Best Drill Bit to Drill Through Steel (2026): 5 Picks Compared
Five drill bits for steel compared on cobalt content, coating, point angle and size range, with every figure taken from the listings.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallYellow Paw 1/4in Cobalt9.7/10View on Amazon - 2
Best Metric SetMACXCOIP 13-Pc Cobalt Set9.6/10View on Amazon - 3
Best Step Bit SetCOMOWARE 5-Pc Step Bit Set9.6/10View on Amazon - 4
Best Single Step BitIRONANT Step Bit 1/4-1-3/89.5/10View on Amazon - 5
Sheet Metal PickAnfrere 10-Size Step Bit9.5/10View on Amazon
A bracket needs a hole through a steel plate, and the bit on the bench skates across the surface instead of biting. The best drill bit to drill through steel starts true, holds its edge and clears chips without wandering off the mark. This roundup compares bits by the figures the makers state: cobalt content, coating, point angle, size range and what each bit is made to cut.
GarageToolHQ earns a commission when you buy through links on this page, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall Yellow Paw 1/4in Cobalt: M35 cobalt, TiAlN coating and a 135-degree split point for hardened steel up to 40 HRC Check price on Amazon
- Best Metric Set MACXCOIP 13-Pc Cobalt Set: 13 metric M35 cobalt bits from 1.5 mm to 6.5 mm in a plastic storage box Check price on Amazon
- Best Step Bit Set COMOWARE 5-Pc Step Bit Set: 5 Ti-coated step bits with tri-flatted shanks and an aluminum case Check price on Amazon
- Best Single Step Bit IRONANT Step Bit 1/4-1-3/8: 10 sizes from 1/4 inch to 1-3/8 inch with a 118-degree split point Check price on Amazon
- Sheet Metal Pick Anfrere 10-Size Step Bit: 10 sizes from 1/4 inch to 1-3/8 inch with double flutes for sheet work Check price on Amazon
Picks for the garage

1/4 Inch Cobalt Drill Bit (3 Pack) for Metal
A 3-pack of 1/4-inch M35 cobalt bits with TiAlN coating and a 135-degree split point, stated for hardened steel up to 40 HRC.
Pros
- M35 cobalt with 5% cobalt steel and TiAlN coating stated
- 135-degree split point stated as self-centering
- Stated for hardened steel up to 40 HRC
- 4-inch jobber length with a 2-1/2-inch flute stated
Cons
- Only one size, 1/4 inch, in the pack
- Flute length of 2-1/2 inches limits hole depth in one pass
- No storage case is stated
- No warranty term is stated

MACXCOIP Metric 13Pcs(1.5mm-6.5mm)
A 13-piece metric M35 cobalt set from 1.5 mm to 6.5 mm with a 135-degree point tip and a plastic storage box.
Pros
- 13 metric sizes from 1.5 mm to 6.5 mm stated
- M35 cobalt stated for hardened steel, stainless steel and cast iron
- 135-degree point tip with a twist design stated
- Plastic storage box with size indexes stated
Cons
- Not for quenched bolts
- Metric sizes only, so inch sizes need another set
- 13 pieces cover a narrow range, 1.5 mm to 6.5 mm, so larger holes need another bit
- No certification is stated

COMOWARE Step Drill Bit Set for Metal HSS 5Pcs
A 5-piece Ti-coated HSS step bit set with 2 flutes and tri-flatted shanks, stated for steel sheets, aluminum, wood and plastic.
Pros
- Stated to drill through steel sheets
- Tri-flatted shanks stated for grip under high torque
- 2-flute design stated for faster chip removal
- Aluminum case included
Cons
- Titanium coating, not cobalt, for hard steel
- No point angle is stated
- Made for sheet stock, so thick steel plate is outside its stated use
- No warranty term is stated

