Best Drill Bit to Drill Hardened Steel (2026)
5 cobalt drill bits and sets for hardened steel, compared by alloy, cobalt content, point, size range and coating.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallOSTTE TiAlN 3/4 in9.7/10View on Amazon - 2
Best SetGMTOOLS 15-Piece Set9.7/10View on Amazon - 3
Best 3-PackNarwhal Cobalt 3-Pack9.6/10View on Amazon - 4
Best Small BitBosch M42 Cobalt 1/89.6/10View on Amazon
A snapped bolt in a brake bracket, a rusted hinge screw, a bracket hole that has to move a fraction: hardened steel shows up in small garage jobs, and a plain bit skates across it instead of cutting. The best drill bit to drill hardened steel is a cobalt bit with a split point that starts without skating, an alloy that holds an edge under heat, and a shank that grips in the chuck. This guide compares five cobalt bits and sets by alloy, cobalt content, point, size and coating, so the pick matches the steel in front of you.
GarageToolHQ earns a commission when you buy through links on this page, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall OSTTE TiAlN 3/4 in: 3/4 in M35 cobalt bit with TiAlN coating, 89 HRC surface hardness and a 135° split point. Check price on Amazon
- Best Set GMTOOLS 15-Piece Set: 15-piece M35 set from 1/16 in to 3/8 in, 5% cobalt, 135° split point and a 30-day money back term. Check price on Amazon
- Best 3-Pack Narwhal Cobalt 3-Pack: 3-pack of 3/4 in M35 cobalt bits for steel up to 40 HRC, with a 135° split point and a storage case. Check price on Amazon
- Best Small Bit Bosch M42 Cobalt 1/8: 1/8 in M42 cobalt bit with 8% cobalt, a three-flat shank and a split point for easy starts. Check price on Amazon
Picks for the garage

3/4 Inch Industrial Grade M35 Cobalt Drill Bit
A 3/4 in M35 cobalt bit with a TiAlN coating, 89 HRC surface hardness, a 135° split point and a 3-flat 1/2 in shank.
Pros
- TiAlN coating with 89 HRC surface hardness stated
- M35 cobalt steel with 5% cobalt for heat resistance
- 135° split point centers itself and penetrates with less pressure
- 3-flat 1/2 in shank grips tighter than a round shank
Cons
- Single bit at one size, so no range without a set
- 3/4 in size suits large holes only, not small pilot holes
- 6 in total length with a 3 in flute limits depth on thick stock
- 1/2 in shank needs a 1/2 in chuck, not a smaller one

GMTOOLS 15Pcs Cobalt Drill Bit Set, M35 HSS
A 15-piece M35 cobalt set from 1/16 in to 3/8 in, with 5% cobalt, a 135° split point, gold oxide finish and an indexed storage case.
Pros
- 15 sizes from 1/16 in to 3/8 in in one set
- M35 steel with 5% cobalt for heat, wear and chip resistance
- 135° split point centers itself and clears chips fast
- Indexed storage case keeps the set organized
Cons
- Largest size is 3/8 in, so no large holes without a bigger bit
- Round straight shanks grip less than a three-flat shank in hard material
- No HRC figure is stated for the steel it can drill
- Plastic storage case rather than a metal one

Narwhal 3/4" Drill Bit (3 Pack - 1/2 Inch Shank)
A 3-pack of 3/4 in M35 cobalt bits with a 135° split point, a 1/2 in shank and a 6 in total length, for steel up to 40 HRC.
Pros
- 3-pack of 3/4 in bits for repeated holes in hard material
- M35 cobalt with 5% cobalt, fully ground, for hardened and stainless steel
- 135° split point makes repeated holes easier in harder materials
- Plastic storage case included for neat storage
Cons
- 3/4 in size suits large holes only
- 1/2 in shank needs a 1/2 in chuck
- No warranty term is stated
- 3 bits at one size, so no range without a set

BOSCH CO2135B 1-Piece 1/8 In. x 2-3/4 In. Cobalt
A single 1/8 in x 2-3/4 in M42 cobalt bit with 8% cobalt, a three-flat shank and a split point for stainless steel, cast iron and titanium.
Pros
- M42 alloy with 8% cobalt, the highest cobalt content here
- Split point allows easy starts with no skating, with no need for a center punch
- Surface-hardened tip penetrates tough abrasive materials
- Thick web-helix design adds stability in tough applications
Cons
- Single 1/8 in bit, so one size only
- No warranty term is stated
- Small bit suits light-gauge metal and pilot holes, not large holes
- 2-3/4 in length limits depth on thick stock

