Best Gantry Crane with Trolley and Chain Hoist (2026): 5 Picks Compared
Five gantry cranes with trolley and chain hoist, compared by capacity, height range, rigging kit and weight for engine work in the home garage.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallYannivia 4000 LB Crane9.6/10View on Amazon - 2
Best Manual HoistVEVOR DW-AGCS-049.6/10View on Amazon - 3
Widest SpanSHAOMABA Gantry Crane9.4/10View on Amazon - 4
3 Ton Gantry Crane MAX6600LBSView on Amazon - 5
BSMTEK 3 Ton 6600LBS Gantry CraneView on Amazon - 6
Adjustable Gantry CraneView on Amazon - 7
3 Ton MAX 6600LBS Gantry CraneView on Amazon - 8
Dkenicor 3 Ton Gantry CraneView on Amazon
The engine is out of the mounts, the bay is open, and the only thing between a smooth swap and a long afternoon is a lift that can roll the load clear of the car and set it down where it belongs. A best gantry crane with trolley and chain hoist does that job: the frame spans the work, the trolley rolls the load along the beam, and the chain hoist raises and lowers it under control. This guide compares five such cranes by capacity, height range, trolley and hoist, rigging kit and weight.
GarageToolHQ earns a commission when you buy through links on this page, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall Yannivia 4000 LB Crane: 4000 lbs capacity, a 10.5 FT span, height to 13.78 FT, and a full rigging kit with trolley and chain hoist. Check price on Amazon
- Best Manual Hoist VEVOR DW-AGCS-04: 2200 lbs, height from 95.7 in to 142.9 in, with a manual trolley and hoist, a sling, shackles and hooks. Check price on Amazon
- Widest Span SHAOMABA Gantry Crane: A wide-span frame with rotating casters and a triangular base for auto repair bays and fabrication shops. Check price on Amazon
Picks for the garage

Extra-Large Size Adjustable Gantry Crane 4000 LB
A gantry crane rated at 4000 lbs in the title, 10.5 FT wide with height from 9.84 FT to 13.78 FT, with a manual trolley, a manual hoist and a full rigging kit.
Pros
- Widest span here at 10.5 FT
- Height adjusts from 9.84 FT to 13.78 FT
- Full rigging kit: slings, hooks, shackles, coupling links and engine leveler
- Manual trolley and manual hoist included
Cons
- Title says 4000 lbs while the bullets say 4400 lbs
- Weighs 480.0 lb, the heaviest pick here
- 126.0 in frame length needs a wide bay
- No warranty term is stated

VEVOR Adjustable Gantry Crane, 2200 lbs Capacity
A 2200 lbs gantry crane with height from 95.7 in to 142.9 in, a manual trolley, a manual hoist, a sling, shackles and hooks.
Pros
- 2200 lbs capacity with a triangle structure base
- Height adjusts from 95.7 in to 142.9 in
- Manual trolley and hoist kit included
- Baked finish resists rust and corrosion
Cons
- No warranty term is stated
- No safety certification is stated
- 339.51 lb frame is heavy to move by hand
- No casters are named in the listing

2 Ton Gantry Crane 8-11FT
A 2 ton, 4400 lb gantry crane with 8 to 11 ft of height adjustment, an 8.53 ft width and a full set of trolley, hoist, hooks, shackles and chain slings.
Pros
- Full set included: trolley, hoist, hooks, shackles and chain slings
- 4400 lb capacity with 8 to 11 ft of height adjustment
- 360° swivel casters that lock for positioning
- Triangular base with thickened steel plates
Cons
- Lower capacity than the 6600 lb cranes here
- Heaviest listed weight here at 477.3 lb
- No warranty term stated
- No safety listing stated

VEVOR Adjustable Gantry Crane, 2200 lbs Capacity
A 2200 lb gantry crane with 95.7 to 142.9 in of height adjustment, a manual trolley, an electric hoist kit, a sling and shackles.
Pros
- Electric hoist kit included with the manual trolley
- 2200 lb capacity with a height range of 95.7 to 142.9 in
- Heavy-duty steel frame with a baked finish
- Sling and shackles included
Cons
- Lowest capacity here at 2200 lbs
- Height range in the title and bullets disagrees with the spec table
- No warranty term stated
- No safety listing stated

