Bumper Clip Repair Kit: Fixing Broken Bumper Clips
A bumper clip repair kit replaces broken push-type bumper and trim fasteners with a matched set of clips and a remover, so a loose bumper cover can be refastened without a trip to the parts store.
On this page
A bumper cover hangs loose after a parking lot knock, and the cause is usually a handful of snapped plastic clips, not the bumper itself. A bumper clip repair kit is a box of push-type plastic retainers in the sizes cars use for bumpers, fenders, door trim and splash shields, plus a remover tool to pull the broken ones out. Match the clip size to the hole, push the new clip in, and the cover sits tight again.
As an Amazon Associate I earn from qualifying purchases. GarageToolHQ earns a commission when you buy through links on our product pages, at no extra cost to you. Read our affiliate disclosure.
Below: what breaks, how to match a clip to the hole, and the kits that cover the job.
GOOACC 240PCS Bumper Retainer Clips Car Plastic
A 240-piece push retainer kit in 12 popular sizes with 5 fastener removers and a 2-year warranty, for door trim, fender, bumper and splash shield clips on GM, Ford, Toyota, Honda and Chrysler.
Pros
- 240-piece set in 12 popular sizes
- 5 fastener removers included
- 2-year warranty stated
- Storage box with 12 compartments
Cons
- Listing carries an unrelated note about earbud tips
- Smaller count than the largest kit here
- No per-size piece count stated
- No safety certification stated
1365Pcs Car Push Retainer Clips Body Clips Plastic
A 1365-piece nylon push retainer kit in 44 popular sizes for trim, door panel, bumper, fender, engine cover and splash shield clips on Toyota, GM, Ford, Honda, Acura and Chrysler.
Pros
- 1365-piece set in 44 popular sizes
- Nylon build, strong and vibration resistant
- Fits Toyota, GM, Ford, Honda, Acura and Chrysler
- Storage box included for carrying and organizing
Cons
- Part number names red while the listing says blue
- No warranty term stated
- No safety certification stated
- Tallest box here at 6.69 x 6.77 x 8.0 in
240PCS Car Bumper Retainer Clips Kit
A 240-piece push retainer kit in 12 popular sizes with 5 fastener removers, in high-grade plastic, for door trim, panel and fender clips on GM, Ford, Toyota, Honda and Chrysler.
Pros
- 240-piece set in 12 popular sizes
- 5 fastener removers included
- High-grade plastic, wear, corrosion and heat resistant
- Labeled compartments in a compact plastic box
Cons
- No warranty term stated
- No safety certification stated
- Smaller count than the largest kit here
- No per-size piece count stated
Hrwfnty 120PCS Car Clips Kit, 6 Popular Sizes
A 120-piece push-in clip kit in 6 popular sizes with a removal tool, in premium plastic, for bumper, fender and door trim panel clips on most vehicles.
Pros
- 120-piece set in 6 popular sizes
- Removal tool included
- Premium plastic, wear-resistant and sturdy
- Labels show the quantity and size of each clip type
Cons
- Smallest kit here
- 6 sizes only, the narrowest range here
- No warranty term stated
- No safety certification stated
What a bumper clip repair kit fixes
Push retainers hold trim and covers to the body: the bumper cover to the fender, the splash shield to the frame, the door trim to the door. They snap when a bumper flexes, when a shield catches a curb, or when a trim panel comes off for other work and the old clip stays in the hole. A kit replaces the broken clip with one of the same size, so the panel sits flush again.
The kits here cover the usual jobs. GOOACC and JinnEterri hold 240-piece sets in 12 popular sizes, JNLK holds a 1365-piece set in 44 sizes, and Hrwfnty holds a 120-piece set in 6 sizes. Every kit comes in a storage box, and each listing names a remover tool for pulling old clips.
| Kit | Pieces | Sizes | Removers |
|---|---|---|---|
| GOOACC 240-Piece Kit | 240-piece | 12 | 5 |
| JinnEterri Clips Kit | 240-piece | 12 | 5 |
| JNLK 1365-Piece Kit | 1365-piece | 44 | Not stated |
| Hrwfnty 120-Piece Kit | 120-piece | 6 | 1 |
How to use a bumper clip repair kit
- Find the broken clip. Look for the hole where the cover stands off the body, and pull the broken clip out with the remover.
- Match the size. Hold the old clip beside the new ones and pick the same head size and stem length. The kits here carry 12, 44 and 6 popular sizes, so the match is usually in the box.
- Push the new clip in. Line the clip up with the hole, press it home by hand, and check that the head sits flush.
- Check the panel. Press the cover along its edge and look for gaps. A clip that will not seat may be the wrong size, so check the hole and try the next size in the box.
Push retainers hold covers and trim in place. A cracked bumper, a bent bracket or a torn mounting tab needs a proper repair, not a bigger clip.
Use rated jack stands on solid ground, wear eye protection with power and air tools, keep fuel-burning equipment out of a closed garage, and follow the manual for every tool. Read our Safety Disclaimer.
Bumper clip repair kits for the job
Each kit below handles one part of the job: the clips refasten the cover, the remover pulls the broken ones, and the box keeps the sizes sorted for the next repair. The cards carry the scores and the details.
These are scored on the Shop Score, which weighs performance, build, value, safety where it applies, and warranty. No safety listing is stated for any kit here, so no kit earns safety points.
What to check before you buy
- Count the sizes, not just the pieces. A 1365-piece kit in 44 sizes holds more sizes than a 240-piece kit in 12 sizes, even though both hold plenty of clips.
- Check the remover. GOOACC and JinnEterri list 5 removers each, Hrwfnty lists 1 removal tool, and JNLK names a tough remover with no count stated.
- Check the box. GOOACC’s box has 12 compartments, JinnEterri’s has labeled compartments, and Hrwfnty’s labels show the quantity and size of each clip type.
- Check the warranty. Only GOOACC states a warranty term, 2 years. The other kits state no term.
FAQ: garage tools
How do I know which clip size my bumper needs?
Pull the broken clip and match it. Hold it beside the new clips and pick the same head size and stem length, then push the new clip into the hole and check that the head sits flush. The kits here carry 12, 44 and 6 popular sizes, so the match is usually in the box.
Can I reuse a bumper clip after removing it?
Usually not. Push retainers are made to snap in and stay put, and removal can wear or break the barbs, so a clip that comes out loose may not hold the cover tight. Use a fresh clip from the kit and keep the spares in the box for the next job.
What is the difference between the 240-piece and 1365-piece kits?
Size range and count. The 240-piece kits hold 12 popular sizes, while the 1365-piece kit holds 44 sizes, so the bigger kit holds more sizes and more clip types. A 120-piece kit in 6 sizes holds fewer sizes, so check that the sizes you need are among the 6 before you buy.
Do I need a fastener remover, or can I pull clips by hand?
A remover helps. The kits here include removers: GOOACC and JinnEterri list 5 each, Hrwfnty lists 1 removal tool, and JNLK names a tough remover. Pulling a clip by hand can snap the head and leave the stem in the hole, so use the remover and pry gently.
Will these clips fit my car?
Check the listing’s fit list against your car. The kits here name GM, Ford, Toyota, Honda, Chrysler and Acura, with 12, 44 and 6 popular sizes between them. Match the old clip’s size first, since the brand list alone does not prove the fit.
Related: the bumper repair kit guide, plastic welder for bumper repair, trim removal tools for dashboards and the garage upgrades hub.
