Best Floor Jack for Honda Odyssey (2026): 4 Picks Compared

A flat tire on the family minivan turns a quiet driveway morning into a garage job, and the jack in the corner decides whether that job goes smoothly or drags. The best floor jack for honda odyssey has to slide under the van, lift it high enough for a tire change or brake work, and hold steady while rated stands take the load. This guide compares the jacks below by capacity, lift range, saddle height, safety listing and warranty, using only what each listing publishes.

GarageToolHQ earns a commission when you buy through links on this page, at no extra cost to you. Read our affiliate disclosure.

Picks for the garage

#	Product	Shop Score	Buy
1	Jack Boss 3 Ton Low Profile	9.7/10	Buy on Amazon
2	Jack Boss Floor Jack 3 Ton Capacity Fast Lift	9.6/10	Buy on Amazon
3	Electric Car Jack 5 Ton 12V Floor Jack	9.6/10	Buy on Amazon
4	TONDA Floor Jack, 3,800 lb Hydraulic Car Jack	9.5/10	Buy on Amazon

1

Jack Boss 3 Ton Low Profile

Jack Boss·9.7/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 3 ton aluminum and steel racing-style floor jack with a 3-15/16 to 18-5/16 in range and a dual piston pump.

Check price on Amazon

Pros

• Aluminum body keeps a 3 ton jack to 58.5 lb
• States ANSI/ASME PASE compliance and a 1.5x overload check
• Dual piston quick lift
• Rubber saddle and two-piece handle

Cons

• 3-15/16 in start is the highest minimum here
• Pricier than the steel jacks
• 1 year limited warranty
• Compliance is self-declared

2

Jack Boss Floor Jack 3 Ton Capacity Fast Lift

Jack Boss·9.6/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 3-ton heavy duty steel hydraulic floor jack with a lift range from 5.15" to 18.3", swivel casters and ANSI/ASME PASE and CE listings.

Check price on Amazon

Pros

• 3 tons (6,600 lbs) capacity for cars, trucks and SUVs, per the listing
• Lift range from 5.15" to 18.3"
• Heavy duty steel construction with a rugged universal joint for load control
• Meets ANSI/ASME PASE safety standards and complies with CE certification

Cons

• No warranty term is stated
• No weight stated in the listing data
• Saddle diameter of 4 inch must match the Odyssey's lift points
• Minimum height of 5.15" is higher than the low profile pick's 3-15/16"

3

Electric Car Jack 5 Ton 12V Floor Jack

STANDTALL·9.6/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 5-ton 12V electric floor jack kit with an impact wrench, a built-in inflator pump, a 5.9 to 17.7 inch lift range and a self-locking structure.

Check price on Amazon

Pros

• 5 tons (10,000 lbs) capacity, the highest in this group
• Lifts from 5.9 to 17.7 inches in 1 minute, per the listing
• Kit includes an impact wrench, inflator pump, safety hammer, gloves and a case
• Self-locking structure with automatic stop at the height limit

Cons

• No warranty term is stated
• No safety certification stated, and no ASME PASE listing
• Needs a 12V power source, and the 3.5m power cable limits reach from the vehicle
• No saddle diameter stated in the listing data

4

TONDA Floor Jack, 3,800 lb Hydraulic Car Jack

TONDA·9.5/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A lightweight 14.3-pound hydraulic car jack with a 3,800 lb capacity, 4.9 to 11.8-inch lift range, and built-in carrying handle.

Check price on Amazon

Pros

• 14.3 pounds with an integrated handle for easy carrying
• 1-year warranty stated by the manufacturer
• 4.9-inch minimum height fits under standard passenger cars
• Built-in safety bypass valve protects against overloading

Cons

• 11.8-inch maximum lift is the lowest in this guide
• 3,800 lb capacity falls below the standard 2-ton threshold
• No ASME PASE certification stated

Compared on paper

Specs are the manufacturer’s ratings as listed, collected 28 October 2026. Only the low profile listing names minivans directly; check each listing against the Odyssey’s parameters before ordering.

How the points were given

Each jack is scored on performance, build, value, safety and warranty. Safety points need a stated safety listing or safety feature, and warranty points need a stated term with a concrete length. Only the low profile pick states a warranty term, and only two picks state an ASME PASE listing.

