Best Sandpaper for Aluminum (2026)
Five sandpaper packs and rolls for aluminum, compared by grit range, sheet size, wet or dry use and backing.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallAceple 52-Pc Variety Pack9.7/10View on Amazon - 2
Best Single Grit3M 100-Grit Sandpaper9.6/10View on Amazon - 3
Best for Fine PolishingBitbbro 6-Roll Emery Cloth9.6/10View on Amazon - 4
Best Assorted Pack3M Assorted Grit 3-Pack9.6/10View on Amazon
Aluminum gums up paper that was made for wood, and a sheet that loads up stops cutting long before it wears out. The fix is paper with the right grit steps and a backing that stands up to wet or dry work, so each pass leaves a clean, even scratch pattern instead of a smeared one. This guide covers the best sandpaper for aluminum across packs and rolls, from coarse shaping sheets to fine polishing rolls, and shows which grit range fits each stage of the job.
GarageToolHQ earns a commission when you buy through links on this page, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall Aceple 52-Pc Variety Pack: 52 sheets in 80 to 400 grit, wet or dry, in 4.5 by 5.5 in quarter sheets that fit a block sander. Check price on Amazon
- Best Single Grit 3M 100-Grit Sandpaper: Five full-size 9 by 11 in sheets of 100 grit aluminum oxide for hand, block or power sanding. Check price on Amazon
- Best for Fine Polishing Bitbbro 6-Roll Emery Cloth: Six emery cloth rolls from 80 grit to the finest polishing grit, 118 ft in total, on tear-resistant cloth backing. Check price on Amazon
- Best Assorted Pack 3M Assorted Grit 3-Pack: 15 sheets in 100, 150 and 220 grit, full-size 9 by 11 in sheets for general sanding. Check price on Amazon
Picks for the garage

52Pcs Aluminum Oxide Sandpaper Variety Pack
A 52-sheet variety pack in 80 to 400 grit, in 4.5 by 5.5 in quarter sheets for wet or dry sanding of metal, wood, paint, epoxy, acrylic and plastic.
Pros
- Six grits from 80 to 400 in one pack
- 52 sheets: 8 each of 80, 100, 150 and 220 grit, 10 each of the two finest grits
- Wet or dry use with an anti-clogging coating
- Sheets wash clean for use again
Cons
- Quarter sheets at 4.5 by 5.5 in cover less area than full-size 9 by 11 in sheets
- No grit finer than 400 for a polished finish
- Fine grits work best with water added
- No warranty term is stated

3M Sandpaper, 100 Grit, 5 Sheets, 9 in x 11
Five full-size 9 by 11 in sheets of 100 grit aluminum oxide sandpaper for hand, block or power sanding of paint, wood and metal.
Pros
- Full-size 9 by 11 in sheets
- 100 grit medium aluminum oxide for general sanding
- Use by hand, on a block, or cut for a power sander
- Sands paint, wood and metal
Cons
- One grit only; no coarse or fine steps in the pack
- 5 sheets only, fewer than the variety packs here
- No wet or dry use stated
- No warranty term is stated

6 PCS Emery Cloth Roll Sandpaper with Dispenser
Six emery cloth rolls from 80 grit to the finest polishing grit, 1 in wide and 19.7 ft long each, on tear-resistant cloth backing with a pull-out dispenser.
Pros
- Six grits from 80 grit to the finest polishing grit
- 118 ft in total across 6 rolls
- Tear-resistant cloth backing at 18 to 45 mil thick
- Wet or dry use with a pull-out dispenser box
Cons
- 1 in wide rolls suit detail work, not large flat panels
- No full-size sheets in the box
- Each length must be cut from the roll before use
- No grit coarser than 80 for heavy stripping

