Best Car Ramps and Lifts (2026): 5 Picks Compared
Five ramps and lifts for oil changes and underbody work, compared by lift height, capacity, material, weight and what each listing states about safety.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best Overallburipes Hydraulic Ramps9.6/10View on Amazon - 2
Best HydraulicCOZONY Hydraulic Ramps9.6/10View on Amazon - 3
Best High CapacityROBLOCK 8-Inch Ramps9.6/10View on Amazon - 4
Best Low ProfileROBLOCK 2.6-Inch Ramps9.6/10View on Amazon - 5
Best Simple RampMAXXHAUL 50515 Ramps9.6/10View on Amazon
The oil is drained, the filter is off, and the car still sits too low to reach the drain plug from underneath. Ramps or a lift change that job from a crawl on the concrete to a comfortable reach under the car. The best car ramps and lifts are the ones that match your car, your garage floor and the work you plan to do underneath. This roundup compares ramps and hydraulic lifts for oil changes, tire rotations and underbody work, and says plainly what each listing states and what it does not state.
GarageToolHQ earns a commission when you buy through links on this page, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall buripes Hydraulic Ramps: Hydraulic lift from 7.7 to 13 inches with a 5 ton jack in each ramp Check price on Amazon
- Best Hydraulic COZONY Hydraulic Ramps: Two hydraulic ramps with Q235 steel platforms and adjustable height Check price on Amazon
- Best High Capacity ROBLOCK 8-Inch Ramps: 20,000 pound capacity with an 8 inch lift and anti-slip tread Check price on Amazon
- Best Low Profile ROBLOCK 2.6-Inch Ramps: 2.6 inch lift for low chassis cars with a 17 degree slope Check price on Amazon
- Best Simple Ramp MAXXHAUL 50515 Ramps: 6.25 inch lift with a ridged surface and rubber stops Check price on Amazon
Picks for the garage

2 Packs 11000lbs Hydraulic Car Ramps Low Profile
Hydraulic car ramps with a 5 ton jack in each ramp, adjustable from 7.7 to 13 inches for oil changes and underbody work.
Pros
- 5 ton hydraulic jack built into each ramp
- Adjustable lift from 7.7 to 13 inches
- 11,000 pound capacity in heavy-duty steel
- Extended length for lowered sports cars
Cons
- 79.4 pounds for the pair, so it is heavy to move
- No warranty term is stated on the listing
- No safety listing is stated on the listing
- Top width is 11.4 inches, so check it against wide tires

ROBLOCK 8" Lift Automotive Ramps
PP car ramps with an 8 inch lift and a 20,000 pound capacity for oil changes, inspections and underbody work.
Pros
- 20,000 pound capacity, the highest here
- 8 inch lift with wheel stops and raised rails
- Textured surface and rubber pads for grip
- Stackable and hangable for storage
Cons
- Spec table lists 10.2 inches as the product height, not the 8 inch lift height
- No weight is stated on the listing
- No warranty term is stated on the listing
- No safety listing is stated on the listing

Hydraulic Car Ramp Lift, 12000 LBS, 2 Pack
Hydraulic car ramps with 2 jacks on Q235 steel platforms and adjustable height for sedans, SUVs and light trucks.
Pros
- Hydraulic jacks built into both ramps
- Q235 steel platforms
- Adjustable height for low-clearance vehicles
- One person can set the ramps up in 5 minutes
Cons
- Title and bullets give different height ranges: 9.8 to 15 inches vs 9.48 to 14.2 inches
- Title and bullets give different capacities: 12,000 pounds vs 11,050 pounds
- 86.75 pounds for the pair, so it is heavy to move
- No warranty term is stated on the listing

MaxxHaul 50515 6.25" Lift Car Ramps, 2-Pack – 6
A pair of heavy-duty plastic ramps with a 6.25 in lift, deep grooved surface and rubber stops, rated 3,250 lb per ramp.
Pros
- 6.25 in lift
- Rubber stops on the base
- Ridged surface for traction
- 3,250 lb per ramp
Cons
- Spec table lists another model's 2,200 lb and 2-1/2 in figures
- 90 day warranty
- Incline not stated
- Lower rating than the Ironton

