Best Saw for Cutting PVC Pipe (2026): 5 Picks Compared
5 hand saws for cutting PVC pipe, compared by blade length, TPI, materials cut and handle, ranked for home plumbing jobs.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallHAUTMEC PVC Pipe Saw9.7/10View on Amazon - 2
Best HacksawKlein Tools 314329.6/10View on Amazon - 3
Best CompactKATA Mini Hacksaw9.6/10View on Amazon - 4
Best General-PurposeQYQRQF Pro Hand Saw9.5/10View on Amazon
A Saturday plumbing repair starts with a length of PVC pipe that needs one clean, square cut before a fitting will seat properly. A rough or angled cut leaves a gap that glue cannot fix, so the saw matters more than the pipe. This roundup of the best saw for cutting PVC pipe compares hand saws by blade length, tooth count, materials cut and handle, so the right saw is easy to pick for home plumbing jobs.
GarageToolHQ earns a commission when you buy through links on this page, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall HAUTMEC PVC Pipe Saw: 11 inch pipe saw, 10 TPI, 1 mm steel blade and 11 locking angle positions. Check price on Amazon
- Best Hacksaw Klein Tools 31432: 10 inch 24 TPI bi-metal blade with tool-free exchange and an extendable blade. Check price on Amazon
- Best Compact KATA Mini Hacksaw: 10 inch aluminum frame, 3 bi-metal 24 TPI blades, light at 0.3 pounds. Check price on Amazon
- Best General-Purpose QYQRQF Pro Hand Saw: 14 inch 11 TPI hand saw in 0.9 mm 65Mn steel for wood and plastic pipe. Check price on Amazon
Picks for the garage

HAUTMEC 11-Inch PVC Pipe Saw
An 11 inch PVC pipe saw with a 1 mm thick high-carbon steel blade, 10 TPI double-ground teeth and an 11-position adjustable angle handle with a die-cast aluminum core and anti-slip TPR grip.
Pros
- 10 TPI double-ground teeth for fast, smooth cuts in PVC
- 11 locking positions for angle adjustment in tight spaces
- 1 mm thick high-carbon steel blade for straight, precise cuts
- Die-cast aluminum handle with anti-slip TPR grip
Cons
- No warranty term stated
- No safety listing stated
- 10 TPI leaves a coarser edge than a 24 TPI hacksaw blade
- Plastic, ABS, drywall and wood only, with no metal cutting listed

Klein Tools 31432 Compact Medium-Cut Hacksaw
A compact 10 inch hacksaw with a 24 TPI bi-metal blade, tool-free blade exchange, an extendable blade for hard-to-reach places and a contoured overmolded handle.
Pros
- 24 TPI bi-metal blade cuts PVC, PEX and ABS pipes
- Tool-free lever for quick blade exchange
- Blade extends to cut in hard-to-reach places
- Blade flexes with the cut for flush cuts
Cons
- No warranty term stated
- No safety listing stated
- 10 inch blade, short for long straight cuts
- No spare blade included

KATA 10 Inch Mini Hacksaw for Metal Cutting
A compact 10 inch mini hacksaw with 3 bi-metal 24 TPI blades, an aluminum frame and an ergonomic handle, made for light cuts on PVC, plastic, metal rods, tubing and bolts.
Pros
- 3 bi-metal 24 TPI blades included
- 10 inch compact aluminum frame for tight spaces
- Light at 0.3 pounds
- Ergonomic handle for a secure hold
Cons
- Limited warranty with no term stated
- No safety listing stated
- Light-duty only, not for heavy-duty demolition
- 10 inch blade for short, precise cuts only

Pipe Saw 240mm
A 240 mm pipe saw, model 8006, sized at 16.7 x 3.5 x 1.1 inches and listed at 0.3 oz, built as a dedicated pipe saw.
Pros
- Dedicated pipe saw, model 8006
- 240 mm size for pipe cutting
- Light at 0.3 oz
- Compact at 16.7 x 3.5 x 1.1 inches
Cons
- Tooth count not stated
- Materials cut not stated
- No warranty term stated
- No safety listing stated

