Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Hole Saw for Wood (2026): 5 Kits Compared

Five hole saw kits for wood compared on size range, cutting depth, tooth material and what comes in the box, with every figure taken from the listings.

Best Hole Saw for Wood (2026): 5 Kits Compared
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1EZUVITA Bi-Metal KitBest OverallEZUVITA Bi-Metal Kit9.7/10View on Amazon
  2. 2GEINXURN Bi-Metal KitWidest RangeGEINXURN Bi-Metal Kit9.6/10View on Amazon
  3. 3VIKITON 4-1/2 Hole SawBest Single SawVIKITON 4-1/2 Hole Saw9.6/10View on Amazon
  4. 4ANGELSWORD 24PC KitMost SizesANGELSWORD 24PC Kit9.5/10View on Amazon
  5. 5HORUSDY 8PCS KitBest Starter KitHORUSDY 8PCS Kit9.5/10View on Amazon

The new shelf brackets need round holes through plywood for cables, and the spade bit keeps tearing the edge while the jigsaw wanders off the line. A best hole saw for wood cuts a clean round hole in a pass, sized to the cable grommet or the pipe that has to pass through. We compared the five hole saw kits below on size range, cutting depth, tooth material and what comes in the box, with every figure taken from the listings. The bi-metal kits lead, while the carbon steel kits suit soft wood and plywood only.

GarageToolHQ earns a commission when you buy through links on this page, at no extra cost to you. Read our affiliate disclosure.

Quick picks

  • Best Overall EZUVITA Bi-Metal Kit: 11 bi-metal saws from 3/4 to 2-1/2 in with one arbor and a case Check price on Amazon
  • Widest Range GEINXURN Bi-Metal Kit: 12 saws from 5/8 to 3 in with two mandrels and shark tooth slots Check price on Amazon
  • Best Single Saw VIKITON 4-1/2 Hole Saw: A 4-1/2 in bi-metal saw with arbor and a spare pilot bit Check price on Amazon
  • Most Sizes ANGELSWORD 24PC Kit: 14 saws from 3/4 to 6 in with two mandrels and five drill bits Check price on Amazon
  • Best Starter Kit HORUSDY 8PCS Kit: Four common sizes for soft wood, plywood and PVC Check price on Amazon

Picks for the garage

EZUVITA 17PCS Bi-Metal Hole Saw Kit

EZUVITA 17PCS Bi-Metal Hole Saw Kit

EZUVITA9.7/10 Shop Score
i
The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 17-piece bi-metal hole saw kit with 11 saws from 3/4 to 2-1/2 in, one arbor for all sizes and a storage case.

Pros

  • 11 hole saw sizes from 3/4 to 2-1/2 in in one kit
  • One mandrel fits all 11 saws, with a dual locking structure
  • Maximum cutting depth of 1-1/2 in, the deepest here
  • Storage case keeps all saws and accessories organized

Cons

  • The pilot bit can break if the workpiece is not held firmly
  • Only one mandrel: a damaged mandrel stops the whole kit
  • No stated weight for the full kit
  • The 1-1/2 in cutting depth is a maximum for the kit, not a per-saw figure
GEINXURN 15PCS Hole Saw Kit

GEINXURN 15PCS Hole Saw Kit

GEINXURN9.6/10 Shop Score
i
The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 15-piece HSS bi-metal hole saw set with 12 saws from 5/8 to 3 in, two mandrels and a case.

Pros

  • 12 hole saw sizes from 5/8 to 3 in, the widest small end here
  • Two mandrels with 3/8 in and 7/16 in hex shanks
  • Shark tooth design for quick change and easy core removal
  • Cuts wood, drywall, PVC boards, thin metal, brass and aluminum

Cons

  • No warranty term is stated
  • No cutting depth is stated
  • Stainless steel can burn if rotated too quickly
  • No spare pilot bits are stated beyond the two mandrels
VIKITON 4-1/2 inch Hole Saw for Wood, Metal

VIKITON 4-1/2 inch Hole Saw for Wood, Metal

VIKITON9.6/10 Shop Score
i
The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A single 4-1/2 in bi-metal hole saw with an arbor, a pilot bit and a spare, made for wood, metal, plastic and drywall.

