Best Jack Stands for Tesla Model Y (2026): 4 Picks Compared

A tire rotation in the garage turns into a longer job the moment the car needs to stay up safely while the wheels come off. The best jack stands for tesla model y are the ones whose capacity, height range and locking design match the lift points and the work planned. We compared four stands by capacity, height range, locking, saddle and stated certification, using only what each listing publishes. Underbody work means the stands carry the car while hands and tools work beneath it, so the locking design and the base matter as much as the capacity figure.

GarageToolHQ earns a commission when you buy through links on this page, at no extra cost to you. Read our affiliate disclosure.

Picks for the garage

#	Product	Shop Score	Buy
1	3 Ton Performance Jack Stands, Pair	9.8/10	Buy on Amazon
2	ANTPOWER Car Jack Stands 3 Ton (6,600 lbs)	9.7/10	Buy on Amazon
3	ESCO 3 Ton Performance Shorty Low Profile Jack	9.7/10	Buy on Amazon
4	YATOINTO Jack Stands 6 Ton (13,200 LBs)	9.6/10	Buy on Amazon

1

3 Ton Performance Jack Stands, Pair

ESCO·9.8/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A pair of 3 ton stands with a 13.2 to 21.5 in lift range, 10 pin-lock height positions, a flat rubber saddle and ASME compliance.

Check price on Amazon

Pros

• Tall 21.5 in maximum height provides ample working clearance
• Flat circular rubber saddle protects vehicle frame and pinch welds
• 10 pin-lock positions eliminate ratchet pawl slip concerns
• Meets ASME standards via an A2LA certified facility

Cons

• 13.2 in minimum height is too tall for low-slung vehicles
• 26 lb pair weight requires more effort to move and store
• Pin-lock adjustment takes longer than quick ratchet bars
• Large 12 x 12 in base occupies significant garage floor space

2

ANTPOWER Car Jack Stands 3 Ton (6,600 lbs)

LIFTING TOOLS ANTPOWER·9.7/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A pair of double-locking steel jack stands rated 3 tons per stand, from 11.22 to 16.77 in, with a ductile iron ratchet and side pin.

Check price on Amazon

Pros

• Rated 3 tons (6,600 lb) per stand
• Ratchet plus side pin lock
• 2 year manufacturer warranty
• Wide pyramid base, powder coated

Cons

• Claims ASME without naming PASE
• Not for trucks over 16 in chassis height, per the listing
• Capacity given as 6,000 and 6,600 lb
• Newer brand

3

ESCO 3 Ton Performance Shorty Low Profile Jack

ESCO·9.7/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Low-profile 3-ton jack stands with an 11 in minimum height, 7 height positions and a stated ASME standards compliance, sold as a pair.

Check price on Amazon

Pros

• 11 in minimum height, the lowest stated here
• 7 adjustable height positions
• 6,000 lb capacity per stand, 3 ton rating
• Anodized post and powder coated base resist rust

Cons

• 17 in maximum height, the shortest max here
• No safety pin is stated on the listing
• Base given as 9.5 x 9.5 in in the bullets and 10 x 10 in in the item dimensions

4

YATOINTO Jack Stands 6 Ton (13,200 LBs)

YATOINTO·9.6/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 6-ton pair with 13 height levels, double pin locking and rubber pads.

Check price on Amazon

Pros

• 6 ton (13,200 lb) capacity with a lifting range from 15.6 to 23.4 in
• 13 levels of adjustable height on a serrated ratchet bar
• Double safety design: handle adjustment locking ratchet bar plus a removable metal safety pin
• Durable rubber pads protect the chassis contact points from damage and scratches

Cons

• No ASME PASE certification is stated
• No warranty term is stated anywhere in the listing data
• Color listed as Black+Orange while the title says Black
• Capacity is given for the pair, with no per-stand split stated

Compared on paper

Specs are the manufacturer’s ratings as listed, collected 29 October 2026.

How the points were given

Each stand is scored on performance, build, value, safety and warranty, with the weights published on our How We Pick page. Safety points follow the stated certification: an ASME listing earns them, while an unnamed standards claim does not. None of the four picks states a warranty term, so warranty scores are zero across the list. The ANTPOWER pair ranks first on its ASME certified saddle, while the YATOINTO pair follows on capacity and height range.

