Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Where Do You Put Fuel Injector Cleaner in Your Car

Pour fuel injector cleaner into the fuel tank before filling up, so it mixes with the fuel in the tank before the fuel reaches the injectors.

Where Do You Put Fuel Injector Cleaner in Your Car
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1STP Super Concentrated Fuel Injector CleanerSTP Super Concentrated Fuel Injector Cleaner9.6/10View on Amazon
  2. 2Liqui Moly Jectron Fuel Injection CleanerLiqui Moly Jectron Fuel Injection Cleaner9.6/10View on Amazon
  3. 3Liqui Moly Jectron Gasoline Fuel InjectionLiqui Moly Jectron Gasoline Fuel Injection9.5/10View on Amazon
  4. 4Royal Purple 18000 Max Atomizer Fuel InjectorRoyal Purple 18000 Max Atomizer Fuel Injector9.4/10View on Amazon

The engine idles rough, and the throttle feels slow to answer when you pull away. The job is a fuel system clean, and the question that comes with it is where do you put fuel injector cleaner. You pour it into the fuel tank before you fill up, so it mixes with the fuel in the tank, and the fuel then carries it to the injectors. That is the whole answer: the tank is the place, and the fill-up does the mixing.

GarageToolHQ earns a commission when you buy through links on our product pages, at no extra cost to you. Read our affiliate disclosure.

Below: how the cleaner gets from the tank to the injectors, the pour-in steps, and the bottles that fit this job.

STP Super Concentrated Fuel Injector Cleaner

STP Super Concentrated Fuel Injector Cleaner

STP9.6/10 Shop Score
i
The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 12-count pack of 5.25 fl oz bottles of concentrated fuel injector cleaner; the listing states it treats 21 gallons, unclogs dirty fuel injectors and works with cap-less gas systems.

Pros

  • Treats 21 gallons, per the listing
  • Unclogs dirty fuel injectors to restore performance
  • Works with cap-less gas systems
  • 12-count pack of 5.25 fl oz bottles

Cons

  • No warranty term is stated on the listing
  • The saves gas claim has no figure attached
  • Flash point of 44.0 degrees Celsius, so keep it away from heat and open flame
  • No pour spout is stated on the listing
Liqui Moly Jectron Fuel Injection Cleaner

Liqui Moly Jectron Fuel Injection Cleaner

Liqui Moly9.6/10 Shop Score
i
The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 300 ml bottle of fuel injection cleaner, listed as 10.1 fl oz, that states smoother idling, better throttle response and cleaner combustion.

Pros

  • States smoother idling and better throttle response
  • States it eliminates starting problems, hesitation and stalling
  • Size is stated two ways, 300 ml and 10.1 fl oz
  • Pack of 1, per the listing

Cons

  • No warranty term is stated on the listing
  • Dimensions are listed as 0.0 inches, no usable size
  • No treat amount in gallons is stated
  • No cap-less system statement on the listing
Liqui Moly Jectron Gasoline Fuel Injection

Liqui Moly Jectron Gasoline Fuel Injection

Liqui Moly9.5/10 Shop Score
i
The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 4-pack of Liqui Moly Jectron gasoline fuel injection cleaner with the same stated benefits as the standard Jectron bottle: smoother idling, better throttle response and cleaner combustion.

Pros

  • States smoother idling and better throttle response
  • States it eliminates starting problems, hesitation and stalling
  • 4-pack, part number 2007-4pk
  • Same stated benefits as the standard Jectron bottle

Cons

  • No warranty term is stated on the listing
  • No size, weight or dimensions are stated
  • No treat amount in gallons is stated
  • No cap-less system statement on the listing
Royal Purple 18000 Max Atomizer Fuel Injector

Royal Purple 18000 Max Atomizer Fuel Injector

Royal Purple9.4/10 Shop Score
i
The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 10-pack of 6 oz bottles of Royal Purple Max Atomizer fuel injector cleaner, part number 18000.