14 in. Pro Hand Saw, 11 TPI Fine-Cut Soft-Grip
A 14 inch pro hand saw with an 11 TPI blade, 0.9 mm thick 65Mn heat-treated steel and a soft-grip ergonomic non-slip TPR handle, for wood, plastic pipe, plywood and wallboard.
Pros
- 14 inch blade for wood and plastic pipe
- 11 TPI fine-cut blade
- 0.9 mm thick 65Mn heat-treated steel blade
- Soft-grip ergonomic non-slip TPR handle
Cons
- No warranty term stated
- No safety listing stated
- General-purpose saw, not a PVC-first tool
- 14 inch size needs more storage than a 10 inch hacksaw
Other tools worth a look
GALAX PRO 120V Reciprocating SawCheck price on Amazon
Geinxurn 6PCS Impact Small Thinwall Hole Saw SetCheck price on Amazon
KFMK Tabletop Band SawCheck price on Amazon
WORKPRO 20V Cordless Metal Cutting Band SawCheck price on Amazon
Compared on paper
| Model | Shop Score | Blade | TPI | Cuts | Handle |
|---|---|---|---|---|---|
| HAUTMEC PVC Pipe Saw | 9.7/10 | 11 inch | 10 TPI | PVC, ABS, plastic, drywall, wood | Adjustable angle, aluminum with TPR grip |
| Klein Tools 31432 | 9.6/10 | 10 inch | 24 TPI | PVC, PEX, ABS, copper, aluminum, wood | Contoured overmolded |
| KATA Mini Hacksaw | 9.6/10 | 10 inch | 24 TPI | PVC, plastic, metal rods, tubing, bolts | Ergonomic |
| ZETSAW 240 Pipe Saw | 9.5/10 | 240 mm | Not stated | Not stated | Not stated |
| QYQRQF Pro Hand Saw | 9.5/10 | 14 inch | 11 TPI | Wood, plastic pipe, plywood, wallboard | Soft-grip non-slip TPR |
We copy each listing’s rated specs exactly as the manufacturer gives them; as of 15 November 2026.
How the points were given
Each saw is scored out of 10 on performance, build, value, safety and warranty, with the weights published on the How We Pick page. None states a UL, ETL or CSA listing, so all score zero on safety, and none gives a clear warranty term.
| Product | Shop Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| HAUTMEC PVC Pipe Saw | 9.7 | 32 | 22 | 21 | n/a | 0 |
| Klein Tools 31432 | 9.6 | 30 | 22 | 20 | n/a | 0 |
| KATA Mini Hacksaw | 9.6 | 29 | 21 | 21 | n/a | 0 |
| ZETSAW 240 Pipe Saw | 9.5 | 28 | 20 | 19 | n/a | 0 |
| QYQRQF Pro Hand Saw | 9.5 | 27 | 20 | 19 | n/a | 0 |
The displayed number is the weighted point total scaled linearly between 9.2 and 9.8. Earning more points is the only way up. Where a tool neither runs on power nor lists a safety feature, safety shows n/a and the other 90 points decide.
What the listings tell you
All 5 listings state a blade length, and 4 state a TPI figure. The blade lengths run from a 10 inch hacksaw blade to a 14 inch hand saw blade, and the pipe saw is listed at 240 mm. None states a warranty term, and none states a safety listing.
Buying guide: the best saw for cutting PVC pipe
Blade length and TPI
Blade length sets how much stroke each pull gives, and TPI sets how fine the cut runs. The picks list 10 inch, 11 inch and 14 inch blades, plus a 240 mm pipe saw blade. TPI runs from 10 TPI on the HAUTMEC pipe saw to 24 TPI on the KATA and Klein hacksaws, with 11 TPI on the QYQRQF hand saw. A finer tooth count suits thin-wall plastic pipe, while a coarser tooth count clears chips faster on thicker plastic.
What each saw cuts
The KATA, Klein and HAUTMEC saws name PVC pipe in the listing. The Klein saw also lists thin wall copper and aluminum, PEX and ABS pipes, and wood. The HAUTMEC saw also lists acrylic, polycarbonate, ABS, drywall and wood. The QYQRQF hand saw lists plastic pipe, wood, plywood and wallboard. The ZETSAW pipe saw lists no material, so check before ordering.
Handle and control
