Best Blind Rivets 1/8 X 1/2 (2026)

Two panels that need joining, one hole drilled through them, and no way to reach the back side: that is the job a blind rivet is made for. The rivet slides in from the front, the tool pulls the mandrel, and the back end swells into a bulb that holds the joint. This guide compares the best blind rivets 1/8 x 1/2, dome head and large flange, aluminum and stainless steel, for sheet metal, trim and small repairs around the garage.

GarageToolHQ earns a commission when you buy through links on this page, at no extra cost to you. Read our affiliate disclosure.

Picks for the garage

#	Product	Shop Score	Buy
1	Large Flange 1/8 x 1/2" Inch Blind Rivets 3.2 *	9.7/10	Buy on Amazon
2	Mywish (300Pcs) 1/8" x 1/2" Black Blind Pop Rivets	9.6/10	Buy on Amazon
3	Aluminum Blind Rivets 1/8 x 1/2" - Pack of 100	9.6/10	Buy on Amazon
4	FDXGYH 100 Pcs 1/8x 1/2 Inch Rivet Grip Stainless	9.5/10	Buy on Amazon
5	Wensilon(300pcs) 1/8 * 1/2" Large Cap Open End	9.4/10	Buy on Amazon

1

Large Flange 1/8 x 1/2" Inch Blind Rivets 3.2 *

YaaYii·9.7/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Large flange aluminum blind rivets, 1/8 by 1/2 inch, with a steel mandrel and a stated grip range of 1/4 to 3/8 inch, in a pack of 250 in a storage case.

Check price on Amazon

Pros

• Grip range stated: 1/4 to 3/8 inch
• Large flange head spreads pressure on soft or thin materials
• 250 rivets in a clear plastic storage case
• Aluminum body with steel mandrel, rust-resistant

Cons

• No warranty term stated
• Silver color only in this pack
• Grip range tops out at 3/8 inch, so thicker stacks need another rivet
• No flange diameter stated, only the 1/8 inch shank

2

Mywish (300Pcs) 1/8" x 1/2" Black Blind Pop Rivets

MYWISH·9.6/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Black aluminum blind rivets, 1/8 by 1/2 inch, with a steel mandrel and an open-end design, in a pack of 300 in a reusable labeled container.

Check price on Amazon

Pros

• 300 rivets, the largest pack here
• Aluminum body with steel mandrel, resistant to corrosion and acids
• Reusable transparent container labeled with size and quantity
• Self-plugging open-end design, works with standard rivet guns

Cons

• No warranty term stated
• No grip range stated
• No flange or dome head style stated
• After-sale service is promised, but no warranty term backs it

3

Aluminum Blind Rivets 1/8 x 1/2" - Pack of 100

YaaYii·9.6/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Black aluminum dome head blind rivets, 1/8 by 1/2 inch, corrosion-resistant, in a pack of 100 for metal, wood and plastic.

Check price on Amazon

Pros

• Dome head gives a clean, professional finish
• Corrosion-resistant aluminum for indoor and outdoor use
• Works with manual, pneumatic and automated riveting tools
• Suits automotive repairs, HVAC, gutter work and DIY

Cons

• No warranty term stated
• No grip range stated
• Pack of 100, smaller than the 250 and 300 packs here
• No mandrel material stated

4

FDXGYH 100 Pcs 1/8x 1/2 Inch Rivet Grip Stainless

FDXGYH·9.5/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Stainless steel blind rivets, 1/8 by 1/2 inch, with high hardness and rust resistance, in a pack of 100 for indoor and outdoor use.

Check price on Amazon

Pros

• Stainless steel body, high hardness and rust resistance
• Works with automatic riveting machines, rivet guns and rivet buckers
• Suits indoor and outdoor use
• Mandrel forms an upset on the blind end and expands the shank

Cons

• Spec table lists size as 3.0 by 12 mm against the title's 1/8 by 1/2 inch
• Spec table lists color as black against a stainless steel body
• No warranty term stated
• No grip range stated

5

Wensilon(300pcs) 1/8 * 1/2" Large Cap Open End

Wensilon·9.4/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Large cap open end black aluminum blind rivets, 1/8 by 1/2 inch, in a pack of 300 with no further detail in the listing.

