Best Hole Saw for Metal (2026): 5 Picks Compared
Five hole saws for metal compared by size range, TCT or bi-metal build, pilot bits and safety features, from 1 in TCT cutters to an 18-piece kit.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best Size RangeGSTK 8-Piece TCT Set9.6/10View on Amazon - 2
Best for StainlessDECKRKAT 1in TCT9.6/10View on Amazon - 3
Best for Can LightsVIKITON 6.25in Saw9.5/10View on Amazon - 4
Best Big KitKATA 18-Piece Bi-Metal9.5/10View on Amazon - 5
Best 20-Piece KitMilwaukee Hole Dozer9.3/10View on Amazon
The bracket needs a clean hole through steel plate, and the twist bit just walks across the surface. The best hole saw for metal is the cutter that bites stainless and sheet metal without dulling on the first hole. We compared five hole saws and kits by size range, TCT or bi-metal build, pilot bits, safety features and warranty, using only what each listing publishes.
GarageToolHQ earns a commission when you buy through links on this page, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Size Range GSTK 8-Piece TCT Set: 6 TCT sizes from 16 to 45mm with 2 extra pilots Check price on Amazon
- Best for Stainless DECKRKAT 1in TCT: 2-pack of 1 in TCT cutters for stainless steel Check price on Amazon
- Best for Can Lights VIKITON 6.25in Saw: 6.25 in bi-metal saw with a dust bowl, over 95% of dust caught Check price on Amazon
- Best Big Kit KATA 18-Piece Bi-Metal: 18-piece M42 bi-metal kit, 11 blades to 2-1/2 in Check price on Amazon
- Best 20-Piece Kit Milwaukee Hole Dozer: 20-piece Milwaukee Hole Dozer bi-metal kit Check price on Amazon
Picks for the garage

Hole Saw 8 PCS, Hole Saw for Metal
An 8-piece TCT hole cutter set with 6 sizes from 16mm to 45mm, 2 extra pilot bits and 2 springs for stainless steel, iron and aluminum.
Pros
- 6 sizes from 16mm to 45mm cover most sheet metal jobs
- TCT carbide cutters for stainless steel, iron and aluminum
- 2 extra pilot bits and 2 springs included
- Three-edged cutterhead for sharper cuts and faster chip removal
Cons
- Largest size is 45mm, so bigger holes need another saw
- Needs coolant for continuous high-speed drilling
- 8 pieces, fewer than the 18 and 20-piece kits here
- No storage case is stated

2-Pack 1" TCT Hole Saws for Hard Metal
A 2-pack of 1 in TCT hole saws with spring-loaded pilot bits for stainless steel, aluminum, high alloy steel, copper and plastic.
Pros
- TCT cutters made for stainless steel and high alloy steel
- 2-pack gives a spare 1 in cutter
- Spring-loaded pilot bits clear debris as you cut
- 3/8 in 3-flatted shank grips drills and CNC machines
Cons
- Only one size, 1 in, so other holes need other saws
- 1 in cutting length limits deep cuts
- Needs cutting oil to prevent overheating
- Pilot bits need tightening with the included hex wrench

VIKITON 6.25" Hole Saw for Recessed Lights
A 6-1/4 in bi-metal hole saw for 6 in LED can lights with a dust bowl that blocks and collects over 95% of dust.
Pros
- 6-1/4 in size fits 6 in LED can lights
- Dust bowl blocks and collects over 95% of dust
- Bi-metal saw with high speed steel teeth for longer life
- Arbor, replacement drill bit and hex key included
Cons
- Not for stainless steel, plaster, glass, tile or granite
- Single size only, so other holes need other saws
- Dust bowl fits VIKITON saws only, not other brands
- Needs cooling time before touching after drilling

KATA 18 Piece Bi Metal Hole Saw Kit 3/4"-2-1/2"
An 18-piece M42 bi-metal set with 11 blades from 3/4 in to 2-1/2 in, mandrels, drill bits and a hex key in a portable case.
Pros
- 18 pieces with 11 blades from 3/4 in to 2-1/2 in
- M42 bi-metal blades for wood, metal, PVC and drywall
- Mandrels, drill bits and hex key in a portable case
- Covers door locks, panels, vents and speaker holes
Cons
- Thin metal sheet only, not thick hardened steel
- Not for cutting depths beyond about 1-1/2 in
- No warranty term is stated
- Not for tile, concrete, brick, stone, glass or masonry

