Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Gasoline Air Compressor Parts: What to Replace

The pressure switch, regulator and relief valve decide whether a gasoline compressor holds pressure, and this guide names the signs each part shows and the parts that cover the repair.

Gasoline Air Compressor Parts: What to Replace
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1MEANLIN MEASURE Air Compressor Pressure SwitchMEANLIN MEASURE Air Compressor Pressure Switch9.7/10View on Amazon
  2. 2Wadoy Central Pneumatic Air Compressor PressureWadoy Central Pneumatic Air Compressor Pressure9.5/10View on Amazon
  3. 3Air Compressor Regulator Assembly ReplacementAir Compressor Regulator Assembly Replacement9.4/10View on Amazon
  4. 4HKAOSDUUH Air Compressor Pressure RegulatorHKAOSDUUH Air Compressor Pressure Regulator9.3/10View on Amazon

The compressor fires up, the tank fills, and then the pressure gauge stops where it should not, or the motor keeps running when it should rest. That is the moment gasoline air compressor parts move from a parts list to the job itself: the pressure switch, the regulator and the relief valve are the parts that decide whether the tank holds pressure and the tools get steady air. This guide names the parts that wear out, the signs each part shows, and the replacement parts that cover the common repairs.

GarageToolHQ earns a commission when you buy through links on our product pages, at no extra cost to you. Read our affiliate disclosure.

Below: what each part does, how to tell it has failed, and the picks that cover the job.

MEANLIN MEASURE Air Compressor Pressure Switch

MEANLIN MEASURE Air Compressor Pressure Switch

MEANLIN MEASURE9.7/10 Shop Score
i
The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A pressure switch, regulator and safety relief valve kit rated for 90 to 120 PSI cut-in and cut-out, with 110V to 240V power, a red on/off knob and a 1 year warranty.

Pros

  • Switch, regulator and relief valve in a single kit
  • Rated 90 to 120 PSI with a 0 to 180 PSI regulator
  • Red on/off knob and smooth-flow adjustment knob
  • 1 year warranty stated

Cons

  • Plastic case and plastic adjustment knob rather than all-metal parts
  • Fixed thread size, so other port sizes need adapters
  • Kit includes parts a switch-only repair does not need
  • No named compressor fit, so check port and pressure range before ordering
Wadoy Central Pneumatic Air Compressor Pressure

Wadoy Central Pneumatic Air Compressor Pressure

Wadoy9.5/10 Shop Score
i
The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A four-port pressure switch rated 90 to 120 PSI on 240V power, with a red on/off knob and a metal body.

Pros

  • Rated 90 to 120 PSI on 240V power
  • Four female inlet ports for a gauge, relief valve or extra outlets
  • Metal construction
  • Red on/off knob for automatic control

Cons

  • Switch only, with no regulator or relief valve in the box
  • No warranty term is stated
  • Single-voltage switch, so match the compressor power supply before ordering
  • No plugs are included for ports left unused
Air Compressor Regulator Assembly Replacement

Air Compressor Regulator Assembly Replacement

Generic9.4/10 Shop Score
i
The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A replacement pressure regulator assembly, part 602412, for the Fortress model 57336.

Pros

  • Genuine replacement assembly for model 57336
  • Restores smooth, accurate adjustment of outlet air pressure
  • Direct fit for quick installation
  • Heavy-duty construction for daily shop use

Cons

  • Regulator only, with no switch or relief valve in the box
  • No warranty term is stated
  • Fits a single named model, so check the part number before ordering
  • Controls outlet pressure only, not the motor on and off cycle
HKAOSDUUH Air Compressor Pressure Regulator

HKAOSDUUH Air Compressor Pressure Regulator

HKAOSDUUH9.3/10 Shop Score
i
The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A pressure regulator that replaces part AB-9051116 and fits Bostitch and Husky compressors with 3 ports.

