Best Sawhorse Heavy Duty (2026)
Heavy duty folding sawhorses compared by pair capacity, height adjustment, frame material, clamps and folding storage for garage work.
On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Highest CapacityBORA Workhorse XT9.7/10View on Amazon - 2
Simplest SetupBORA Workhorse X9.7/10View on Amazon - 3
Storage PickEHHLY Folding Sawhorse9.6/10View on Amazon - 4
Clamping PickZYJOYY Clamp Sawhorse9.5/10View on Amazon - 5
Pony Portable Folding Work TableView on Amazon - 6
ZYLOQUEX Adjustable Folding Saw Horses 2 PackView on Amazon - 7
PRO SOURCE Folding Steel Sawhorse: Sturdy Space Saving DesignView on Amazon - 8
Forup Portable Folding SawhorseView on Amazon - 9
Saw Horses 2 Pack FoldingView on Amazon
A Saturday in the garage starts with trim work on the bench and ends with lumber resting across sawhorses while you measure, mark and cut. A weak pair flexes under the load, so this guide to the best sawhorse heavy duty picks compares folding pairs by pair capacity, height adjustment, frame material, clamps and folding storage.
GarageToolHQ earns a commission when you buy through links on this page, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Highest Capacity BORA Workhorse XT: 2700-lb pair capacity with legs that adjust from 30 in to 34 in. Check price on Amazon
- Simplest Setup BORA Workhorse X: 2700-lb pair capacity with a single release latch and gravity assisted deployment. Check price on Amazon
- Storage Pick EHHLY Folding Sawhorse: Built-in shelf and cord hooks with telescopic steel legs and anti-slip feet. Check price on Amazon
- Clamping Pick ZYJOYY Clamp Sawhorse: Bar clamps plus 2 bench dogs hold work in place for cutting and assembly. Check price on Amazon
Picks for the garage
BORA Workhorse XT Saw Horses 2 Pack Adjustable
An all metal folding pair with legs that adjust from 30 in to 34 in in 1 in increments, pre-drilled 2x4 brackets, a single release latch and a built-in bottle opener.
Pros
- 2700-lb pair capacity, 1350 lbs per sawhorse
- Legs adjust from 30 in to 34 in in 1 in increments
- Single release latch with gravity assisted deployment
- Pre-drilled 2x4 brackets link pairs into a workbench
Cons
- No warranty term is stated
- No UL, ETL or CSA listing is stated
- Height moves in 1 in steps rather than continuously
- Bottle opener is a bonus, not a work feature
BORA Workhorse X Saw Horses 2 Pack Folding Heavy
An all metal folding pair with a 2700-lb pair capacity, pre-drilled 2x4 brackets and a single release latch, folding inside itself for storage.
Pros
- 2700-lb pair capacity, 1350 lbs per sawhorse
- Single release latch with gravity assisted deployment
- Pre-drilled 2x4 brackets link pairs into a workbench
- Legs fold inside the sawhorse for compact storage
Cons
- No height adjustment is stated
- No warranty term is stated
- No UL, ETL or CSA listing is stated
- Spec table dimensions of 0.4 inches are not useful for planning space
EHHLY Folding Heavy Duty Sawhorses 2 Pack
A folding pair with a PP plastic body, powder-coated steel telescopic legs, a built-in shelf, cord hooks and anti-slip feet, stating a 2500-lb total.
Pros
- 2500-lb total capacity
- Telescopic steel legs extend and lock at multiple heights
- Anti-slip feet steady the pair on uneven surfaces
- Built-in shelf and cord hooks keep tools close
Cons
- Spec table lists 1 item while the title states a 2 pack
- No warranty term is stated
- No UL, ETL or CSA listing is stated
- PP plastic body instead of an all metal frame
WORKESS Metal Saw Horses 2 pack Folding Heavy Duty
An all metal folding pair in 25 mm square tube steel with 7 levels of height adjustment from 80 cm to 130 cm and safety bolts for leg fixation.
Pros
- 7 levels of height adjustment from 80 cm to 130 cm
- 25 mm square tube steel frame
- Triangular leg structure with safety bolts
- Folding design for storage and transport
Cons
- 880 lbs capacity is the lowest in this set
- No warranty term is stated
- No UL, ETL or CSA listing is stated
- Height given in cm, not inches
ZYJOYY Saw Horses 2 Pack-Folding Heavy Duty
A folding pair with integrated bar clamps, 2 bench dogs, a built-in tool tray and cord hooks, stating 1000 lbs of load capacity.
Pros
- Bar clamps fasten work in vertical and horizontal positions
- Clamps detach for use on another workspace
- 2 bench dogs hold the workpiece for cutting and assembly
- 4 lbs each for easy carrying and corner storage
Cons
- Clamp pressure stated as both 300 lbs and 250 lbs
- 1000 lbs capacity is below the BORA and EHHLY pairs
- No warranty term is stated
- No UL, ETL or CSA listing is stated
Other tools worth a look
Pony Portable Folding Work TableCheck price on Amazon
ZYLOQUEX Adjustable Folding Saw Horses 2 PackCheck price on Amazon
PRO SOURCE Folding Steel Sawhorse: Sturdy Space Saving DesignCheck price on Amazon
Forup Portable Folding SawhorseCheck price on Amazon
Saw Horses 2 Pack FoldingCheck price on Amazon
Compared on paper
| Model | Shop Score | Pair capacity | Height adjustment | Frame | Extras |
|---|---|---|---|---|---|
| BORA Workhorse XT | 9.7/10 | 2700 lbs | 30 in to 34 in | All metal | Bottle opener |
| BORA Workhorse X | 9.7/10 | 2700 lbs | Not stated | All metal | 2×4 brackets |
| EHHLY Folding Sawhorse | 9.6/10 | 2500 lbs | Telescopic legs | PP plastic, steel legs | Shelf and cord hooks |
| WORKESS Metal Sawhorse | 9.5/10 | 880 lbs | 80 cm to 130 cm | 25 mm steel tube | Safety bolts |
| ZYJOYY Clamp Sawhorse | 9.5/10 | 1000 lbs | Not stated | Not stated | Bar clamps, bench dogs |
Specifications are manufacturer rated, as published on each listing. Where a listing contradicts itself, both figures are shown.