Pros

  • 4-1/2 in cut with high-speed steel teeth and a flexible steel body
  • Arbor, pilot drill bit, replacement pilot bit and hex key in the box
  • Cuts wood, plastic, drywall and thin metals
  • Lightweight build with fast chip removal stated

Cons

  • One size only: a second hole needs a second saw
  • Not for stainless steel or brittle materials such as glass, ceramic and tile
  • Surface runs hot after drilling and needs time to cool
  • No cutting depth is stated
ANGELSWORD Hole Saw Kit,Hole Saw Set,24pc

ANGELSWORD Hole Saw Kit,Hole Saw Set,24pc

ANGELSWORD9.5/10 Shop Score
i
The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 24-piece hole saw set with 14 saws from 3/4 to 6 in, two mandrels, five drill bits and installation plates.

Pros

  • 14 hole saw sizes from 3/4 to 6 in, the largest range here
  • Two mandrels, five drill bits, a hex key and two installation plates
  • Cutting depth of 1 in across the set
  • High carbon steel for rust resistance and long life

Cons

  • Cannot be used on hard wood, cement, glass or metal
  • Saws larger than 2 in need the installation plate
  • Bench drill advised for precise holes, not a hand drill
  • No storage case is stated
HORUSDY 8PCS Hole Saw Kit, 1"–2-1/8" (25–54mm)

HORUSDY 8PCS Hole Saw Kit, 1"–2-1/8" (25–54mm)

HORUSDY9.5/10 Shop Score
i
The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An 8-piece hole saw kit with four saws from 1-1/4 to 2-1/8 in, two drill bits, a mandrel and a hex key for soft wood and plywood.

Pros

  • Four commonly used sizes: 1-1/4, 1-1/2, 2 and 2-1/8 in
  • Heat-treated carbon steel with a black coated surface
  • Cutting depth within 1 in for common home materials
  • Works with standard electric and impact drills

Cons

  • No warranty term is stated
  • Not for metal or dense hardwood
  • Only four saw sizes, the fewest here
  • Professional-grade tool advised for precise holes or demanding materials

Other tools worth a look

Compared on paper

Hole Saw Shop Score Sizes Cutting Depth Material Pieces
EZUVITA Bi-Metal Kit 9.7/10 3/4-2-1/2 in (11 saws) 1-1/2 in max Bi-metal HSS 17
GEINXURN Bi-Metal Kit 9.6/10 5/8-3 in (12 saws) Not stated HSS bi-metal 15
VIKITON 4-1/2 Hole Saw 9.6/10 4-1/2 in (114 mm) Not stated Bi-metal HSS 4
ANGELSWORD 24PC Kit 9.5/10 3/4-6 in (14 saws) 1 in High carbon steel 24
HORUSDY 8PCS Kit 9.5/10 1-1/4-2-1/8 in (4 saws) 1 in Carbon steel 8

We copy each listing’s rated specs exactly as the manufacturer gives them; as of 18 November 2026.

How the points were given

Each saw is scored out of 10 on performance, build, value, safety and warranty, with the weights published on our How We Pick page. Bi-metal teeth and a full kit earn the most. None of the five kits states a warranty term, so no pick earns warranty points.

Product Shop Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
EZUVITA Bi-Metal Kit 9.7 32 22 21 7 0
GEINXURN Bi-Metal Kit 9.6 30 21 21 6 0
VIKITON 4-1/2 Hole Saw 9.6 29 21 20 6 0
ANGELSWORD 24PC Kit 9.5 28 20 21 5 0
HORUSDY 8PCS Kit 9.5 27 20 20 5 0

The displayed number is the weighted point total scaled linearly between 9.2 and 9.8. Earning more points is the only way up.

What the listings tell you

We read 5 hole saw listings. All five state size ranges, and three state a bi-metal build, but none states a warranty term. Three state a cutting depth, and two include a storage case. One listing gives two piece counts, and one single saw is the only pick without a kit around it.

