.

Garage safety

Read the manual before first use, wear eye protection, keep the work area clear and ventilated, and stay within every stated rating. Read our Safety Disclaimer.

Garage Fit Check

  • Floor space. The JET measures 75.5 by 27.0 by 37.0 inches on its steel stand; the WEN measures 20.0 by 25.0 by 58.0 inches with its stand.
  • Power. The JET calls for a 20A circuit and runs on 115/230V, 1-phase power.
  • Weight. The JET weighs 272.0 pounds, the ShopMax weighs 54.7 pounds, and the Woodskil weighs 40.0 pounds.
  • Dust. The WEN, Woodskil and SKIL state a dust port; the ShopMax connects to a dust extractor sold separately.
  • Blade. The WEN includes a 3/8 inch blade; the JET blade is sold separately, so order one with the saw.

FAQ: garage tools

What size band saw do I need for resawing thick stock?

Match the stated resaw capacity to the tallest stock in the shop. The JET states 13 inches, the WEN states 6 inches, and the ShopMax states 4.5 inches of cut depth. The Woodskil states a 3-1/2 inch cutting depth.

What blade width should I use for curved cuts?

Narrow blades turn tighter curves. The JET runs blades from 1/8 inch wide, the WEN from 1/8 inch, the Woodskil from 1/8 inch, and the ShopMax from 0.14 inch. Wide blades suit resawing: the JET runs up to 3/4 inch wide.

Does a band saw come with a blade?

It depends on the saw. The WEN includes a 3/8 inch blade at 6 TPI, and the JET blade is sold separately. Check the box contents before ordering.

How far does a band saw table tilt?

The JET and Woodskil tables tilt 0 to 45 degrees, the WEN table bevels up to 45 degrees, and the ShopMax adjusts up to 45 degrees. The SKIL adjusts its table with rack and pinion and states no angle.

Can a benchtop band saw cut thick stock?

It depends on the stated cut depth. The WEN cuts up to 6 inches deep and 9-3/4 inches wide, and the ShopMax cuts up to 4.5 inches deep and 10 inches wide. The Woodskil cuts 3-1/2 inches deep and 9 inches wide.

Related: the best cordless band saw, the best C clamp set, the best tool bag for power tools and our saws and grinders hub.

More buying guides