Shop Scores range from a low of 9.2 to a high of 9.8, with each tool positioned by its weighted points proportionally, and more points always yields a higher score. Where a tool neither runs on power nor lists a safety feature, safety shows n/a and the other 90 points decide.

How to choose the best jack stands for tesla model y

Capacity per stand, not per pair

Capacity figures are not always split the same way. The ANTPOWER listing states 6,600 lb per stand, so the figure applies to each stand on its own. The YATOINTO listing gives 6 ton (13,200 lb) for its pair without splitting it per stand. The ESCO titles give a 3-ton rating with no split at all. Compare per-stand figures where the listing gives them, and treat an unsplit figure as a pair figure until the listing says otherwise. A stand rated per stand leaves no doubt about what each corner carries, while a pair figure needs the split confirmed before the purchase.

Height range and saddle fit

The YATOINTO pair adjusts from 15.6 to 23.4 in across 13 levels, while the ANTPOWER pair adjusts from 11.22 to 16.77 in. A taller range suits higher lift points, while a lower range suits cars that sit closer to the ground. The ANTPOWER saddle is large and concave, and the YATOINTO stands add rubber pads over the contact points. Never get under a vehicle supported only by a jack: use rated stands on solid, level ground, and check the owner’s manual lift points before lifting.

Locking design and base

Both full-data stands lock twice: the YATOINTO pair pairs a ratchet bar with a removable safety pin, while the ANTPOWER pair pairs a self-locking ratchet with a side pin. Both stand on wide pyramid bases. A second lock matters because it holds the height if the ratchet slips, and a wide base spreads the load on the garage floor. The ESCO titles state no locking type, so check the listing before ordering if a second lock matters. Check that the pin seats fully before lowering weight onto the stands, since the pin is the second lock on both full-data pairs.

What the title-only picks can and cannot tell you

The two ESCO titles give a 3-ton rating, a performance line name and a pair quantity, and the shorty title adds a low profile shape. They give no height range, no locking type, no saddle detail and no warranty term. That thin data is why both ESCO picks rank below the full-data pairs, even though the 3-ton rating matches the ANTPOWER figure. The shorty shape is the only extra detail between the two ESCO titles, which is why the shorty pair ranks just above the plain pair. Check the full listing before ordering if any of those missing figures decides the purchase.

Garage Fit Check

• Check the height range against the owner’s manual lift points: 15.6 to 23.4 in on the YATOINTO pair, 11.22 to 16.77 in on the ANTPOWER pair.
• Keep the removable safety pins with the stands, since both full-data pairs lock twice.
• Confirm the saddle fits the lift point before lowering weight onto the stands.
• Use solid, level ground: a wide pyramid base still needs a flat floor.
• Count the stands: each listing here is a pair, so one pair covers two lift points.

FAQ: garage tools

What capacity do these jack stands offer?

The YATOINTO pair is rated 6 ton (13,200 lb), and the ANTPOWER stands are rated 6,600 lb per stand. The ESCO titles give a 3-ton rating with no further split. The ESCO rating comes from the title alone, with no further split.

What height ranges do the full-data stands cover?

The YATOINTO pair adjusts from 15.6 to 23.4 in across 13 levels. The ANTPOWER pair adjusts from 11.22 to 16.77 in. The ESCO titles state no height range.

Which stands state a safety certification?

The ANTPOWER stands meet ASME certifications, with an ASME certified safety saddle. The YATOINTO listing states US safety standards without naming ASME PASE. The ESCO titles state no certification.

Can one pair hold a car for underbody work?

A pair covers two lift points, so a four-corner lift needs two pairs, but never get under a vehicle supported only by a jack. Use rated stands on solid, level ground, and check the owner’s manual lift points before starting work.

Do the stands come with rubber pads?

The YATOINTO stands include rubber pads for the chassis contact points. Pads are not stated for the other three picks, so add pads separately if the saddle contact needs protection.

More garage guides

See every jacks and stands guide.

Related: 3 ton jack stands, 2 ton jack stands, floor jack for home garage.