Best Heavy Duty Car Dolly for Large Wheels (2026): 4 Sets Compared

Compared on paper

Specifications are manufacturer rated, as published on each listing and collected 5 November 2026. Where a listing contradicts itself, both figures are shown in the review.

How the points were given

The Shop Score weighs performance, build, value, safety and warranty, with the weights published on our How We Pick page. For a car dolly, safety means locking brakes, antiskid plates, V-groove tracks and side rails the listing actually states; a set that states none of those scores low on that line, whatever its capacity. Only one of the four picks states a warranty term, so only one scores on that line.

Scores run from 9.2 to 9.8: each product’s point total is placed on that range, so more points always means a higher score.

What the listings tell you

All four picks are 4-pack sets. Three state 6,000 lb for the set and one states 10,000 lb. Two state a caster size, 3.5 in on the GarveeTech set and 3 in on the IDEALHOUSE set, while the other two leave caster size unstated. Only one states a warranty term, the 12-month term on the TUFFIOM set. Two listings contradict themselves on a figure: the Jojoka bullets read as if each dolly holds 6,000 lb, and the IDEALHOUSE bullets give two per-dolly figures.

How to choose the best heavy duty car dolly for large wheels

Set capacity first

Set capacity is the number that decides whether a set suits your car. Three sets state 6,000 lb for the set with 1,500 lb per dolly, and the GarveeTech set states 10,000 lb for the set with 2,500 lb per dolly. Match the set figure to your vehicle, not the per-dolly figure, since all four wheels share the load. A truck or RV needs the larger set figure, and the TUFFIOM listing names pickup trucks, vans and RVs as the vehicles its set moves around a garage or shop.

Casters and locks

Caster size and locks decide how the set rolls and where it stops. The GarveeTech set has four 3.5 in steel casters with ball bearings on each dolly, and the IDEALHOUSE set has 3 in rolling bearing casters with locking mechanisms and a foot brake. The Jojoka set has swivel casters with built-in locking brakes that hold each dolly in place on a sloped or uneven floor, and the TUFFIOM set has smooth-rolling swivel casters with no size stated. A locking brake matters most on a floor that is not level, so check the lock before you check the caster size.

Platform size and wheel fit

Large wheels need a platform that fits the tire, not just a capacity that covers the weight. The GarveeTech platform measures 23.8 by 14.4 in in the bullets, the widest platform in this group, with a curved profile and side rails that keep the tire from slipping. The TUFFIOM set uses a V-groove track that locks the wheel in place, and the IDEALHOUSE set uses an antiskid plate in a dense diamond pattern for grip on the tire. The Jojoka set uses a low-profile steel platform. Measure your tire width against the platform before ordering, since a tire wider than the platform will not sit flat. Our wheel dolly vs car dolly guide explains how the two kinds differ.

Using them in the garage

The GarveeTech listing describes the job: lift the tire with a jack, place the dolly underneath, repeat for each tire, and the job takes about 10 minutes. Never get under a vehicle on a jack alone; use rated stands on solid level ground, and follow the lift points in the owner’s manual. A floor jack for home garage lifts the tire, the dollies carry it, and the stands hold the car while you work under it.

Garage Fit Check

• Measure the floor space first: the GarveeTech platform measures 23.8 by 14.4 in in the bullets, and the TUFFIOM set measures 15.7 by 11.4 in, so four dollies need a clear patch of floor for each wheel.
• Check the set capacity against your vehicle: three sets state 6,000 lb and one states 10,000 lb.
• Check the weight before you carry the set: 42.33 lb for the TUFFIOM set and 84.99 lb for the GarveeTech set.
• Check the floor: the Jojoka casters roll across concrete, asphalt and shop floors, and the locking brakes hold on a sloped or uneven floor.
• Never get under a vehicle on a jack alone; use rated stands on solid level ground.

FAQ: garage tools

How does a car dolly work?

Each dolly slides under one tire, and its casters let you roll the car sideways or spin it in place. Four dollies, one per wheel, let you reposition a whole car in a tight garage without starting it.

How do you put a car on dollies?

Lift one tire with a jack, place a dolly underneath, and repeat for each tire. The GarveeTech listing says the job takes about 10 minutes, and the TUFFIOM listing says its dollies need only quick assembly before use.

Can a car dolly move a truck?

These dollies move a vehicle around a garage or shop, not down the road. The TUFFIOM listing names pickup trucks, vans and RVs, and the GarveeTech set states a 10,000 lb set capacity, so check the set figure against your truck before ordering.

How do you set up a car dolly?

Set each dolly by its wheel, lock the casters once the car sits on them, and release the locks to roll. The Jojoka locking brakes hold each dolly in place once positioned, and the IDEALHOUSE foot brake locks the casters during maintenance.

Related: the best floor jack for home garage, the best jack stands for home garage, our engine and shop equipment hub and our jacks and stands hub. Also see our wheel dolly vs car dolly. Also see our best car lift for home garage. Also see our best low profile floor jack. Also see our best dolly with 4 wheels. Also see our best single wheel dolly. Also see our best adjustable height jack stands.