IRONANT Spiral Flute 1/4" to 1-3/8" Step Drill Bit
A single HSS step bit with 10 sizes from 1/4 inch to 1-3/8 inch, a 118-degree split point and a titanium coating.
Pros
- 10 sizes in one bit, from 1/4 inch to 1-3/8 inch
- 118-degree split point stated as self-centering
- Spiral dual-flute design stated to clear chips faster
- Titanium coating on high speed steel stated
Cons
- Not recommended for stainless steel or harder metal
- One bit covers the range, so a worn step has no spare
- No certification is stated
- 118-degree point is the bluntest point angle here

Anfrere 10 Sizes Step Drill Bit for Metal Sheet
A single HSS step bit with 10 sizes from 1/4 inch to 1-3/8 inch, a titanium coating and a double-flute design.
Pros
- 10 sizes in one bit, from 1/4 inch to 1-3/8 inch
- Titanium coating on high speed steel stated
- Double-flute design stated for quick chip removal
- Stated for aluminum, copper, plastic and wood board sheet work
Cons
- No point angle is stated
- One bit covers all 10 sizes, with no spare in the box
- Titanium coating, not cobalt, for hard steel
- Suits sheet metal and light jobs, not heavy steel work
Other tools worth a look
NEIKO 10047A Extra Long Drill Bit SetCheck price on Amazon
EZARC M35 Cobalt Stubby Drill Bit Set for Hard MetalCheck price on Amazon
STROTON Cobalt Drill Bit SetCheck price on Amazon
Crosstar 21Pcs M35 Cobalt Drill Bit SetCheck price on Amazon
DEWALT Drill Bit SetCheck price on Amazon
Compared on paper
| Bit | Shop Score | Type | Sizes | Point | Coating |
|---|---|---|---|---|---|
| Yellow Paw 1/4in Cobalt | 9.7/10 | M35 cobalt twist | 1/4 in, 3-pack | 135-degree | TiAlN |
| MACXCOIP 13-Pc Cobalt Set | 9.6/10 | M35 cobalt twist | 1.5-6.5 mm, 13 pcs | 135-degree | Not stated |
| COMOWARE 5-Pc Step Bit Set | 9.6/10 | HSS step | 3/16 to 1-3/8 in, 5 pcs | Not stated | Titanium |
| IRONANT Step Bit 1/4-1-3/8 | 9.5/10 | HSS step | 1/4 to 1-3/8 in, 10 sizes | 118-degree | Titanium |
| Anfrere 10-Size Step Bit | 9.5/10 | HSS step | 1/4 to 1-3/8 in, 10 sizes | Not stated | Titanium |
We copy each listing’s rated specs exactly as the manufacturer gives them; as of 18 November 2026.
How the points were given
Each bit is scored out of 10 on performance, build, value, safety and warranty, with the weights published on the How We Pick page. None of the five listings states a certification or a warranty term, so every pick scores zero on safety and warranty, and the ranking turns on cobalt content, coating, point angle and size range.
| Product | Shop Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Yellow Paw 1/4in Cobalt | 9.7 | 32 | 22 | 21 | n/a | 0 |
| MACXCOIP 13-Pc Cobalt Set | 9.6 | 30 | 21 | 21 | n/a | 0 |
| COMOWARE 5-Pc Step Bit Set | 9.6 | 29 | 21 | 20 | n/a | 0 |
| IRONANT Step Bit 1/4-1-3/8 | 9.5 | 26 | 20 | 20 | n/a | 0 |
| Anfrere 10-Size Step Bit | 9.5 | 24 | 20 | 20 | n/a | 0 |
The displayed number is the weighted point total scaled linearly between 9.2 and 9.8. Earning more points is the only way up. Safety is scored for corded, cordless and air tools and for listings that state safety features; hand tools without either are scored on 90 points.
What the listings tell you
The Yellow Paw bit states M35 cobalt with 5% cobalt steel, a TiAlN coating and a 135-degree split point, and it states hardened steel up to 40 HRC. The MACXCOIP set states M35 cobalt with a 135-degree point tip, in 13 metric sizes from 1.5 mm to 6.5 mm. The three step bits cover 1/4 inch to 1-3/8 inch, with the COMOWARE set adding a 3/16-inch start. Two of the step bits carry limits on steel: the IRONANT bit is not recommended for stainless steel or harder metal, and the Anfrere listing gives conflicting guidance on steel. No listing here states a warranty term or a certification.
