Best Magnetic Pickup Tool Large Magnet with Release Handle (2026)

A bolt slips from your fingers during a brake job and rolls under the workbench, out of sight and out of reach. You could shift the bench, or you could sweep the floor with a magnet and let the tool do the hunting. The best magnetic pickup tool large magnet with release handle gathers loose nuts, bolts and screws, then drops them into your hand with a pull of the release handle. This guide compares these tools by stated pull, reach, magnet type, handle and release, so you can pick the tool that fits your garage.

GarageToolHQ earns a commission when you buy through links on this page, at no extra cost to you. Read our affiliate disclosure.

Picks for the garage

#	Product	Shop Score	Buy
1	Magnetic Pickup Tool – Large Magnet with 25lb	9.6/10	Buy on Amazon
2	ULIBERMAGNET 2 Pack Strong Magnetic Pickup	9.5/10	Buy on Amazon
3	ULIBERMAGNET Heavy Duty Strong Magnetic Pickup	9.5/10	Buy on Amazon
4	MUTUACTOR Strong Magnetic Pickup Tool with Release	9.5/10	Buy on Amazon
5	SE Magnetic Separator Pick-Up Tool with Quick	9.4/10	Buy on Amazon

1

Magnetic Pickup Tool – Large Magnet with 25lb

Stalwart·9.6/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A long-handled floor sweeper with a large magnet, a stated 25 lb pull, a 27.5-inch handle and a quick release trigger, in metal, aluminum and plastic.

Check price on Amazon

Pros

• 25 lb pull stated for nuts, bolts, screws and washers
• 27.5-inch handle gets to hard-to-reach areas without bending over
• Quick release trigger drops collected items with a simple pull
• Metal, aluminum and plastic build with a 4-inch-wide handle

Cons

• No warranty term stated on the listing
• No magnet grade stated
• 27.5 inches long, so it needs wall or corner storage
• 4.5-inch-square head covers a narrow path per pass

2

ULIBERMAGNET 2 Pack Strong Magnetic Pickup

ULIBERMAGNET·9.5/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 2 pack of strong lift magnets with N52 neodymium magnets, quick release and ergonomic rubber handles for iron plate, tool steel and laser cutting.

Check price on Amazon

Pros

• N52 neodymium magnet stated for strong lifting
• 2 pack covers more than a single tool
• Ergonomic rubber handle eases hand pressure
• Quick release for one-handed pick up and put down

Cons

• No pull figure stated
• No dimensions stated
• No weight stated
• No warranty term stated

3

ULIBERMAGNET Heavy Duty Strong Magnetic Pickup

ULIBERMAGNET·9.5/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A heavy-duty pickup tool with an N52 neodymium disc magnet and quick release, listed to handle up to 80 degrees Celsius, for iron plate, tool steel and laser cutting.

Check price on Amazon

Pros

• N52 neodymium disc magnet for full magnetic force
• Listed to handle up to 80 degrees Celsius
• CPC material protection for safe demagnetization
• Quick release with one-handed pick up and put down

Cons

• No pull figure stated
• No dimensions stated
• No weight stated
• No warranty term stated

4

MUTUACTOR Strong Magnetic Pickup Tool with Release

MUTUACTOR·9.5/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A retractable neodymium magnet sweeper with a 2.75-inch magnet in a black plastic shell and a rubber handle, made for gripping heavy thick iron plate and block.

Check price on Amazon

Pros

• 2.75-inch neodymium magnet stated
• Rubber handle for a comfortable grip on heavy items
• Plastic housing will not mar or scratch surfaces
• Nickel plating protects against rust

Cons

• No pull figure stated
• No warranty term stated
• 7.87 inches by 6.1 inches by 3.15 inches, the bulkiest body here
• Sold as a single piece

5

SE Magnetic Separator Pick-Up Tool with Quick

SE·9.4/10 Shop Score

i

The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A compact magnetic separator with an 8 lb capacity, a rubberized grip handle and quick release, made for metal shavings and ferrous object retrieval.

Check price on Amazon

Pros

• 8 lb capacity stated for metal shavings
• 0.25 lb body, easy to carry
• Rubberized grip handle for comfort and control
• Compact 2.25-inch by 2.25-inch by 4.4-inch body

Cons

• 8 lb capacity is the lowest pull here
• No warranty term stated
• Compact size suits shavings more than plate work
• No magnet grade stated

Compared on paper

Pull and reach figures are as stated on each listing. Where a listing does not state a figure, the table says Not stated. Specifications are manufacturer stated, as published on each listing and collected 11 November 2026.

