Best Bench Vise Under $100 (2026)

A brake job stalls when the part you need to hold keeps moving across the bench, and a vise that stays put turns that fight into steady work. This guide compares the vises in this search for the best bench vise under 100, by jaw width, opening, throat depth, clamping force and warranty. The picks run from a small general purpose vise to a wide jaw model for bigger metalwork, so the choice comes down to the work on the bench.

GarageToolHQ earns a commission when you buy through links on this page, at no extra cost to you. Read our affiliate disclosure.

Picks for the garage

#	Product	Shop Score	Buy
1	Wilton General Purpose Bench Vise, 4" Jaw Width	9.6/10	Buy on Amazon
2	PONY 5-Inch Heavy-Duty Bench Vise with Swivel Base	9.6/10	Buy on Amazon
3	MYTEC 2-In-1 Bench Vise Heavy Duty for Workbench	9.6/10	Buy on Amazon
4	Nakkaa 8 Inch Heavy Duty Cast Iron Bench Vise 360°	9.6/10	Buy on Amazon
5	Bench Vise Heavy Duty 6-Inch	9.5/10	Buy on Amazon

1

Wilton General Purpose Bench Vise, 4" Jaw Width

Wilton·9.6/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 4-inch general purpose vise in 30,000 PSI gray cast iron with a lifetime warranty and replaceable jaw inserts.

Check price on Amazon

Pros

• Lifetime warranty against manufacturing defects
• 30,000 PSI gray cast iron construction
• Hardened steel replaceable jaw inserts, machine serrated for grip
• Swivel base rotates 120 degrees with double lockdowns

Cons

• Jaw width of 4 inches suits light-duty work rather than large pieces
• Max jaw opening of 3 inches limits larger workpieces
• No clamping force figure is stated

2

PONY 5-Inch Heavy-Duty Bench Vise with Swivel Base

PONY·9.6/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 5-inch gray iron vise with 3968 lbs of clamping force, pipe jaws and a 360 degree swivel base.

Check price on Amazon

Pros

• 3968 lbs of clamping force, the highest figure stated here
• Multi-jaw function clamps flat material, pipe and tube
• One-pair jaw pads included to avoid scratches on clamped items
• 4 fixed mounting tabs hold the vise to the table

Cons

• No warranty term is stated
• Item weight of 25.6 pounds needs a sturdy bench
• No replaceable jaw inserts are stated
• Anvil area of 2-3/4 inches by 2-3/4 inches is modest for striking work

3

MYTEC 2-In-1 Bench Vise Heavy Duty for Workbench

MYTEC·9.6/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 6-inch cast steel vise that bolts down or clamps on, with pipe and flat jaws and a 270 degree swivel base.

Check price on Amazon

Pros

• Two mounting options: permanently bolted down or clamped onto the workbench
• 3300 lbs recommended working maximum clamping force
• Serrated pipe jaws and flat jaws in hardened steel
• Polished flat anvil for straightening nails and small metal pieces

Cons

• No warranty term is stated
• Base clamping range of 2.1 inches limits bench thickness for clamp-on use
• No mounting hardware is listed
• Throat depth of 2.2 inches is shallow for deep workpieces

4

Nakkaa 8 Inch Heavy Duty Cast Iron Bench Vise 360°

Nakkaa·9.6/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An 8-inch ductile iron vise with a 360 degree swivel base, replaceable microgroove jaws and a built-in anvil.

Check price on Amazon

Pros

• Widest jaw here at 8 inches, with a 5.9-inch maximum opening in the bullets
• Replaceable microgroove tooth steel jaws grip without slipping
• Ductile iron with a chrome-plated spindle and nuts
• 3 mounting holes anchor the vise firmly to a workbench

Cons

• No warranty term is stated
• No clamping force figure is stated
• Item weight is given only as 12.59 kg, with no pound figure

5

Bench Vise Heavy Duty 6-Inch

sanheshun·9.5/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 6-inch cast iron and steel vise with a 360 degree double locking swivel base and an oversized striking anvil.

Check price on Amazon

Pros

• 360 degree double locking swivel base for work at various angles
• Forged jaws with heat treatment for strong clamping force
• Oversized striking anvil, knock resistant and durable
• Easy installation and dismantling on a workshop bench

Cons

• No jaw opening, throat depth or clamping force figure is stated
• No warranty term is stated
• No item weight in pounds is stated; only 7.51 kg is given
• Suits wood, plastic and light metal work rather than heavy steel jobs

Compared on paper

Every rating comes from the brand’s listing and is not a shop test (gathered 28 October 2026). “Not stated” means the listing does not give the figure.