Pros

  • 10-pack of 6 oz bottles
  • Part number 18000 matches model 18000
  • Bulk format for repeated use
  • No conflicting figures between title and spec table

Cons

  • No warranty term is stated on the listing
  • No bullets: no stated benefits on the listing
  • No weight or dimensions are stated
  • No treat amount in gallons is stated

Where do you put fuel injector cleaner? How it gets to the injectors

Fuel injector cleaner is a pour-in additive, which means it goes in with the fuel. Pour it into the fuel tank, then fill the tank, and the fuel carries the cleaner through the lines to the injectors as the engine runs. The filler neck is the entry point, and the STP listing states its cleaner works with cap-less gas systems.

Pouring the cleaner in before the fill-up matters because the incoming fuel stirs it through the tank. The label on the bottle is the last word: if the maker gives a direction for the pour, follow it.

How to add fuel injector cleaner

The steps for a pour-in bottle are:

  1. Read the label. Check the maker directions and cautions on the bottle before you open it.
  2. Pour it into the fuel tank. Open the filler cap, if your car has one, and pour the cleaner in through the filler neck.
  3. Fill the tank. The incoming fuel mixes the cleaner through the tank.
  4. Drive as usual. The fuel carries the cleaner to the injectors as the engine runs.

Never pour fuel injector cleaner into the oil fill or the coolant reservoir: it is a fuel additive, and the fuel tank is the place for it.

Fuel injector cleaners for this job

The cleaners below are the pour-in bottles for this job, and the cards state the size and pack each listing gives, plus the treat amount where a listing states one.

Garage safety

Read the manual before first use, wear eye protection, keep the work area clear and ventilated, and stay within every stated rating. Read our Safety Disclaimer.

Handling fuel injector cleaner safely

Fuel injector cleaner is a chemical additive, so keep the bottle closed when it is not in use. The STP listing gives a flash point of 44.0 degrees Celsius, so keep that bottle away from heat and open flame. Follow the label for storage and handling.

FAQ: garage tools

Do you put fuel injector cleaner in the gas tank or the oil?

In the gas tank. Fuel injector cleaner is a fuel additive, so it goes in with the fuel, not in the oil fill. Pour it into the tank through the filler neck, then fill up.

How much fuel injector cleaner do I use per tank?

Follow the label on the bottle you buy. The STP listing states its cleaner treats 21 gallons, while the Liqui Moly Jectron (on Amazon) listing states a 300 ml bottle with no treat amount in gallons.

Can I use fuel injector cleaner with a cap-less gas system?

Yes, if the listing states it. The STP Super Concentrated (on Amazon) listing states it works with cap-less gas systems, so check the label of the cleaner you buy.

What does fuel injector cleaner do?

The STP listing states it unclogs dirty fuel injectors to restore performance and helps restore lost power and acceleration, while the Liqui Moly listings state smoother idling, better throttle response and cleaner combustion. Those are the maker claims, stated on the listings.

Can I add fuel injector cleaner to a full tank?

Check the label on the bottle you buy first: if it directs adding before a fill-up, follow that, since the incoming fuel stirs the cleaner through the tank. The cleaner still goes in the fuel tank either way, never in the oil or the coolant.

Related: when to use fuel injector cleaner, the best fuel injector cleaner roundup, the octane booster vs fuel injector cleaner comparison and the fuel stabilizer vs fuel injector cleaner comparison. Also see the method page.

More buying guides

Engine and Shop Equipment ·

AC Compressor Oil Capacity: How Much to Add

AC compressor oil capacity is set by the vehicle and compressor, not by the bottle: check the service manual, match the PAG viscosity, and…

Engine and Shop Equipment ·

Manual Truck Tire Changers: Types and Uses

A manual truck tire changer breaks the bead and mounts truck tires by hand, and the right pick starts with matching its rim range…