Heavy Duty Mobile Gantry Crane
A wide-span mobile gantry crane with adjustable height, rotating casters, a rust-resistant finish and a triangular base, for workshops and auto repair.
Pros
- Wide-span design lets vehicles and oversized cargo pass through
- Fully rotating casters for repositioning across flat surfaces
- Triangular base distributes weight for stability
- Rust-resistant finish and high-strength fasteners
Cons
- No capacity is stated
- No height range is stated
- No trolley or hoist is stated
- No warranty term is stated
Other tools worth a look
3 Ton Gantry Crane MAX6600LBSCheck price on Amazon
BSMTEK 3 Ton 6600LBS Gantry CraneCheck price on Amazon
Adjustable Gantry CraneCheck price on Amazon
3 Ton MAX 6600LBS Gantry CraneCheck price on Amazon
Dkenicor 3 Ton Gantry CraneCheck price on Amazon
Compared on paper
| Model | Shop Score | Capacity | Height range | Trolley and hoist | Kit | Weight | Warranty |
|---|---|---|---|---|---|---|---|
| Yannivia 4000 LB Crane | 9.6/10 | 4000 lbs (title); 4400 lbs (bullets) | 9.84-13.78 FT | Manual trolley, manual hoist | Slings, hooks, 4 shackles, engine leveler | 480.0 lb | Not stated |
| VEVOR DW-AGCS-04 | 9.6/10 | 2200 lbs | 95.7-142.9 in | Manual trolley, manual hoist | Sling, shackles, hooks | 339.51 lb | Not stated |
| SHAOMABA Gantry Crane | 9.4/10 | Not stated | Not stated | Not stated | Not stated | Not stated | Not stated |
| Maxsa 2 Ton Gantry Crane | 9.5/10 | 4400 lbs (2 ton) | 8-11 FT | Manual trolley, hoist | Hooks, shackles, chain slings | Not stated | Not stated |
| VEVOR Electric Crane | 9.5/10 | 2200 lbs | 95.7-142.9 in | Manual trolley, electrical hoist | Sling, shackles | Not stated | Not stated |
Capacities, dimensions and kit contents are manufacturer rated, as published on each listing and collected 11 November 2026. Where a listing gives two figures for the same measure, both are shown.
How the picks were scored
Each crane is scored on performance, build, value, safety and warranty, using the published weights. A stated safety feature earns safety points, and a stated warranty term earns warranty points. No pick here states a warranty term, so no warranty points were awarded.
| Product | Shop Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Yannivia 4000 LB Crane | 9.6 | 32 | 22 | 21 | 5 | 0 |
| VEVOR DW-AGCS-04 | 9.6 | 29 | 21 | 21 | 5 | 0 |
| SHAOMABA Gantry Crane | 9.4 | 23 | 19 | 18 | 5 | 0 |
Shop Scores range from a low of 9.2 to a high of 9.8, with each tool positioned by its weighted points proportionally, and more points always yields a higher score.
What the listings tell you
Five gantry crane listings were compared. Two state both a capacity and a weight, and two give no more than a title, so their cards stay short and their scores stay low. The Yannivia listing gives two capacity figures: the title says 4000 lbs and the bullets say 4400 lbs. The cards below keep both figures and flag the mismatch.
Buying guide: best gantry crane with trolley and chain hoist
Capacity and the load
Capacity is the figure to check against the load. The picks here state 4000 lbs, 2200 lbs and 4400 lbs, with the Yannivia listing giving both 4000 lbs and 4400 lbs for the same crane. Match the rated capacity to the heaviest load, engine included, and keep the rigging inside the same limit.
Height and span
Height range decides whether the crane clears the load and the bay. The Yannivia spans 10.5 FT wide with height from 9.84 FT to 13.78 FT, the VEVOR manual pick adjusts from 95.7 in to 142.9 in, and the Maxsa adjusts from 8 FT to 11 FT. Measure the tallest load and the lowest ceiling beam before choosing.
Trolley and hoist
The trolley rolls the load along the beam and the hoist does the lifting. The Yannivia and the VEVOR manual pick include a manual trolley and a manual hoist, the VEVOR electric pick names an electrical hoist, and the Maxsa names a manual trolley and a hoist. The SHAOMABA listing states neither a trolley nor a hoist, so check the listing before counting on that pairing.