How the points were given

Each vise is scored on performance, build, value, safety and warranty, with the weights published on our How We Pick page. None of the five listings states a safety certification, so every vise scores zero on safety. Only one listing states a warranty term, the Wilton lifetime warranty, so the other four score zero on warranty.

No score drops under 9.2 or climbs past 9.8; a tool’s place inside those bounds is set by its weighted point total. Safety is scored for corded, cordless and air tools and for listings that state safety features; hand tools without either are scored on 90 points.

What the listings tell you

Jaw widths run from 4 inches to 8 inches, and stated max openings run from 3 inches to 5.9 inches. Stated clamping force appears on two listings, at 3300 lbs and 3968 lbs, while the other three state no clamping force figure. Only the Wilton listing states a warranty term. Swivel bases appear on all five listings, from 120 degrees on the Wilton to 360 degrees on three of the picks.

Buying guide: best bench vise under 100

Jaw width and opening decide the work

Jaw width sets the largest piece the vise can hold squarely. The Nakkaa jaw measures 8 inches with a 5.9-inch maximum opening in the bullets, while the Wilton jaw measures 4 inches with a 3-inch maximum opening. The MYTEC and sanheshun jaws measure 6 inches each, and the PONY jaw measures 5 inches with a 4-inch opening. For a tighter space, see our best bench vise for small garage guide.

Clamping force and jaws

Only two listings state a clamping force figure: the PONY at 3968 lbs and the MYTEC at a recommended working maximum of 3300 lbs. The MYTEC and PONY listings both state pipe jaws alongside flat jaws, so round stock has a place as well as flat stock. The Wilton listing states hardened steel replaceable jaw inserts, and the Nakkaa listing states replaceable microgroove tooth steel jaws, so worn jaws can be swapped rather than replacing the vise.

Mounting and swivel

Mounting decides whether the vise stays put under load. The MYTEC listing offers two options, permanently bolting down or clamping onto the workbench, with a base clamping range of 2.1 inches. The PONY listing states 4 fixed mounting tabs, the Nakkaa listing states 3 mounting holes, and the Wilton listing states double lockdowns on its swivel base. The sanheshun listing states easy installation and dismantling, with an improved base design to reduce lateral movement. For the fixed versus rotating choice, see swivel vs fixed bench vise.

Anvils and warranty

Every pick here carries an anvil, but the sizes differ. The MYTEC listing states a polished flat anvil, the Wilton listing states a large anvil work surface, the sanheshun listing states an oversized striking anvil, the PONY listing states an anvil area of 2-3/4 inches by 2-3/4 inches, and the Nakkaa listing states a built-in anvil. On warranty, only the Wilton listing states a term, a lifetime warranty against manufacturing defects, so warranty should not be assumed on the other four. For material differences, see cast iron vs steel bench vise.

Garage Fit Check

• Measure bench thickness against the MYTEC base clamping range of 2.1 inches if clamp-on mounting is planned.
• Check jaw width against the workpieces: 8 inches on the Nakkaa down to 4 inches on the Wilton.
• Confirm the mounting pattern before drilling: 4 tabs on the PONY, 3 holes on the Nakkaa, and double lockdowns on the Wilton.
• Plan bench load around stated weights: 25.6 pounds on the PONY and a net weight of 17 pounds on the MYTEC.
• Leave swing room for the 360 degree bases on the PONY, Nakkaa and sanheshun picks.

FAQ: garage tools

Which vise has the widest jaw?

The Nakkaa, with an 8-inch jaw width stated in the bullets. The next widest are the MYTEC and sanheshun at 6 inches each.

Which vise states the highest clamping force?

The PONY, at 3968 lbs. The MYTEC states a recommended working maximum clamping force of 3300 lbs, and the other three listings state no clamping force figure.

Which vise can clamp onto a bench without bolts?

The MYTEC, which offers a clamp base alongside the bolt-down option, with a base clamping range of 2.1 inches.

Which vise states a lifetime warranty?

The Wilton, backed by a lifetime warranty against manufacturing defects. The other four listings state no warranty term.

Do any of these vises hold pipe?

Yes. The MYTEC listing states serrated pipe jaws alongside flat jaws, and the PONY listing states a multi-jaw function for flat material, pipe and tube.

Related: the best mini bench vise, the best large bench vise, the best heavy duty bench vise under 200 and the best bench vise for home mechanics.