Best Dash Cam Suction Cup Mount (2026): 5 Mounts Compared

A dash cam only records what it can see, and a mount that droops or falls off the windshield leaves the drive unrecorded. The mount has to hold the camera steady through potholes and summer heat, point it at the road without blocking the view, and come off clean when the car changes hands. A best dash cam suction cup mount does all of that with a suction cup, a ball joint and the right adapter for the camera. This guide compares suction cup mounts by joints, rotation, suction cup size, hold weight and warranty.

GarageToolHQ earns a commission when you buy through links on this page, at no extra cost to you. Read our affiliate disclosure.

Picks for the garage

#	Product	Shop Score	Buy
1	Sportway S10 Dash Cam Suction Cup Mount Holder	9.6/10	Buy on Amazon
2	LIUFACAI Dash Cam Mount, Suction Cup Mount	9.5/10	Buy on Amazon
3	Glucrean Suction Cup Mount for Yi Dash Cam 2.7'	9.5/10	Buy on Amazon
4	OctinPris Dash Camera Suction Cup Mount Dashcam	9.5/10	Buy on Amazon
5	Sportway S504 Pro Dash Cam Mount (5th Gen)	9.4/10	Buy on Amazon

1

Sportway S10 Dash Cam Suction Cup Mount Holder

Sportway·9.6/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A dash cam suction cup mount with 6 joints, 270 degree rotation, a 5.5 cm cup and an 11 lb bearing weight, with a 3-year warranty.

Check price on Amazon

Pros

• 6 joints or more suit Rove, APEMAN, Roav, Nexar, YI and Z-Edge cameras
• 11 lb bearing weight, the heaviest hold stated here
• Mount tolerates minus 40 to 120 degrees Celsius; cup minus 20 to 70 degrees Celsius
• 3-year warranty for quality-related issues

Cons

• 270 degree rotation, less than the 360 degree mounts here
• Suits 90% of car dash cameras per the listing, not every model
• POM and ABS plastics, no metal parts stated
• One mount per pack

2

LIUFACAI Dash Cam Mount, Suction Cup Mount

LIUFACAI·9.5/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A windshield suction cup mount with an anti-drop cable and a 2 year warranty, made for R2-4K and R2-4K PRO dash cam models.

Check price on Amazon

Pros

• Anti-drop cable stops the camera falling and damaging
• 2 year warranty in the spec table
• ABS mount holds firm in extremely hot and cold weather
• Cup suction restores with a rinse in mild soap and water

Cons

• Fits R2-4K and R2-4K PRO models only
• No joints, rotation or cup size stated
• Spec table lists 8.81849048 lb, far above the other mounts here
• No hold weight stated

3

Glucrean Suction Cup Mount for Yi Dash Cam 2.7'

milsense·9.5/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Two suction cup mounts with a 9 lb hold and a one year guarantee, made for Yi, G1W, Black Box and Uniden dash cameras.

Check price on Amazon

Pros

• 2 mounts in the pack for another car or a spare
• 9 lb hold against a Yi camera weight of about 0.5 pound
• One year guarantee: a new mount or money back
• 2 sizes of joints fit Yi, G1W, Black Box and Transcend cameras

Cons

• Title names Glucrean while the listing brand reads milsense
• No rotation figure stated
• No suction cup size stated
• No temperature range stated

4

OctinPris Dash Camera Suction Cup Mount Dashcam

OctinPris·9.5/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A dash cam suction cup mount with 14 joints, full 360 degree rotation and a 5 cm suction cup for dash cams, GPS devices and camcorders.

Check price on Amazon

Pros

• 14 joints suit Rexing, Z Edge, Falcon, YI, VANTRUE and JVC models
• Full 360 degree rotation with a swivel ball adapter head
• 5 cm PVC cup, or 1.97 inches, performs well in hot climates
• Fits dash cams, GPS devices and camcorders

Cons

• No warranty term stated on the listing
• No hold weight stated, unlike the S10 at 11 lb and the Glucrean at 9 lb
• No temperature range stated
• No mount dimensions stated on the listing

5

Sportway S504 Pro Dash Cam Mount (5th Gen)

Sportway·9.4/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 5th generation dash cam mount with 360 degree rotation, 180 degree adjustment, 4 joints and a rotary twist-lock suction cup in POM and ABS plastic.

Check price on Amazon

Pros

• 360 degree rotation with 180 degree adjustment
• Rotary twist-lock suction discharges air for a vacuum hold
• POM and ABS plastic, sturdy and heat resistant
• Removes by pulling the suction clip, leaving no marks

Cons

• Bullets state a 53 cm cup diameter; spec table lists a 5.3 cm size
• No warranty term stated on the listing
• 4 joints, fewer than the OctinPris at 14 and the S10 at 6
• No hold weight stated

Compared on paper

Specs such as CFM, PSI and torque are the manufacturer’s ratings as listed, collected 3 November 2026. Where a listing contradicts itself, both figures are shown.