Milwaukee Electric - Hole Dozer BI-Metal Hole Saw
A Milwaukee Hole Dozer bi-metal hole saw kit with 20 pieces, shipped new in the box with all relevant accessories.
Pros
- 20-piece Hole Dozer bi-metal kit from Milwaukee
- Brand new in box with all relevant accessories
- 20 pieces in one kit for many hole sizes
- Manufacturer warranty is named
Cons
- No sizes are stated
- No warranty term is stated
- No tooth or material details are stated
- No arbor or pilot details are stated
Other tools worth a look
VIKITON 2 inch Hole Saw for WoodCheck price on Amazon
VIKITON 6 inch Hole Saw for WoodCheck price on Amazon
VIKITON 3 inch Hole Saw for WoodCheck price on Amazon
VIKITON 2-1/2 inch Hole Saw for WoodCheck price on Amazon
VIKITON 6-1/2 inch Hole Saw for WoodCheck price on Amazon
Compared on paper
| Hole Saw | Shop Score | Sizes | Material | Pilot | Warranty |
|---|---|---|---|---|---|
| GSTK 8-Piece TCT Set | 9.6/10 | 16 to 45mm, 6 sizes | TCT carbide | 2 extra pilots | Not stated |
| DECKRKAT 1in TCT | 9.6/10 | 1 in (25mm) | TCT carbide | Spring-loaded | Not stated |
| VIKITON 6.25in Saw | 9.5/10 | 6-1/4 in | Bi-metal | Arbor included | Not stated |
| KATA 18-Piece Bi-Metal | 9.5/10 | 3/4 to 2-1/2 in | M42 bi-metal | Mandrels included | Not stated |
| Milwaukee Hole Dozer | 9.3/10 | Not stated | Bi-metal | Not stated | Not stated |
Specs are the manufacturer’s ratings as listed, collected 15 November 2026. None of the five state a warranty term with a concrete length.
How the points were given
The Shop Score weighs performance, build, value, safety and warranty, using only what each listing publishes. For a hole saw, safety means stated warnings to use coolant and wear protective eyewear and gloves, plus features that keep the cut steady. The GSTK set states the fullest warning, and the VIKITON warns to let the saw cool before touching. How we pick explains the weights.
| Product | Shop Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| GSTK 8-Piece TCT Set | 9.6 | 30 | 21 | 22 | 5 | 0 |
| DECKRKAT 1in TCT | 9.6 | 32 | 22 | 21 | 3 | 0 |
| VIKITON 6.25in Saw | 9.5 | 28 | 21 | 20 | 3 | 0 |
| KATA 18-Piece Bi-Metal | 9.5 | 29 | 21 | 22 | 0 | 0 |
| Milwaukee Hole Dozer | 9.3 | 23 | 18 | 19 | 0 | 0 |
Shop Scores range from a low of 9.2 to a high of 9.8, with each tool positioned by its weighted points proportionally, and more points always yields a higher score.
What the listings tell you
We read 5 hole saw listings. Two are TCT carbide cutters for stainless steel and hard metal, and three are bi-metal saws. Sizes run from 1 in to 6-1/4 in, and the kits run from 8 to 20 pieces. None of the five state a warranty term with a concrete length.
How to choose the best hole saw for metal
TCT or bi-metal
TCT carbide is the pick for hard metal. The DECKRKAT cutters are made for stainless steel, aluminum and high alloy steel, and the GSTK set lists stainless steel, iron and aluminum with a reference of 3mm stainless steel and 15mm iron plate. Bi-metal suits thinner work: the VIKITON cuts thin metals but excludes stainless steel, and the KATA cuts thin metal sheet but not thick hardened steel. Match the tooth to the metal, not the other way around.
Size range
Single saws suit one repeated hole. The DECKRKAT is 1 in only, and the VIKITON is 6-1/4 in for 6 in can lights. Sets cover a range: the GSTK set has 6 sizes from 16mm to 45mm, and the KATA set has 11 blades from 3/4 in to 2-1/2 in. The Milwaukee kit has 20 pieces, but the listing states no sizes, so count on the brand and the piece count alone. For sizing help, see our hole saw guide.
Pilot bits and chip clearing
A pilot bit keeps the saw centered, and chip clearing keeps it cutting. The DECKRKAT pilots are spring-loaded for debris removal, and the GSTK set adds 2 extra pilot bits and 2 springs. The VIKITON kit includes an arbor, a replacement drill bit and a hex key, and the KATA set includes mandrels, drill bits and a hex key in a portable case. The GSTK cutterhead uses a three-edged design with a double circular design for chip removal and cooling.
Coolant and safety
Metal cutting makes heat, and heat dulls teeth. The GSTK warning says to add coolant when drilling at high speeds and to wear protective eyewear and gloves. The DECKRKAT tips say to start with lower torque and speed on the pilot bit, then use cutting oil to prevent overheating. The VIKITON says to let the saw cool before touching and to stop at once if abnormal vibration occurs. For more on drilling metal, see our best drill bit for drilling metal.
Read the manual before first use, wear eye protection, keep the work area clear and ventilated, and stay within every stated rating. Read our Safety Disclaimer.
Garage Fit Check
- Check the chuck size: the DECKRKAT uses a 3/8 in shank.
- Keep cutting oil and coolant on the bench before the first cut.
- Store the DECKRKAT cutters in their plastic case and the KATA set in its case.
- Wear protective eyewear and gloves when cutting metal, as the GSTK warning says.
FAQ: garage tools
What is the best hole saw for stainless steel?
The TCT cutters here are the pick. The DECKRKAT 1 in cutters are made for stainless steel, and the GSTK set lists stainless steel with a reference of 3mm. The VIKITON excludes stainless steel.
Can a bi-metal hole saw cut metal?
Yes, thin metal. The VIKITON cuts thin metals but excludes stainless steel, and the KATA cuts thin metal sheet but not thick hardened steel. For stainless and hard metal, use a TCT cutter.
What sizes do hole saw kits cover?
The GSTK set covers 16mm to 45mm in 6 sizes, and the KATA set covers 3/4 in to 2-1/2 in with 11 blades. The Milwaukee kit has 20 pieces, but the listing states no sizes.
Do I need coolant when cutting metal with a hole saw?
The makers say so. The GSTK warning says to add coolant for continuous high-speed drilling, and the DECKRKAT tips say to use cutting oil to prevent overheating.
Which hole saw here has a warranty?
None state a warranty term with a concrete length. The Milwaukee names a manufacturer warranty and the KATA names a limited warranty, both without a term.
Related: the hole saw guide, the best hole saw kit, our cordless tools hub and best drill bits for stainless steel. Also see our hole saw vs step bit for metal. Also see our best step drill bit. Also see our drill bit size guide.