How the picks were scored

Each tool is scored on performance, build, value, safety and warranty. Performance weighs the stated pull and magnet most, build weighs materials and handle, value weighs what the listing gives for the class, safety weighs stated safety features, and warranty weighs a stated term. The method page explains the weights.

Shop Scores range from a low of 9.2 to a high of 9.8, with each tool positioned by its weighted points proportionally, and more points always yields a higher score.

What the listings tell you

Five magnetic pickup tool listings were read for this guide. Two list N52 neodymium magnets, and a single listing states a 2.75-inch magnet diameter. A single listing states a 25 lb pull, and a single listing states an 8 lb capacity. A single listing gives a 2 pack, and a single listing states its tool can handle up to 80 degrees Celsius. No listing states a warranty term, and no listing states a light, so a light is not part of this comparison.

Buying guide: the best magnetic pickup tool large magnet with release handle

Pull: match the magnet to the job

Pull is the headline figure, and only two listings here state a pull figure. The Stalwart sweeper states a 25 lb pull, which suits loose hardware on the floor. The SE separator states an 8 lb capacity, which suits metal shavings and small ferrous parts. Where no pull is stated, the magnet type and size are the clues: N52 neodymium and a 2.75-inch magnet diameter point to a strong tool, but the listing does not put a figure on it.

Reach: long handles save bending

The Stalwart handle is 27.5 inches long, and the tool measures 4.5 inches by 4.5 inches by 27.5 inches. That length gets a magnet under benches and into corners while you stay upright. The other picks are hand tools built for bench work and plate handling rather than floor sweeping.

Release handle: drop the load cleanly

Every pick here has a release handle or trigger. Pull the release handle and the magnet parts from the item, so collected screws drop into a tray or a bin instead of being pried off by hand. Check the handle action before the first job: it should move freely and return to place.

Magnet type: N52 neodymium leads

Two listings state N52 neodymium magnets: the ULIBERMAGNET 2 pack and the heavy-duty ULIBERMAGNET tool. The MUTUACTOR listing states a 2.75-inch neodymium magnet. The Stalwart and SE listings state a strong magnet without naming a grade, so their pull figures carry the comparison.

Grip and size: check the handle and the footprint

Rubber handles appear on most picks here: the ULIBERMAGNET 2 pack, the MUTUACTOR tool and the SE separator all state a rubber or rubberized grip. The Stalwart handle is 4 inches wide. Footprints range from the SE separator at 2.25 inches by 2.25 inches by 4.4 inches to the MUTUACTOR tool at 7.87 inches by 6.1 inches by 3.15 inches, so check the tool fits the drawer, shelf or bench where it will live.

Garage Fit Check

• Space: the Stalwart sweeper is 27.5 inches long, so give it a wall hook or a corner where the head stays clear of the floor.
• Power: these are hand tools, and no listing states a cord or a battery. The MUTUACTOR listing states its tool moves plates without a connection to a power supply.
• Storage: the SE separator measures 2.25 inches by 2.25 inches by 4.4 inches and fits a drawer; keep magnet faces clear of loose screws so they stay clean.
• Before the first job: check that the release handle moves freely and that the magnet face is clear, then sweep a small patch of floor first.
• Heat: the heavy-duty ULIBERMAGNET listing states its tool can handle up to 80 degrees Celsius; keep the other picks away from hot work.

FAQ: garage tools

What does a magnetic pickup tool with a release handle do?

It picks up ferrous items such as nuts, bolts, screws and washers with a magnet, then drops them when you pull the release handle. The Stalwart listing states its tool gathers loose hardware from the workshop floor, and the ULIBERMAGNET listings state pulling the release handle separates the tool from the item.

How much can these magnetic pickup tools lift?

The Stalwart listing states a 25 lb pull, and the SE listing states an 8 lb capacity. The other listings here do not state a pull figure, so their magnet type and size are the only clues.

How long is the long-handled magnetic pickup tool?

The Stalwart handle is 27.5 inches long, and the tool measures 4.5 inches by 4.5 inches by 27.5 inches. The other picks are hand tools without a stated handle length.

Do these tools pick up metal shavings?

The SE listing states its tool lifts metal shavings and ferrous debris, and the Stalwart listing states it gathers loose nuts, bolts, screws and washers. The other listings aim at plate and sheet handling rather than shavings cleanup.

How do you release items from the magnet?

Pull the release handle or trigger. The Stalwart listing states items release with a pull of the quick release trigger, and the ULIBERMAGNET listings state pulling the release handle lets the tool part from the item.

Related: the engine and shop equipment hub, the best magnetic pickup tool for lathe chips, the magnetic sweeper vs push broom, the parts tray magnetic guide, the best welding magnets for body panels and the tool storage ideas for a small garage.