Check price on Amazon

Pros

• 300 rivets in the pack
• Large cap head, per the title
• Aluminum body, per the title
• Open end design, per the title

Cons

• No bullets at all, so no grip range, material detail or use is stated
• No warranty term stated
• No grip range stated
• No storage case or container stated

Compared on paper

*Grip range is the maker stated range where the listing gives one. Specs such as CFM, PSI and torque are the manufacturer’s ratings as listed, collected 12 November 2026.

How the points were given

Each rivet is scored out of 10 on performance, build, value, safety and warranty, with the weights explained in How We Pick. A stated grip range and a clear material earn performance points, head style and mandrel earn build points, and pack size earns value points. No listing here states a safety certification or a warranty term, so safety and warranty earn no points across the picks.

Shop Scores range from a low of 9.2 to a high of 9.8, with each tool positioned by its weighted points proportionally, and more points always yields a higher score. Only powered tools, or tools with stated safety features, get safety points. Everything else is rated out of 90.

What the listings tell you

We read the listings for the rivets in this guide. All are 1/8 by 1/2 inch, and all state an aluminum or stainless steel body. One listing gives a grip range, one gives no bullets at all, and one disagrees with its own spec table on size and color. We note each in the reviews below and trust the title and bullets over the spec table.

Buying guide: best blind rivets 1/8 x 1/2

Head style

A dome head sits low and looks clean on a finished surface. A large flange head spreads the load over soft or thin material, and the listing for the large flange pick says it suits soft or thin sheet. Pick the head for the material, not the look alone.

Grip range

Grip range is the thickness of material the rivet can join. Only one listing here states a grip range, 1/4 to 3/8 inch, so check the thickness of your stack before you order. A rivet with too little grip will not set tight, and one with too much grip will not swell right.

Material and mandrel

Aluminum rivets with a steel mandrel are the common pick here, and one pick is stainless steel throughout. Aluminum suits indoor and outdoor use where rust is a concern, and stainless steel suits harsher spots. Check the mandrel too: the listings here pair an aluminum body with a steel mandrel on the picks that state it.

Pack size and storage

Packs here run from 100 to 300 rivets, and two picks come in a storage case or a reusable container. Match the pack to the job: a small repair needs a small pack, and a long run of panels needs the bigger box. A labeled container keeps the size clear when the bag is gone.

Setting the rivet

All of these rivets work with a standard rivet gun, and the listings also name manual, pneumatic and automated tools. Drill the hole to the rivet size, slide the rivet in, and pull the mandrel until it snaps. Wear eye protection: a mandrel end can fly when it breaks.

Garage Fit Check

• Measure the stack before you order: only one pick here states a grip range, 1/4 to 3/8 inch.
• Check the head style against the material: large flange for soft or thin sheet, dome head for a clean finish.
• Count the rivets in the box: packs here hold 100, 250 or 300 rivets.
• Keep the rivet gun on the bench: these rivets work with a standard rivet gun, manual or pneumatic.

FAQ: garage tools

What size hole does a 1/8 inch blind rivet need?

A 1/8 inch drill hole, per the listing for the large flange pick, which says it fits most 1/8 inch drill holes and rivet tools.

What is the grip range of a blind rivet?

Grip range is the thickness of material the rivet can join. Only one pick here states it, at 1/4 to 3/8 inch, so check the listing for the rivet you buy.

Can blind rivets join plastic and wood?

Yes, per the listings: the dome head pick lists metal, wood and plastic, and the large flange pick lists sheet metal, plastic and wood. A large flange head suits soft or thin material best.

Do blind rivets work with a standard rivet gun?

Yes. The listings state these rivets work with standard rivet guns, and with manual, pneumatic and automated riveting tools.

Related: the best blind rivets for riveter, the best blind rivets for soft materials, the best blind rivet removal tool, the blind rivet vs closed end rivet, the blind rivet vs rivet nut, the best rivet gun for beginners and our air tools picks.