Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Cordless Drill Repair: Common Fixes and Replacement Parts

Cordless drill repair for a worn chuck: match the replacement by part number, clamping capacity and mount thread, with two Milwaukee chuck options compared.

Cordless Drill Repair: Common Fixes and Replacement Parts
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 142-66-1006 42-66-2706 Replace for Milwaukee42-66-1006 42-66-2706 Replace for Milwaukee9.6/10View on Amazon
  2. 242-66-2608 Replaces for Milwaukee 42-66-002342-66-2608 Replaces for Milwaukee 42-66-00239.5/10View on Amazon

Cordless drill repair can come down to the part that grips the bit. When a drill still runs but the chuck slips, wobbles or refuses to hold a bit straight, a chuck swap matched to the drill is the repair to check first, not a new drill. The gear below covers that swap step for Milwaukee drill drivers, with the part numbers and fit details that decide the match.

GarageToolHQ earns a commission when you buy through links on our product pages, at no extra cost to you. Read our affiliate disclosure.

42-66-1006 42-66-2706 Replace for Milwaukee

42-66-1006 42-66-2706 Replace for Milwaukee

LIKINMAKA9.6/10 Shop Score
i
The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A keyless replacement chuck for Milwaukee drill drivers, handling the chuck swap step when jaws wear or the chuck slips.

Pros

  • Clamping capacity stated as 1/16 inch to 1/2 inch
  • Mount thread stated as 9/16 inch-18 for matching
  • Chuck screw included as stated by the maker
  • Metal radial lock design stated by the maker

Cons

  • Fits only the Milwaukee models the maker lists
  • Thread size must match the drill spindle exactly
  • No warranty term is stated
  • Screw fit must be checked before ordering
42-66-2608 Replaces for Milwaukee 42-66-0023

42-66-2608 Replaces for Milwaukee 42-66-0023

LIKINMAKA9.5/10 Shop Score
i
The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A keyless chuck assembly for Milwaukee drill drivers, handling the chuck swap step when the original chuck wears out.

Pros

  • Keyless chuck size stated as 1/2 inch
  • Replaces six obsolete part numbers as stated
  • Fit covers many Milwaukee drill driver models
  • Assembly format suits a full chuck swap

Cons

  • Fits only the Milwaukee models the maker lists
  • Mount thread size is not stated in numbers
  • No warranty term is stated
  • Model fit must be checked before ordering

Cordless drill repair: start with the symptom

Match the repair to what the drill does. A chuck that slips on the bit, jaws that close unevenly, or a chuck that will not tighten points to the chuck itself. A drill that will not run at all points elsewhere, toward the battery, the trigger or the motor, and a chuck swap will not fix those faults. This guide covers the chuck repair that the parts below support, since both featured parts are replacement chucks for Milwaukee drill drivers. Work with the battery removed from the drill, and keep the old chuck until the replacement is fitted and checked.

Match the replacement chuck before you order

Fit decides this repair. Check the drill model, the chuck part number, the clamping capacity and the mount thread against the replacement before ordering. The LIKINMAKA 42-66-1006 states clamping capacity from 1/16 inch to 1/2 inch with a 9/16 inch-18 mount and an included chuck screw, replacing Milwaukee part numbers 42-66-2706, 42-66-2707 and 42-66-8003. The LIKINMAKA 42-66-2608 states a 1/2 inch keyless chuck size replacing part numbers 42-66-2606, 42-66-2701, 42-66-2707, 42-66-2702, 42-66-2608 and 42-66-0023, with no mount thread size stated in numbers. Where a thread size is stated, match it exactly. Where only model fit is stated, match the model exactly.

Gear for the chuck swap

Both parts below handle the same step, replacing the chuck assembly on a Milwaukee drill driver whose model matches the stated fit.

How the swap goes

Remove the battery first. Open the old chuck fully, remove the chuck screw from inside the chuck where one is fitted, then unscrew the chuck from the spindle. Fit the replacement chuck onto the spindle, refit the chuck screw where the drill uses one, and check that the jaws close evenly on a bit before the battery goes back on. The 42-66-1006 includes a chuck screw as stated by the maker, which covers that screw step for drills that use it. If the replacement will not thread on smoothly, stop and recheck the mount size and model fit rather than forcing the part.

Garage safety

Read the manual before first use, wear eye protection, keep the work area clear and ventilated, and stay within every stated rating. Read our Safety Disclaimer.

FAQ: garage tools

How do I know if my cordless drill needs a new chuck?

A chuck that slips on the bit, closes unevenly or will not tighten points to the chuck. A drill that will not run at all points to the battery, trigger or motor instead, and a chuck swap will not fix those faults.

What do I check before ordering a replacement chuck?

Check the drill model, the chuck part number, the clamping capacity and the mount thread. The 42-66-1006 states 1/16 inch to 1/2 inch capacity with a 9/16 inch-18 mount, while the 42-66-2608 states a 1/2 inch keyless size by model fit.

Does a replacement chuck include the chuck screw?

The 42-66-1006 includes a chuck screw as stated by the maker. No included screw is stated for the 42-66-2608, so keep the original screw until the replacement chuck is fitted and checked.

Will a Milwaukee replacement chuck fit other drill brands?

Both parts here state fit for Milwaukee models only. Match your drill model against the stated fit list for each part, and choose a part made for your brand if your drill is not listed.

Related: cordless tools, cordless drill vs hammer drill and drills and drivers.

More buying guides