Best Drill Bit to Drill Through Metal (2026): 5 Picks Compared
Five drill bits and sets for drilling through metal, compared by size range, coating, split point and shank, for sheet metal, steel and aluminum.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallOSTTE 5-Piece Step Set9.6/10View on Amazon - 2
Best Single Step BitNEIKO 10184A Step Bit9.6/10View on Amazon - 3
Best 3-Piece SetIRONANT 3-Piece Step Set9.6/10View on Amazon - 4
Best Small SizesAUYAARS 19-Piece Hex Set9.5/10View on Amazon - 5
Best Long ReachNEIKO 10047A Long Bit Set9.5/10View on Amazon
The bracket holes never line up until you drill them yourself, and a dull bit skating across sheet metal is how a Saturday job turns into a scratched panel. The best drill bit to drill through metal starts clean, holds its edge and leaves a round hole with no burr. This guide compares five bits and sets by size range, coating, split point and shank.
GarageToolHQ earns a commission when you buy through links on this page, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall OSTTE 5-Piece Step Set: 50 sizes from 3/16 to 1-3/8 in across 5 titanium-coated HSS step bits in an aluminum case Check price on Amazon
- Best Single Step Bit NEIKO 10184A Step Bit: 9 steps from 1/4 to 3/4 in, 135-degree split point, 2-flute design and tri-flat shank Check price on Amazon
- Best 3-Piece Set IRONANT 3-Piece Step Set: 28 sizes from 1/8 to 3/4 in across 3 titanium-coated HSS step bits with a portable bag Check price on Amazon
- Best Small Sizes AUYAARS 19-Piece Hex Set: 19 pieces from 1/16 to 1/4 in with a 1/4 in hex shank and an indexed case Check price on Amazon
- Best Long Reach NEIKO 10047A Long Bit Set: 5 M2 HSS bits at 12 in long in sizes from 1/8 to 3/8 in Check price on Amazon
Picks for the garage

OSTTE Step Drill Bit Set 5Pcs
A 5-piece step bit set with 50 hole sizes from 3/16 in to 1-3/8 in, titanium-coated high-speed steel, a 118° split point and an aluminum case.
Pros
- 50 hole sizes from 3/16 in to 1-3/8 in across 5 bits
- Titanium-coated HSS resists heat and abrasion
- 118° split point for self-centering starts
- Aluminum case keeps the set organized
Cons
- Five bits to keep track of instead of one
- 1-3/8 in top size is more than thin sheet work needs
- No warranty term is stated
- Case measures 6 by 4.45 by 1.7 in, so it takes a shelf spot

NEIKO 10184A Step Drill Bit
A single 9-step bit covering 1/4 in to 3/4 in, in #4241 high-speed steel with a titanium nitride coating, a 135-degree split point and a 3/8 in tri-flat shank.
Pros
- 9 steps from 1/4 in to 3/4 in on one bit
- 135-degree split point prevents walking
- Two-flute design deburrs holes as it cuts
- 3/8 in tri-flat shank grips 3-jaw chucks with less wobble
Cons
- Only 9 sizes, so odd sizes between steps need another bit
- Single bit means no backup if it dulls
- No warranty term is stated
- Top size of 3/4 in is smaller than the 1-3/8 in OSTTE top size

IRONANT 3PCS HSS Step Drill Bit Set for Metal
A 3-piece step bit set with 28 hole sizes from 1/8 in to 3/4 in, titanium-coated high-speed steel, a 118° split point and a portable bag.
Pros
- 28 sizes from 1/8 in to 3/4 in across 3 bits
- 118° split point with dual-flute design for self-centering
- Titanium-coated HSS for sharpness and durability
- Portable bag included for storage
Cons
- Not recommended for stainless steel or wood
- Three bits to keep track of instead of one
- Smallest size is 1/8 in, above the 1/16 in AUYAARS smallest size
- Swapping bits between sizes slows a multi-hole job

19 Pcs Hex Shank Drill Bit Set, 1/16"-1/4"
A 19-piece twist bit set from 1/16 in to 1/4 in, in 4241 high-speed steel with a titanium coating, a 135° split point and a 1/4 in hex shank.
Pros
- 19 pieces from 1/16 in to 1/4 in, with backups for six sizes
- 135° split point prevents walking without a pilot hole
- 1/4 in hex shank fits quick-change chucks and impact drivers
- Indexed case with clear markings for easy selection
Cons
- Largest size is 1/4 in, so bigger holes need another set
- Twist bits cut one size each, so each hole needs its own
- 19 small pieces to keep track of in the case
- Backup pieces cover only six of thirteen diameters