ROBLOCK Car Ramps for Lift and Vehicle
Short low-profile ramps that lift a low car 2.6 in at a 17 degree slope, so a floor jack fits underneath.
Pros
- 2.6 in lift gets a jack under low cars
- Only 17.5 in long, leaves room for the jack
- 10 in wide
- 5.3 lb for the pair
Cons
- Not for working under the car
- Capacity given as 20,000 lb GVW and 5 ton
- No warranty term
- 17 degree slope
Compared on paper
| Model | Shop Score | Type | Lift height | Capacity | Material | Weight | Warranty |
|---|---|---|---|---|---|---|---|
| buripes Hydraulic Ramps | 9.6/10 | Hydraulic ramp, 2-pack | 7.7 to 13 in | 11,000 lb | Steel | 79.4 lb | Not stated |
| ROBLOCK 8-Inch Ramps | 9.6/10 | Ramp, 2 sets | 8 in | 20,000 lb | PP | Not stated | Not stated |
| COZONY Hydraulic Ramps | 9.6/10 | Hydraulic ramp, 2-pack | 9.48 to 14.2 in (title: 9.8 to 15 in) | 12,000 lb (bullets: 11,050 lb) | Q235 steel | 86.75 lb | Not stated |
| MAXXHAUL 50515 Ramps | 9.6/10 | Ramp, 2-pack | 6.25 in | 13,000 lb | Plastic | Not stated | Not stated |
| ROBLOCK 2.6-Inch Ramps | 9.6/10 | Ramp, 2-pack | 2.6 in | 20,000 lb | PP | Not stated | Not stated |
Specifications are manufacturer rated, as published on each listing and collected 3 November 2026. Where a listing contradicts itself, both figures are shown.
How the points were given
Each ramp and lift gets a Shop Score on performance, build, value, safety and warranty. None states an ALI or ASME listing, so all score zero on safety, and none gives a warranty term.
| Product | Shop Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| buripes Hydraulic Ramps | 9.6 | 30 | 21 | 21 | n/a | 0 |
| ROBLOCK 8-Inch Ramps | 9.6 | 29 | 20 | 21 | n/a | 0 |
| COZONY Hydraulic Ramps | 9.6 | 28 | 21 | 20 | n/a | 0 |
Scores run from 9.2 to 9.8: each product’s point total is placed on that range, so more points always means a higher score. Safety counts only for powered gear or where the listing states safety features; where it does not apply, the score is taken over the remaining 90 points.
What the listings tell you
We compared 5 ramp and lift listings. All 5 stated a capacity and a lift height. Only 2 stated a weight, and none stated a warranty term or a safety listing. One listing gave two different height ranges and two different capacities.
Buying guide: choosing the best car ramps and lifts
Lift height and clearance
The picks here lift from 2.6 inches to 14.2 inches. The low-profile ROBLOCK pair lifts 2.6 inches for low chassis cars, the MAXXHAUL pair lifts 6.25 inches, the ROBLOCK 8 inch ramps lift 8 inches, and the hydraulic pairs adjust from 7.7 to 13 inches and from 9.48 to 14.2 inches. Match the lift to the job: an oil change needs less height than a brake job, and a low car needs a shallow approach angle. The COZONY title lists 9.8 to 15 inches instead, so check the listing before you buy.
Hydraulic lift or plain ramp
The COZONY and buripes ramps have a hydraulic jack built into each ramp, so the ramp itself lifts the car and holds it at height. The ROBLOCK and MAXXHAUL ramps are plain ramps: you drive up, and the shape of the ramp holds the car. A hydraulic ramp lifts a low car that cannot climb a steep ramp, while a plain ramp has no jack to maintain.
Capacity and weight
The picks here state capacities from 11,000 pounds to 20,000 pounds. The buripes pair is rated at 11,000 pounds, the COZONY pair at 12,000 pounds in the title and 11,050 pounds in the bullets, the MAXXHAUL pair at 13,000 pounds, and both ROBLOCK pairs at 20,000 pounds. Only 2 of the 5 listings state a weight: the COZONY pair at 86.75 pounds and the buripes pair at 79.4 pounds.
Material and grip
The ROBLOCK ramps are PP plastic and the MAXXHAUL ramps are heavy-duty plastic, while the COZONY ramps use Q235 steel platforms and the buripes ramps are heavy-duty steel. Grip comes from textured surfaces, rubber pads and raised rails: the ROBLOCK 8 inch ramps list a textured surface with rubber pads, and the MAXXHAUL pair lists a ridged surface with rubber stops.