DEWALT Cobalt Alloy Steel Drill Bit Set with Pilot
A 14-piece cobalt alloy steel drill bit set with a pilot point, in a connectable storage system with a clear lid and clip latch.
Pros
- 14 pieces in one set for wood, metal or I-beams
- Pilot point for easy starts
- Connectable storage system with a clear lid and clip latch
- Bit-bar design allows easy removal and custom placement
Cons
- No sizes are stated for the bits in the set
- No cobalt content is stated, so the grade is unknown
- No point angle is stated
- ToughCase+ storage is sold separately
Other tools worth a look
NEIKO 10047A Extra Long Drill Bit SetCheck price on Amazon
EZARC M35 Cobalt Stubby Drill Bit Set for Hard MetalCheck price on Amazon
HIDOTOL 13 PCS Cobalt Drill Bit Set M35 HSS Twist Drill BitsCheck price on Amazon
NordWolf 5-Piece M35 Cobalt Stubby Drill Bit SetCheck price on Amazon
Crosstar 21Pcs M35 Cobalt Drill Bit SetCheck price on Amazon
Compared on paper
| Model | Shop Score | Material | Size | Point | Shank | Pieces | Warranty |
|---|---|---|---|---|---|---|---|
| OSTTE TiAlN 3/4 in | 9.7/10 | M35, 5% cobalt, TiAlN | 3/4 in | 135° | 3-flat 1/2 in | 1 | 90-day satisfaction term |
| GMTOOLS 15-Piece Set | 9.7/10 | M35 HSS, 5% cobalt | 1/16-3/8 in | 135° | Round straight | 15 | 30-day money back |
| Narwhal Cobalt 3-Pack | 9.6/10 | M35, 5% cobalt | 3/4 in | 135° | 1/2 in | 3 | Not stated |
| Bosch M42 Cobalt 1/8 | 9.6/10 | M42, 8% cobalt | 1/8 in | Split point | Three-flat | 1 | Defects only |
| DEWALT Cobalt Set 14 | 9.4/10 | Cobalt alloy steel | Not stated | Pilot point | Not stated | 14 | Not stated |
*Surface hardness is the figure the maker states for the coating or the steel the bit can drill. Every rating comes from the brand’s listing and is not a shop test (gathered 15 November 2026).
How the picks were scored
Each bit is scored on performance, build, value, safety and warranty. Performance weighs alloy, cobalt content, point and size range. Build weighs grinding, coating, shank and storage. Value weighs what the listing delivers for the class. Safety weighs a stated safety feature; no safety feature is stated for these bits, so no safety points are given. Warranty weighs a stated term. The weights follow the method the site publishes for scoring.
| Product | Shop Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| OSTTE TiAlN 3/4 in | 9.7 | 33 | 22 | 20 | n/a | 2 |
| GMTOOLS 15-Piece Set | 9.7 | 28 | 21 | 22 | n/a | 2 |
| Narwhal Cobalt 3-Pack | 9.6 | 30 | 21 | 21 | n/a | 0 |
| Bosch M42 Cobalt 1/8 | 9.6 | 29 | 22 | 18 | n/a | 0 |
| DEWALT Cobalt Set 14 | 9.4 | 23 | 19 | 20 | n/a | 0 |
No score drops under 9.2 or climbs past 9.8; a tool’s place inside those bounds is set by its weighted point total. Safety is scored for corded, cordless and air tools and for listings that state safety features; hand tools without either are scored on 90 points.
What the listings tell you
5 cobalt drill bit listings were read for this guide. 4 stated M35 or M42 cobalt steel, and 1 stated cobalt alloy steel without a grade. 3 stated a 135° split point, 3 stated a storage case, and 1 stated a money back term. Sizes ran from 1/16 in to 3/4 in, and 2 stated a surface hardness figure.
Buying guide: the best drill bit to drill hardened steel
Cobalt content and alloy
M35 cobalt steel with 5% cobalt and M42 cobalt steel with 8% cobalt are the alloys here. A higher cobalt content suits harder steel, and a stated grade beats an unstated one. A bit that states only cobalt alloy steel, with no grade and no cobalt content, leaves the buyer guessing.
Point angle
A 135° split point starts without skating and clears chips, and the listings here that state a point state 135°. A pilot point centers the bit at the start of the hole. A bit with no stated point angle needs a center punch to start true.
Size and shank
A 3/4 in bit with a 1/2 in shank fits a 1/2 in chuck, while a 1/8 in bit fits a small drill. A three-flat shank grips tighter than a round shank in hard material. A set from 1/16 in to 3/8 in covers small holes, while a single 3/4 in bit covers one large size.
Coating
A TiAlN coating raises surface hardness, and the coated bit here states 89 HRC. An uncoated cobalt bit still cuts hardened steel when the alloy and point are right. A gold oxide finish is a surface finish, not a cutting edge.
Read the manual before first use, wear eye protection, keep the work area clear and ventilated, and stay within every stated rating. Read our Safety Disclaimer.
Garage Fit Check
- Match the shank to the chuck: a 1/2 in shank needs a 1/2 in chuck, and a 3/4 in bit needs room to turn.
- Keep the bits in the storage case or box so the points stay sharp and the set stays complete.
- Check the size range before the first job: a set from 1/16 in to 3/8 in covers small holes, while a 3/4 in bit covers one large size.
- Use cutting fluid and a slow speed on hardened steel, and let the bit cool between holes.
FAQ: garage tools
What drill bit is best for hardened steel?
A cobalt bit: M35 with 5% cobalt or M42 with 8% cobalt, with a 135° split point. The bits here that state a grade state M35 or M42.
Can a cobalt drill bit drill hardened steel?
Yes, when the alloy and point suit the job: the M35 bits here state use on hardened steel, and one states steel up to 40 HRC.
What is the best drill bit angle for hardened steel?
135°: the split point bits here state a 135° point that centers itself and clears chips. A pilot point also centers the bit at the start.
Do I need a drill press for hardened steel?
A drill press holds the bit straight and steady, and the coated bit here states use with drill drivers and drill presses. A hand drill works when the bit is centered and the speed stays slow.
Related: the best drill bit for steel, the best drill bits for stainless steel, the best drill bit set, the best drill bit for drilling metal, the best drill press for metal work, the benchtop vs floor drill press, the best hex shank drill bit set and the engine and shop equipment hub.