NEIKO 10047A Extra Long Drill Bit Set | 5-Piece
A 5-piece set of 12-inch long M2 high-speed steel bits in sizes from 1/8 in to 3/8 in, for added length and stability.
Pros
- 12-inch length gives extra reach for deep holes
- M2 high-speed steel for hardness and wear resistance
- Five sizes from 1/8 in to 3/8 in in one set
- Sharp pointed tips puncture tough materials cleanly
Cons
- Only five sizes, all 3/8 in or smaller
- 12-inch bits need room behind the drill for clearance
- Each hole needs its own bit, with no step sizes
- 12-inch length is more than thin sheet work needs
Compared on paper
| Drill Bit | Shop Score | Type | Sizes | Size Range | Coating | Storage |
|---|---|---|---|---|---|---|
| OSTTE 5-Piece Step Set | 9.6/10 | Step bit set | 50 sizes, 5 bits | 3/16 to 1-3/8 in | Titanium | Aluminum case |
| NEIKO 10184A Step Bit | 9.6/10 | Step bit | 9 steps, 1 bit | 1/4 to 3/4 in | Titanium nitride | Not stated |
| IRONANT 3-Piece Step Set | 9.6/10 | Step bit set | 28 sizes, 3 bits | 1/8 to 3/4 in | Titanium | Portable bag |
| AUYAARS 19-Piece Hex Set | 9.5/10 | Twist bit set | 19 pieces | 1/16 to 1/4 in | Titanium | 1/4 in hex shank |
| NEIKO 10047A Long Bit Set | 9.5/10 | Twist bit set | 5 pieces | 1/8 to 3/8 in | Not stated | Not stated |
These numbers are the tool makers’ rated figures, as their listings print them on 19 November 2026.
How the points were given
Each bit is scored out of 10 on performance, build, value, safety and warranty, with the weights published on the How We Pick page. For drill bits, safety means a split-point tip that centers the bit and keeps it from walking, plus flutes that clear chips. None of the five states a warranty term.
| Product | Shop Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| OSTTE 5-Piece Step Set | 9.6 | 32 | 21 | 21 | 7 | 0 |
| NEIKO 10184A Step Bit | 9.6 | 30 | 21 | 20 | 7 | 0 |
| IRONANT 3-Piece Step Set | 9.6 | 28 | 20 | 21 | 7 | 0 |
| AUYAARS 19-Piece Hex Set | 9.5 | 27 | 20 | 20 | 7 | 0 |
| NEIKO 10047A Long Bit Set | 9.5 | 28 | 20 | 19 | 5 | 0 |
We map each tool’s weighted total onto a 9.2 minimum and 9.8 maximum in a straight line, so the point order and score order match.
What the listings tell you
Five drill bit listings cover three step bits and two twist bit sets. Four of the five state a titanium coating, and the fifth, the NEIKO long bits, states M2 high-speed steel. Size ranges run from 1/16 in on the AUYAARS set to 1-3/8 in on the OSTTE set. No listing states a warranty term.
Buying guide: the best drill bit to drill through metal
Step bit or twist bit
A step bit drills many sizes with one bit: the NEIKO 10184A covers 9 steps from 1/4 in to 3/4 in, the IRONANT set covers 28 sizes across 3 bits, and the OSTTE set covers 50 sizes across 5 bits. A twist bit drills one size per bit: the AUYAARS set covers 19 pieces from 1/16 in to 1/4 in, and the NEIKO long set covers 5 sizes from 1/8 in to 3/8 in. Pick a step bit for many hole sizes, and a twist set when each hole has one size.
Split point and flutes
A split point centers the bit so it does not walk off the mark. The NEIKO 10184A and the AUYAARS set state a 135-degree split point, while the IRONANT and OSTTE sets state a 118° split point. The NEIKO 10184A pairs its point with a 2-flute spiral design that deburrs and expands holes, and the IRONANT pairs its point with a dual-flute design that clears chips faster. The AUYAARS spiral flutes clear chips to reduce heat and chatter.
Shank and chuck fit
The shank decides which chuck holds the bit. The NEIKO 10184A states a 3/8 in tri-flat shank for 3-jaw chucks, cordless drills and drill presses, and the AUYAARS set states a 1/4 in hex shank for quick-change chucks, power drills, cordless screwdrivers and impact drivers. The IRONANT, OSTTE and NEIKO long sets state no shank size, so check the shank against your chuck. A tri-flat shank grips with less wobble, and a hex shank swaps fast in a quick-change chuck.
Size range and coating
Size range decides which holes the set can drill. Ranges here run from 1/16 in to 1/4 in on the AUYAARS set to 3/16 in to 1-3/8 in on the OSTTE set, with the NEIKO 10184A at 1/4 in to 3/4 in and the IRONANT set at 1/8 in to 3/4 in. Four of the five state a titanium coating for durability and heat resistance, while the NEIKO long set states M2 high-speed steel. Compare the top size against the largest hole on your job list.
For the next job, a drill and tap set cuts threads after the hole is drilled.
Read the manual before first use, wear eye protection, keep the work area clear and ventilated, and stay within every stated rating. Read our Safety Disclaimer.
Garage Fit Check
- Check the shank against your chuck: the NEIKO 10184A states a 3/8 in tri-flat shank, and the AUYAARS set states a 1/4 in hex shank.
- Keep the OSTTE set in its aluminum case and the IRONANT set in its portable bag.
- Count the sizes before the first job: the OSTTE set covers 50 sizes, the IRONANT set 28, and the AUYAARS set 19 pieces.
- Note the stainless steel limit: the IRONANT set is not recommended for stainless steel.
FAQ: garage tools
What is the best drill bit to drill through metal?
The OSTTE 5-piece set covers the widest range here, with 50 sizes from 3/16 in to 1-3/8 in in titanium-coated high-speed steel. The NEIKO 10184A is the pick for a single bit, with 9 steps from 1/4 in to 3/4 in.
Can a step bit drill stainless steel?
The NEIKO 10184A and the OSTTE set state stainless steel among the materials they drill. The IRONANT set states it is not recommended for stainless steel, so check the material list on the set you pick.
Do these drill bits fit a regular drill?
The NEIKO 10184A states a 3/8 in tri-flat shank for regular drill chucks and drill presses. The AUYAARS set states a 1/4 in hex shank for quick-change chucks and impact drivers. The other three sets state no shank size, so check the shank against your chuck.
How do I keep a drill bit from walking on metal?
A split-point tip centers the bit so it does not walk off the mark. The NEIKO 10184A and the AUYAARS set state a 135-degree split point that prevents walking, while the IRONANT and OSTTE sets state a 118° split point for self-centering starts.
Related: the best drill bit to drill through steel, step drill bit uses, our engine and shop equipment hub and our best drill and tap set.