Storage
The ROBLOCK 8 inch ramps stack and hang, per the listing, and measure 43.3 by 13.58 by 10.2 inches. The COZONY pair measures 45.0 by 13.5 by 9.4 inches. The low-profile ROBLOCK pair measures 17.5 by 10 by 3.14 inches.
Check the lift's rated capacity against your heaviest vehicle, and its ceiling and concrete requirements (thickness and strength) before you buy. Install it exactly as the manufacturer specifies, use the mechanical locks before you go under, and look for ALI certification on the model. See the Automotive Lift Institute (ALI). Read our Safety Disclaimer.
Garage Fit Check
- Space: the ROBLOCK 8 inch ramps measure 43.3 by 13.58 by 10.2 inches and the COZONY pair measures 45.0 by 13.5 by 9.4 inches, so check the footprint against your garage floor.
- Storage: the ROBLOCK 8 inch ramps stack and hang, per the listing, and the low-profile ROBLOCK pair measures 17.5 by 10 by 3.14 inches.
- Weight: the COZONY pair weighs 86.75 pounds and the buripes pair weighs 79.4 pounds, so plan how you will move them.
- Before the first job: check the capacity against your vehicle and the lift height against your clearance, and never get under a vehicle held up by a jack or ramp alone.
Use ramps on hard, level ground, drive on slowly and straight, set the parking brake and chock the wheels still on the floor. Stay within the stated capacity, and never work under a vehicle held by a jack alone. Read our Safety Disclaimer.
FAQ: garage tools
Are car ramps safe for oil changes?
Ramps lift the front of the car so you can reach the drain plug and filter. Work on solid, level ground, and never get under a vehicle held up by a jack or a ramp alone. Use rated jack stands on solid, level ground before you go underneath.
What lift height do I need for an oil change?
The low-profile ROBLOCK pair lifts 2.6 inches, the MAXXHAUL pair lifts 6.25 inches, and the hydraulic pairs adjust from 7.7 to 13 inches and from 9.48 to 14.2 inches. More height gives more room underneath, but a low car needs a shallow approach, so match the ramp to your car.
Can I use car ramps on a low car?
The low-profile ROBLOCK pair is made for low chassis cars with a 17 degree slope, and the buripes listing says its extended length works for lowered sports cars that would bottom out on most standard ramps.
How much weight can car ramps hold?
The picks here state capacities from 11,000 pounds to 20,000 pounds. Check the capacity against your vehicle before you drive on.
Do hydraulic car ramps need a floor jack?
No. The COZONY and buripes ramps have a hydraulic jack built into each ramp, so the ramp itself lifts the car.
Related: the best car ramps for oil changes, our best car ramps, our best drive-on car ramps, our best car ramps for lowered cars, our best car ramps for pickup trucks, our best car ramps for steep driveway, our best car lift for home garage, our best car lift for low ceiling, our best car lift for lowered cars, our best aluminum floor jack, our best bottle jack for trucks, our best bottle jack for suv, our best electric floor jack, our best all-in-one jack and jack stand, our air jack vs floor jack, our air jack vs bottle jack, our best atv lift ramps, our best creeper for oil changes, our best cordless ratchet for oil change, our best crush washer kit for oil changes, our best car ramps for honda ridgeline, our best car ramps for mazda miata, our best car ramps for toyota sienna, our best car ramps for subaru ascent, our best car ramps for hyundai santa fe, our best emergency jack for suv, our best emergency jack for flat tires, our aluminum vs steel creeper, our best creeper for concrete garage floor.