How the points were given

Each mount is scored on performance, build, value, safety and warranty, with the weights published on the How We Pick page. Two listings state a warranty term and one states a safety feature, an anti-drop cable, so safety and warranty points go only to the mounts that state them. The ranking turns on joints, rotation, hold weight and warranty.

Shop Scores range from a low of 9.2 to a high of 9.8, with each tool positioned by its weighted points proportionally, and more points always yields a higher score.

What the listings tell you

This guide draws on 5 dash cam mount listings. A suction cup size is stated on 3, a warranty term on 2, and a hold weight on 1. Two listings give a temperature range for the mount or the cup, and two carry a contradiction, one on suction cup size and one on brand. The most joints in one kit is 14, the longest warranty is 3 years, and the heaviest hold stated is 11 lb.

Buying guide: picking a best dash cam suction cup mount

Joints and fit

Joints decide whether the mount fits the camera. Kits here carry 4, 6 or 14 joints, and the Glucrean kit carries 2 sizes of joint for Yi, G1W and Black Box cameras. Check the joint list against the camera model before buying: the LIUFACAI mount is made only for R2-4K and R2-4K PRO models, while the Sportway mounts list named brands such as Rove, APEMAN, Roav, Nexar, YI and Z-Edge.

Rotation and aiming

Rotation decides how the camera aims. The S504 offers 360 degree rotation with 180 degree adjustment, the OctinPris offers full 360 degree rotation, and the S10 offers 270 degree rotation on a ball adapter head. A wider rotation range suits a camera that must aim at the driver side or the rear window as well as the road.

Suction cup and hold

The cup has to stay stuck through heat and bumps. The S10 states a 5.5 cm cup, a mount temperature range of minus 40 to 120 degrees Celsius and a cup range of minus 20 to 70 degrees Celsius, plus a bearing weight up to 5 kg (11 lb). The OctinPris states a 5 cm cup, or 1.97 inches, in PVC that performs well in hot climates. The Glucrean states a 9 lb hold from a cola hang the maker describes, against a Yi camera weight of about 0.5 pound.

Warranty and extras

Two mounts here state a warranty: the S10 with 3 years and the Glucrean with a one year guarantee, while the LIUFACAI lists a 2 year warranty in its spec table. The LIUFACAI also adds an anti-drop cable that fits at the screw interface, and the Glucrean ships 2 mounts in the pack. A stated warranty and a spare mount both lower the cost of a mount that fails on the road.

Garage Fit Check

• Check the joint list against the camera model: the LIUFACAI fits R2-4K and R2-4K PRO models only, while the other mounts list named brands.
• Clean the windshield before fitting the cup: the S10 and OctinPris listings both call for a clean and smooth surface for maximum hold.
• Check rotation against the aim needed: 360 degree mounts suit a camera that must face the driver side as well as the road.
• Confirm the cup size against the windshield space: cups here measure 5 cm, 5.5 cm and 1.97 inches where stated.
• Check the warranty before the first drive: the S10 states 3 years, the Glucrean states one year, and the LIUFACAI lists 2 years.

FAQ: garage tools

What is the best dash cam suction cup mount?

The Sportway S10 leads here with 6 joints, 270 degree rotation, an 11 lb bearing weight and a 3-year warranty. The Glucrean 2-pack suits another car or a spare, and the LIUFACAI suits R2-4K and R2-4K PRO owners who want an anti-drop cable.

Will a suction cup mount hold in hot weather?

The S10 states a mount temperature range of minus 40 to 120 degrees Celsius and a cup range of minus 20 to 70 degrees Celsius, and the OctinPris states its PVC cup performs well in hot climates. The LIUFACAI states its holder still adheres in extremely hot and cold weather. Clean the glass first: dust under the cup weakens suction.

How many joints does a dash cam mount need?

It needs the joint that fits the camera. Kits here carry 4, 6 or 14 joints, and the Glucrean carries 2 sizes of joint. Match the joint list to the camera model: a mount with 14 joints still fails if none of them fits.

Can a suction cup mount be moved to another car?

Yes. The S504 removes by pulling the suction clip and leaves no marks, and the Glucrean is made to install, remove and reposition. The LIUFACAI cup can be rinsed with mild soap and water, then air dried to restore suction and reused.

What if the dash cam falls off the mount?

The LIUFACAI adds an anti-drop cable that fits at the screw interface to stop the camera falling and damaging. For the other mounts, the listings call for a clean and smooth surface and full air removal under the cup before locking.

Related: the best dash cam for car, the best dash cam extension cable and the diagnostics and electrical hub. Also see the best dash cam hardwire kit and the best dash cam external battery pack.