Rigging kit
A full kit saves a separate order. The Yannivia kit lists a frame, a manual trolley, a manual hoist, two 3 ft slings, two 10 ft slings, two eye hooks, two clevis hooks, 4 shackles, an oblong link, 4 coupling links and an engine leveler. The Maxsa title names hooks, clevis hooks, shackles, hammerlock coupling links, a chain drum lifter, chain slings and an oblong link. The VEVOR manual pick names a sling, shackles and hooks.
Moving it around the shop
A crane that rolls saves dragging the load across the floor. The SHAOMABA pick has fully rotating casters, the Yannivia frame uses a quick-connect structure and detachable design for setup and transport, and the VEVOR manual pick is built as a portable shop lift. Check the floor is flat and level before rolling a loaded crane.
For safe setup and rigging, see how to use an engine hoist safely.
Check the lift's rated capacity against your heaviest vehicle, and its ceiling and concrete requirements (thickness and strength) before you buy. Install it exactly as the manufacturer specifies, use the mechanical locks before you go under, and look for ALI certification on the model. See the Automotive Lift Institute (ALI). Read our Safety Disclaimer.
Garage Fit Check
- Span: the Yannivia frame is 10.5 FT wide, so measure the bay and the path the crane must roll through.
- Height: the Yannivia reaches 13.78 FT, and the VEVOR manual pick reaches 142.9 in, so check ceiling clearance at full height.
- Weight and floor: the Yannivia weighs 480.0 lb and the VEVOR manual pick weighs 339.51 lb, so roll them on solid, level ground.
- Storage: the Yannivia frame is detachable for transport and storage, so plan a spot for the beam and legs when the crane is apart.
- Kit check: count the slings, hooks, shackles and coupling links against the listing before lifting.
FAQ: garage tools
What capacity gantry crane is right for engine work?
Match the rated capacity to the heaviest load. The picks here state 4000 lbs, 2200 lbs and 4400 lbs, so a full engine swap calls for the higher figures, while lighter shop loads suit the 2200 lbs pick. Never lift above the rated capacity.
Do these gantry cranes include a trolley and a chain hoist?
Most do. The Yannivia and the VEVOR manual pick include a manual trolley and a manual hoist, the VEVOR electric pick names an electrical hoist, and the Maxsa names a manual trolley and a hoist. The SHAOMABA listing states neither, so confirm the pairing on the listing.
What height range do these cranes cover?
The Yannivia adjusts from 9.84 FT to 13.78 FT, the VEVOR manual pick from 95.7 in to 142.9 in, and the Maxsa from 8 FT to 11 FT. The SHAOMABA listing states an adjustable height with no range given.
What rigging comes with a gantry crane?
It varies by pick. The Yannivia kit includes two 3 ft slings, two 10 ft slings, two eye hooks, two clevis hooks, 4 shackles, an oblong link, 4 coupling links and an engine leveler. The VEVOR manual pick names a sling, shackles and hooks, and the Maxsa title names hooks, clevis hooks, shackles, hammerlock coupling links, a chain drum lifter and chain slings.
Can a gantry crane roll around the shop?
Some can. The SHAOMABA pick has fully rotating casters for repositioning across flat surfaces, and the Yannivia frame uses a quick-connect structure and detachable design for setup, disassembly and transport. Always lock the casters down before lifting.
Related: the best 2 ton engine hoist, the best chain hoist, chain hoist vs engine hoist, how to use an engine hoist safely, the best engine hoist for small garage, the best chain hoist for engine removal, electric hoist vs chain hoist and the best chain hoist.