How the points were given
Each sawhorse is scored on performance, build, value, safety and warranty. How we pick explains the weights. None states a UL, ETL or CSA listing, and none states a clear warranty term, so safety and warranty add nothing to any score here.
| Product | Shop Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| BORA Workhorse XT | 9.7 | 32 | 22 | 21 | n/a | 0 |
| BORA Workhorse X | 9.7 | 30 | 22 | 21 | n/a | 0 |
| EHHLY Folding Sawhorse | 9.6 | 28 | 20 | 20 | n/a | 0 |
| WORKESS Metal Sawhorse | 9.5 | 26 | 21 | 19 | n/a | 0 |
| ZYJOYY Clamp Sawhorse | 9.5 | 26 | 19 | 20 | n/a | 0 |
Scores run from 9.2 to 9.8: each product’s point total is placed on that range, so more points always means a higher score. Safety counts only for powered gear or where the listing states safety features; where it does not apply, the score is taken over the remaining 90 points.
What the listings tell you
We read 5 sawhorse listings. All 5 stated a pair capacity, while 3 described adjustable legs. None stated a UL, ETL or CSA listing, and none stated a clear warranty term. One listing contradicted itself on clamp pressure, and one listed a pack count that disagreed with its title.
Best sawhorse heavy duty buying guide
Pair capacity
Pair capacity is the headline figure, and the listings here range from 880 lbs to 2700 lbs for the pair. Match the figure to the load: a pair rated well above the heaviest board leaves margin. The BORA pairs state 1350 lbs per sawhorse, which the listings add up to 2700 lbs for the pair.
Height adjustment
Adjustable legs suit uneven garage floors and taller work. The BORA Workhorse XT adjusts from 30 in to 34 in in 1 in increments, the WORKESS pair moves through 7 levels from 80 cm to 130 cm, and the EHHLY legs extend and lock at multiple heights. A fixed pair suits a flat floor, but check the working height before buying.
Frame material
All metal frames dominate this set: both BORA pairs fold from all metal construction with steel leg latches, and the WORKESS pair uses 25 mm square tube steel. The EHHLY pair mixes a PP plastic body with powder-coated steel legs while still stating a 2500-lb total. Metal frames suit rough handling; plastic bodies suit a pair that gets carried often.
Clamps and extras
Clamps turn a sawhorse into a work holder. The ZYJOYY pair adds bar clamps with 18-inch rods and 2 bench dogs, plus a built-in tool tray and cord hooks. The EHHLY pair adds a built-in shelf and cord hooks, and the BORA Workhorse XT adds a built-in bottle opener. Pick clamps when you cut alone; pick a shelf and hooks when small tools and cords clutter the bench.
Fold and store
Every pair here folds for storage, which matters in a crowded garage. The BORA legs fold inside the sawhorse, the EHHLY pair folds flat for easy storage, and the ZYJOYY pair weighs 4 lbs each for carrying to a job. Keep the latches clear of sawdust so they keep working.
Use rated jack stands on solid ground, wear eye protection with power and air tools, keep fuel-burning equipment out of a closed garage, and follow the manual for every tool. Read our Safety Disclaimer.
Garage Fit Check
- Floor space: a pair needs room to stand with legs fully spread, plus space to walk around lumber resting on top.
- Storage: folded pairs lean against a wall or hang on hooks; check folded size against the space you have.
- Power: sawhorses need no power, but plan cord hooks or a shelf for the tools that do.
- Before the job: check leg latches, anti-slip feet and any clamps, and confirm the stated pair capacity covers the load.
- Uneven floors: anti-slip feet and adjustable legs help on gravel or irregular floors, as the EHHLY listing states.
FAQ: garage tools
How does a sawhorse work?
A sawhorse is a trestle that holds lumber or panels at working height. Set a pair apart, rest the workpiece across both tops, and cut or assemble between them. The pair shares the load, so check the stated pair capacity before loading heavy boards.
How do you use sawhorse clamps?
Bar clamps on the ZYJOYY pair fasten a workpiece in vertical or horizontal positions, and the clamps detach for use on another workspace. Bench dogs on the same pair hold the workpiece in place for cutting and assembly. Keep the clamp faces clear of sawdust so they grip firmly.
How do you use a sawhorse table?
Connect multiple sawhorses with boards in the pre-drilled 2×4 brackets to form a portable workbench, as both BORA listings describe. Keep the brackets aligned and the legs latched before loading the bench.
How much are plastic sawhorses?
The listings compared here state no prices, so judge a plastic pair by its stated figures instead: the EHHLY pair states a 2500-lb total with a PP plastic body and powder-coated steel legs. Compare that capacity and frame against metal pairs before choosing.
How much are metal sawhorses?
The listings compared here state no prices. Judge a metal pair by capacity and adjustment: the BORA pairs state 2700 lbs for the pair, while the WORKESS pair states 880 lbs with 7 levels of height adjustment. Capacity and frame tell you more than material alone.
Related: the best heavy duty tool cart with wheels, the best workbench with storage drawers and our tool storage hub. Also see our best tool organizer with wheels, bar clamp vs c clamp and best shop press for auto shop.
