Types of Rivet Guns for Auto and Shop Work (2026)
Hand, lever, lazy-tong, pneumatic and cordless rivet guns compared, with four home garage kits and the nosepiece sizes they cover.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
OMT Rivet Gun Kit with 200 Rivets9.7/10View on Amazon - 2
Hand Rivet Gun Kit with 100 Blind Rivets9.6/10View on Amazon - 3
Pop Rivet Gun Tool Kit with 100 Pcs Blind Rivets9.6/10View on Amazon - 4
Kerry 9.6" Pop Rivet Gun Kit9.6/10View on Amazon
A fender patch that needs fastening where the back of the panel stays out of reach is a job for a blind rivet, and the types of rivet guns all set the same kind of rivet with a different squeeze. A hand riveter pulls the mandrel with grip strength, a lever tool multiplies that grip, and an air or battery tool does the pulling for you. The sections below name each type, say when it fits, and show the hand tools for most home garage work.
GarageToolHQ earns a commission when you buy through links on our product pages, at no extra cost to you. Read our affiliate disclosure.
Below: the types and the hand tools for most garage jobs.

OMT Rivet Gun Kit with 200 Rivets
A hand rivet gun kit with 200 aluminum rivets, 4 drill bits, 4 nosepieces and a storage case.
Pros
- 200 aluminum rivets in 4 sizes, 3/32 to 3/16 in
- 4 drill bits, 2.5, 3.5, 4.2 and 5 mm, included
- 35CrMo alloy steel jaws grip stems firmly
- HD-PE storage case keeps the kit together
Cons
- 8-inch single-hand size gives less leverage than the 9.6-inch Kerry handle
- Included rivets are aluminum only
- No jam-removal nozzle is included
- 1-year warranty, shorter than the 2-year HOLAPUZZLE warranty

Hand Rivet Gun Kit with 100 Blind Rivets
A one-hand rivet gun with a 90-degree right-angle head, 4 nosepieces and 100 blind rivets.
Pros
- 90-degree right-angle head fits tight spots
- 4 interchangeable nosepieces, 3/32 to 3/16 in, stored on the handle
- Handles aluminum, steel and stainless steel rivets
- 2-year manufacturer warranty stated
Cons
- 100 rivets, half the count of the 200-rivet kits
- No drill bits are included
- One-hand design gives less leverage than the extended-handle Kerry
- No jam-removal nozzle is included

Pop Rivet Gun Tool Kit with 100 Pcs Blind Rivets
A hand riveter with 100 aluminum rivets, 4 nosepieces, a 0.5 to 3 mm grip range and a handle lock.
Pros
- Grip range of 0.5 to 3 mm stated, 0.02 to 0.12 in
- Handle lock for storage
- Wrench and manual included
- 1-year warranty stated
Cons
- Aluminum-body rivets only, not intended for stainless steel rivets
- 100 rivets, half the count of the 200-rivet kits
- No drill bits are included
- No extended handle for extra leverage

Kerry 9.6" Pop Rivet Gun Kit
A 9.6-inch extended-handle rivet gun with 200 aluminum rivets, 4 tool-free nosepieces and a jam-removal nozzle.
Pros
- Extended 9.6-inch handle, stated to give 70% more leverage
- 200 aluminum rivets, 50 of each size
- Jam-removal nozzle included for stuck rivets
- Tool-free nosepiece changes in seconds
Cons
- No warranty term is stated
- No drill bits are included
- No storage case is included
- The listing recommends a washer under the rivet head on plastic panels to stop cracking
Types of rivet guns: how each one sets a rivet
Every rivet gun does the same job at the nose: it pulls the mandrel through a blind rivet until the rivet body swells and the stem snaps off.
| Type | How it pulls | Best for |
|---|---|---|
| Hand riveter | Squeeze the handles by hand | Occasional garage jobs |
| Lever riveter | Long handles multiply grip strength | Long runs of fasteners |
| Lazy-tong riveter | Squeezing the handles extends the scissor arms | Awkward spots |
| Pneumatic riveter | Shop air pulls the mandrel | High-volume shop work |
| Cordless riveter | A battery motor pulls the mandrel | Jobs away from an air line |
Match the tool to the rivet: the nosepiece must fit the rivet size, and the grip range must cover the sheets being joined. See how to use a rivet gun for the steps once the tool is in hand.
How to pick the right type
Start with the rivet size. All four kits here cover 3/32, 1/8, 5/32 and 3/16 inch rivets with four interchangeable nosepieces. A 9.6-inch extended handle, like the Kerry, gives more leverage for setting a rivet, while a 90-degree right-angle head, like the HOLAPUZZLE, fits behind dashboards and under fenders.
Check the material next. The HOLAPUZZLE handles aluminum, steel and stainless steel rivets, while the OSTAGAR works with aluminum-body rivets only. On plastic panels, the Kerry listing recommends a washer under the rivet head, or the panel may crack.
Count what comes in the box. The OMT and Kerry kits include 200 rivets, while the HOLAPUZZLE and OSTAGAR kits include 100. Only the OMT kit includes drill bits, in 2.5, 3.5, 4.2 and 5 mm, and only the Kerry kit includes a jam-removal nozzle. See the best blind rivets.
Hand rivet guns for the home garage
The four hand tools below cover the sizing and kit part of the job: matching nosepieces, rivets in the box, and a handle that fits the space.
Read the manual before first use, wear eye protection, keep the work area clear and ventilated, and stay within every stated rating. Read our Safety Disclaimer.
FAQ: garage tools
What size rivets does a hand rivet gun use?
All four kits here cover 3/32, 1/8, 5/32 and 3/16 inch rivets with four interchangeable nosepieces.
Can a hand rivet gun set stainless steel rivets?
It depends on the tool. The HOLAPUZZLE handles aluminum, steel and stainless steel rivets, while the OSTAGAR works with aluminum-body rivets only.
How many rivets come with a rivet gun kit?
The OMT and Kerry kits include 200 rivets, while the HOLAPUZZLE and OSTAGAR kits include 100, 25 of each size.
What is the grip range of the OSTAGAR kit’s rivets?
The OSTAGAR kit states a grip range of 0.5 to 3 mm, or 0.02 to 0.12 in, for its included rivets.
Related: electric vs pneumatic rivet gun, the best pneumatic rivet gun, our best rivet gun for beginners and the blind rivet vs closed end rivet guide. Also see our engine and shop equipment hub.