Shop Scores range from a low of 9.2 to a high of 9.8, with each tool positioned by its weighted points proportionally, and more points always yields a higher score.

How to choose the best floor jack for honda odyssey

Capacity and lift range

Capacity comes first, because the jack has to lift the corner being worked on with margin to spare. This group states 3 tons (6,600 lbs) for both Jack Boss picks, 5 tons (10,000 lbs) for the STANDTALL electric pick, and 3,800 lb for the TONDA pick. Lift range matters next: the low profile pick runs from 3-15/16″ to 18-5/16″, the steel pick from 5.15″ to 18.3″, the electric pick from 5.9 to 17.7 inches, and the TONDA pick from 4.9″ to 11.8″. Match both figures to the Odyssey’s parameters and the job, and never rely on capacity alone.

Low profile or standard saddle height

Minimum saddle height decides whether the jack slides under the van at all. The low profile pick starts at 3-15/16″, which the listing describes for vehicles with limited ground clearance, while the steel pick starts at 5.15″, the electric pick at 5.9 inches, and the TONDA pick at 4.9″. Measure the clearance at the lift point before ordering, and pick the lowest minimum height that still reaches the height the job needs.

Electric or hydraulic

Hydraulic jacks lift by pumping, and the low profile pick uses a dual-piston pump that reduces the number of pumps needed. The electric pick rises and lowers with the press of a button, lifts from 5.9 to 17.7 inches in 1 minute, and adds an impact wrench and an inflator pump to the same case. Electric suits a roadside flat tire, while hydraulic suits a garage where pumping is no trouble; the trade is power source against simplicity, since the electric pick needs a 12V source and its power cable is 3.5m.

Safety and warranty

Never get under a vehicle supported by a jack alone. Use rated stands on solid, level ground, and lift only at the owner’s manual lift points. Two picks state an ASME PASE listing, and the electric pick states a self-locking structure with an automatic stop at the height limit. Only the low profile pick states a warranty term, a limited 1-year manufacturer warranty, while the other listings state no warranty term.

Garage Fit Check

• Plan shelf space: the low profile jack measures 28.3″ L x 13.7″ W x 7.8″ H, and the STANDTALL kit measures 11.4 x 4.7 x 17.7 inches with a plastic case.
• Power: the electric pick needs a 12V source, and its power cable is 3.5m, so park within reach of power before lifting.
• Saddle check: the steel jack states a 4 inch saddle diameter, and the other listings state no saddle size, so check the saddle against the Odyssey’s lift points.
• Stands: keep rated stands on solid, level ground beside the jack, and never work under a vehicle held by a jack alone.
• Minivan fit: only the low profile listing names minivans, and the steel listing asks buyers to check vehicle parameters, so confirm fit before ordering.

FAQ: garage tools

What capacity floor jack suits a Honda Odyssey?

This group states 3 tons (6,600 lbs), 5 tons (10,000 lbs) and 3,800 lb. Capacity alone does not confirm fit, so check the Odyssey’s parameters and the owner’s manual lift points before ordering.

Is a low profile jack needed for a minivan?

It depends on clearance at the lift point. The low profile pick starts at 3-15/16″, against 5.15″ for the steel pick, 5.9 inches for the electric pick and 4.9″ for the TONDA pick. Measure the clearance first, and pick the lowest minimum height that reaches the height the job needs.

Electric or hydraulic for driveway tire changes?

Electric suits a roadside flat tire: the STANDTALL pick rises and lowers by button, lifts in 1 minute, and packs an impact wrench and inflator pump in the same case, but it needs a 12V source. Hydraulic suits a garage where pumping is no trouble, and the low profile pick’s dual-piston pump reduces the number of pumps needed.

What safety gear goes with a floor jack?

Rated stands on solid, level ground, used at the owner’s manual lift points. Never get under a vehicle supported by a jack alone, and check the listing’s safety listing before the first job.

Which pick states a warranty?

Only the low profile pick, with a limited 1-year manufacturer warranty. The steel, electric and TONDA listings state no warranty term.

Related: our floor jack for SUV guide, 3-ton jack stands, jack stands for home garage and all jacks and stands guides.