Buying guide: the best drill bit to drill through steel
Cobalt for hard steel
M35 cobalt is the material to look for when the steel is hard. The Yellow Paw bit states HSS with 5% cobalt steel and a TiAlN coating, and it states hardened steel up to 40 HRC. The MACXCOIP set states M35 cobalt for hardened steel, stainless steel and cast iron, in 13 metric sizes from 1.5 mm to 6.5 mm. When the job is hardened steel, start with one of the two M35 cobalt picks and match the size to the hole.
Step bits for sheet metal
A step bit drills a range of hole sizes with one piece, which suits sheet metal work. The IRONANT bit and the Anfrere bit each cover 10 sizes from 1/4 inch to 1-3/8 inch, and the COMOWARE set covers 3/16 inch to 1-3/8 inch across 5 bits. Step bits cut thin stock cleanly, but the IRONANT bit is not recommended for stainless steel or harder metal, so read the steel limits before you buy.
Point angle and starting true
The point angle sets how the bit starts. The Yellow Paw and MACXCOIP bits state a 135-degree split point, and the IRONANT bit states a 118-degree split point, each described as self-centering to prevent walking. A split point starts on the mark without a punch, which matters on a slick steel surface. The COMOWARE and Anfrere bits state no point angle, so there is nothing to compare on that line.
Read the steel limits
Every bit here names the metal it suits, and the limits matter as much as the claims. The IRONANT bit is not recommended for stainless steel or harder metal. The Anfrere listing gives conflicting guidance on steel, so check before ordering. The MACXCOIP set is not applicable to quenched bolts. Match the bit to the metal in front of you, and pick the M35 cobalt bits for hardened steel.
Read the manual before first use, wear eye protection, keep the work area clear and ventilated, and stay within every stated rating. Read our Safety Disclaimer.
Garage Fit Check
- Check the shank: the Yellow Paw bit has a 1/4-inch shank stated to fit a drill chuck, and the COMOWARE set has tri-flatted shanks for grip.
- Check the sizes: step bits run 1/4 inch to 1-3/8 inch, and the metric set runs 1.5 mm to 6.5 mm.
- Check storage: the MACXCOIP set comes in a plastic storage box, and the COMOWARE set comes in an aluminum case.
- Check the weight on the shelf: the IRONANT bit is 0.33 lb, the Anfrere bit is 0.31 lb, and the MACXCOIP set is 1.0 lb.
FAQ: garage tools
Can a step drill bit drill through steel?
The COMOWARE set states that it drills through steel sheets. The IRONANT bit is not recommended for stainless steel or harder metal, so step bits here suit sheet metal, not every steel job.
What does M35 cobalt mean on a drill bit?
The Yellow Paw listing states HSS with 5% cobalt steel and a TiAlN coating. M35 cobalt bits are stated for hardened steel, stainless steel and cast iron.
Which bit here drills hardened steel up to 40 HRC?
The Yellow Paw 1/4-inch cobalt bit, which states M35 cobalt with a TiAlN coating and a 135-degree split point for hardened steel up to 40 HRC.
How many sizes does the COMOWARE step bit set cover?
The title states 50 sizes and the bullets state 28 sizes, from 3/16 inch to 1-3/8 inch. Check before ordering.
Do any of these bits state a warranty?
No. None of the five listings states a warranty term or a certification.
Related: the best drill bit for steel, the best drill bits for stainless steel, the engine and shop equipment hub and the best step drill bit. Also see best drill bit to drill hardened steel. Also see best drill bits for metal and steel. Also see hole saw vs step bit for metal. Also see drill bit size guide. Also see types of drill bit. Also see cordless drill vs hammer drill.