Pros

  • Direct replacement for part AB-9051116
  • Fits Bostitch and Husky compressors
  • Fits 3 ports
  • Pressure reducer for the compressor outlet

Cons

  • Regulator only, with no switch or relief valve in the box
  • Fits only the named part number, so check the fit before ordering
  • Controls outlet pressure only, not the motor on and off cycle
  • Fits 3 ports, so a setup with more ports needs a different part

Gasoline Air Compressor Parts: What to Replace First

The parts that do most of the pressure-control work on a gasoline compressor are the pressure switch, the pressure regulator and the safety relief valve. The switch turns the motor on and off as tank pressure rises and falls. The regulator sets the outlet pressure the tools see. The relief valve vents pressure if the tank goes past the set range. When a part fails, the symptoms point at it: a motor that never stops, outlet pressure that drifts, or air leaking from a valve that should stay shut.

Part Job it does Sign it has failed Pick that covers it
Pressure switch Turns the motor on and off as tank pressure changes Motor runs without stopping, or never starts Wadoy Pressure Switch
Pressure regulator Sets steady outlet pressure for tools Outlet pressure drifts, or tools get uneven air Fortress Regulator
Relief valve Vents pressure past the set range Air leaks from the valve, or the valve sticks shut MEANLIN Switch Kit
Switch and regulator kit Covers pressure control in a single install Several pressure parts fail at once MEANLIN Switch Kit

The Parts for the Common Repairs

The pressure parts below cover the repairs this guide describes, from a switch that no longer holds the set range to a regulator that no longer holds outlet pressure, and each card says which part of the job it handles.

Compressor safety

Drain the tank after use so water does not rust it from the inside, never exceed the tool's rated pressure, wear eye protection, and run 240V units on the circuit the manual calls for. Do not run a gas engine compressor in a closed garage. Read our Safety Disclaimer.

What to Check Before Ordering

Match the part to the compressor before ordering. Check the part number on the old part against the replacement: the HKAOSDUUH regulator (on Amazon) replaces part AB-9051116, and the Fortress assembly is part 602412 for model 57336. Match the pressure range as well: the switches here are rated 90 to 120 PSI, and the MEANLIN regulator adjusts from 0 to 180 PSI. Match the power supply too: the Wadoy switch (on Amazon) runs on 240V power, while the MEANLIN kit runs on 110V to 240V power. A switch wired to the wrong supply will not control the motor the way it should, so have a licensed electrician handle the wiring.

FAQ: garage tools

How do I know the pressure switch has failed?

The switch turns the compressor on and off as tank pressure changes, holding the set range. If the motor runs without stopping, or never starts while the tank still has air to give, the switch is the part to check first. The switches in this guide hold a 90 to 120 PSI range, so a switch that no longer holds that range has reached the end of its service.

What does the pressure regulator do?

The regulator sets the outlet pressure the tools see, so a sander and a spray gun each get steady air at the pressure the regulator is set to. If outlet pressure drifts while the tank holds steady, or tools surge and fade, the regulator is the part to replace. The Fortress assembly restores smooth, accurate adjustment of outlet pressure, and the MEANLIN kit pairs its regulator with a switch and a relief valve.

What is the safety relief valve for?

The relief valve vents pressure if the tank goes past the set range, so a stuck switch or a failed regulator cannot keep building pressure without a release. The MEANLIN kit includes a safety pressure relief valve with its switch and regulator, and the Wadoy switch leaves ports free so a relief valve can be added to the setup.

Can the pressure switch be replaced at home?

The makers describe these swaps as easy to install, and the Fortress regulator installs directly in place of the original part. The switch still wires into mains power, so the wiring belongs to a licensed electrician, and the tank should hold no pressure while the parts are changed.

Do these parts fit every compressor?

No. Fit follows the part number and the model, not the brand alone: the HKAOSDUUH regulator replaces part AB-9051116 on Bostitch and Husky compressors, and the Fortress assembly fits model 57336 as part 602412. Check the part number on the old part, the pressure range, and the power supply before ordering, and skip a part that names a different model.

Related: gas vs electric air compressor, how to choose an air compressor, why a compressor stops building pressure and pressure regulator picks for gas air compressors.

More buying guides