Buying guide: the best hole saw for wood

Size range first

Match the saw to the hole. The VIKITON saw cuts one size, 4-1/2 in, while the kits run from 5/8 in to 6 in. The ANGELSWORD set reaches 6 in, the GEINXURN set runs 5/8 to 3 in, the EZUVITA kit runs 3/4 to 2-1/2 in, and the HORUSDY kit covers 1-1/4 to 2-1/8 in.

Bi-metal or carbon steel

Three kits here use bi-metal teeth, and two use carbon steel. Bi-metal suits wood, metal and plastic, while the HORUSDY kit is not recommended for metal or dense hardwood and the ANGELSWORD set cannot be used on hard wood, cement, glass or metal. See our bi-metal vs carbide hole saw comparison for more on tooth materials.

Cutting depth

Depth decides whether the saw gets through the board in a pass. The HORUSDY and ANGELSWORD kits state a cutting depth of 1 in, and the EZUVITA kit states a maximum of 1-1/2 in. The VIKITON saw and the GEINXURN set state no depth.

Arbors, bits and cases

The EZUVITA kit uses one mandrel for all 11 saws, and the GEINXURN set includes two mandrels with 3/8 in and 7/16 in hex shanks. The ANGELSWORD set adds two mandrels, five drill bits and two installation plates. See our hole saw size chart before matching a saw to a fitting.

Mind the heat and the vibration

A hole saw runs hot and shakes when it binds. The VIKITON listing warns to let the saw cool before touching it, and the EZUVITA listing warns against touching the saw right after use. Both say to stop at once if abnormal vibration shows up. See our hole saw guide for the basics.

Garage safety

Read the manual before first use, wear eye protection, keep the work area clear and ventilated, and stay within every stated rating. Read our Safety Disclaimer.

Garage Fit Check

  • Check the mandrel against your drill: the HORUSDY kit uses a 1/4 in mandrel, and the GEINXURN set includes 3/8 in and 7/16 in mandrels.
  • Check the cutting depth against the board: 1 in for the HORUSDY and ANGELSWORD kits, and 1-1/2 in maximum for the EZUVITA kit.
  • Check the storage: the EZUVITA and GEINXURN kits include a case, and the other three picks state none.
  • Check the material list first: the HORUSDY kit is not for metal or dense hardwood, and the ANGELSWORD set cannot be used on hard wood, cement, glass or metal.
  • Count the saws: 14 in the ANGELSWORD set, 12 in the GEINXURN set, 11 in the EZUVITA kit, 4 in the HORUSDY kit and 1 in the VIKITON box.

FAQ: garage tools

What size hole saw do I need for wood?

Match the saw to the fitting. The kits here run from 5/8 in to 6 in, and the single VIKITON saw cuts 4-1/2 in, so measure the fitting first.

Can a hole saw for wood cut metal?

Some can. The VIKITON saw cuts thin metals except stainless steel, and the EZUVITA and GEINXURN kits cut metal and thin metal. The HORUSDY kit is not recommended for metal, and the ANGELSWORD set cannot be used on metal.

How deep can these hole saws cut?

The HORUSDY and ANGELSWORD kits state a cutting depth of 1 in, and the EZUVITA kit states a maximum of 1-1/2 in. The VIKITON saw and the GEINXURN set state no cutting depth.

Do these kits work with a standard drill?

The HORUSDY kit works with standard electric and impact drills, and the EZUVITA kit suits most standard electric and impact drills. The ANGELSWORD set works with an electric drill or an impact drill, and the listing advises a bench drill for precise holes.

What comes with a hole saw kit?

It varies. The EZUVITA kit holds 11 saws, 1 mandrel, 4 replacement drill bits and 1 hex key, while the GEINXURN set holds 12 saws, 2 mandrels, a hex wrench and 2 springs.

Related: the best hole saw kit, the best hole saw for thick metal, our cordless tools hub and our saws and grinders hub. Also see our best jigsaw. Also see our best cordless drill impact driver combo kit. Also see our best drill bit for steel.

More buying guides

Cordless Tools ·

Hole Saw Guide: Sizes and Types

How to pick a hole saw by size, tooth type and material, with four kits ranked for wood, thin metal and hard metal.