A secure grip matters when the cut has to stay square. The KATA saw has an ergonomic handle, the Klein saw has a contoured overmolded handle, and the QYQRQF saw has a soft-grip ergonomic non-slip TPR handle. The HAUTMEC saw pairs a die-cast aluminum handle core with an anti-slip TPR surface, and its handle adjusts through 11 locking positions for tight wall cavities and under-sink areas. The Klein blade extends for hard-to-reach places, and its blade flexes for flush cuts.
Hacksaw or pipe saw
A hacksaw suits a toolbox and light repair work: the KATA saw is a 10 inch compact frame with 3 blades, and the Klein saw is a 10 inch compact hacksaw with tool-free blade exchange. A pipe saw suits plumbing work: the HAUTMEC saw is an 11 inch pipe saw with an adjustable angle handle, and the ZETSAW saw is a 240 mm pipe saw. The QYQRQF saw is a 14 inch hand saw for wood, plastic pipe, plywood and wallboard. For powered cutting, a cordless reciprocating saw is a different class of tool. Pick the shape that matches the job, and keep the blade length in mind for the space around the pipe.
Read the manual before first use, wear eye protection, keep the work area clear and ventilated, and stay within every stated rating. Read our Safety Disclaimer.
Garage Fit Check
- The KATA saw is a 10 inch compact frame that fits toolbox storage, and the HAUTMEC saw is an 11 inch compact design that fits standard tool bags.
- The Klein saw is built for low-clearance areas, and its blade extends to cut in hard-to-reach places.
- The HAUTMEC handle adjusts through 11 locking positions for tight wall cavities, under-sink areas and narrow trenches.
- The QYQRQF blade ships with plastic protection on the teeth and a hard paper sleeve around the blade.
- Secure the material before cutting and use steady strokes.
FAQ: garage tools
Which saw is best for cutting PVC pipe?
The best saw for cutting PVC pipe for home plumbing jobs is the HAUTMEC pipe saw, with a 10 TPI double-ground tooth design, a 1 mm thick high-carbon steel blade and an 11-position adjustable angle handle. For tight spaces, the Klein hacksaw is the compact pick, with a 10 inch 24 TPI bi-metal blade that also cuts PEX and ABS pipes.
What TPI should a saw for PVC pipe have?
The picks here list 10 TPI, 11 TPI and 24 TPI. The HAUTMEC pipe saw lists 10 TPI with double-ground teeth, the QYQRQF hand saw lists 11 TPI, and the KATA and Klein hacksaws list 24 TPI bi-metal blades. Pick the tooth count that matches the pipe wall on the job.
Can a hacksaw cut PVC pipe?
Yes. The KATA mini hacksaw and the Klein compact hacksaw both list PVC pipe among the materials they cut, with 24 TPI bi-metal blades. Both are compact 10 inch saws made for light cuts in tight spaces, so secure the pipe and use steady strokes.
Can a hand saw cut plastic pipe?
Yes. The QYQRQF hand saw lists plastic pipe among the materials it cuts, with an 11 TPI blade, a 14 inch length and a soft-grip non-slip TPR handle. It also lists wood, plywood and wallboard, so it suits mixed repair work around the home and garage.
What blade length suits PVC pipe?
Blade length on the picks here runs from 10 inch to 14 inch, with a 240 mm pipe saw as well. A 10 inch hacksaw suits light cuts in tight spaces, an 11 inch pipe saw suits plumbing work with an adjustable angle handle, and a 14 inch hand saw suits longer strokes on plastic pipe and wood. Check the space around the pipe before choosing.
Related: the saws and grinders hub, the best band saw for woodworking, the best circular saw blade and the best tool bag for power tools.