3M Aluminum Oxide Sandpaper, 5 Sheets
A 3-pack of 15 full-size 9 by 11 in sheets in assorted 100, 150 and 220 grit aluminum oxide for general sanding of paint, wood and metal.
Pros
- Three grits: 100, 150 and 220
- 15 sheets in total, 5 per pack
- Full-size 9 by 11 in sheets
- Use by hand, on a block, or cut for a power sander
Cons
- No grit coarser than 100 for shaping
- No grit finer than 220 for a polished finish
- No wet or dry use stated
- Only 15 sheets in total, fewer than the 52 in the Aceple pack

80 Grit Wet Dry Sandpaper
Ten 9 by 11 in sheets of 80 grit wet or dry sandpaper in white fused alumina with a waterproof latex backing.
Pros
- 80 grit for coarse shaping and scratch removal
- Wet or dry use on a waterproof latex backing
- 99% alumina content with electro-coated grit
- Grit number marked on the back of each sheet
Cons
- One grit only; no medium or fine steps in the pack
- 10 sheets only, fewer than the variety packs here
- 80 grit leaves scratches that finer grits must remove
- Full-size sheets need cutting to fit a palm or block sander
Compared on paper
| Model | Shop Score | Grits | Sheets | Sheet size | Wet / dry | Warranty |
|---|---|---|---|---|---|---|
| Aceple 52-Pc Variety Pack | 9.7/10 | 80 to 400 | 52 | 4.5 x 5.5 in | Wet and dry | Not stated |
| 3M 100-Grit Sandpaper | 9.6/10 | 100 | 5 | 9 x 11 in | Not stated | Not stated |
| Bitbbro 6-Roll Emery Cloth | 9.6/10 | 80 grit to polishing grit | 6 rolls, 118 ft total | 1 in x 19.7 ft | Wet and dry | Not stated |
| 3M Assorted Grit 3-Pack | 9.6/10 | 100, 150, 220 | 15 | 9 x 11 in | Not stated | Not stated |
| AutKerige 80 Grit 10-Pc | 9.5/10 | 80 | 10 | 9 x 11 in | Wet and dry | Not stated |
Specs are the manufacturer’s ratings as listed, collected 19 November 2026. Grit ranges run from 80 grit for shaping to fine polishing grit across the five picks, and no pick here states a warranty term.
How the points were given
Each pick is scored on performance, build, value, safety and warranty, with the weights published on the How We Pick page. No pick here states a safety certification or a warranty term, so the safety and warranty parts of the score stay at zero for every pick, and the ranking turns on grit range, sheet size and backing.
| Product | Shop Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Aceple 52-Pc Variety Pack | 9.7 | 30 | 21 | 22 | n/a | 0 |
| 3M 100-Grit Sandpaper | 9.6 | 29 | 21 | 21 | n/a | 0 |
| Bitbbro 6-Roll Emery Cloth | 9.6 | 28 | 21 | 20 | n/a | 0 |
| 3M Assorted Grit 3-Pack | 9.6 | 28 | 20 | 20 | n/a | 0 |
| AutKerige 80 Grit 10-Pc | 9.5 | 27 | 20 | 20 | n/a | 0 |
Shop Scores range from a low of 9.2 to a high of 9.8, with each tool positioned by its weighted points proportionally, and more points always yields a higher score. Safety is scored for corded, cordless and air tools and for listings that state safety features; hand tools without either are scored on 90 points.
What the listings tell you
Five sandpaper listings sit behind this guide. All 5 state a grit. Four use aluminum oxide abrasive, and the fifth uses white fused alumina. Three state wet or dry use, and none states a warranty term. Two are 3M packs, one is a 52-sheet variety pack, one is a 10-sheet single-grit pack, and one ships as rolls with a dispenser. Grits run from 80 grit for shaping to fine polishing grit, sheet sizes from 4.5 by 5.5 in quarter sheets to full-size 9 by 11 in sheets, and one roll set totals 118 ft.
Buying guide: best sandpaper for aluminum
Grit steps for aluminum
Start coarse and step up through the grits, skipping no more than one grit in the sequence. The picks here run from 80 grit for shaping to fine polishing grit, with the Aceple pack covering 80 to 400 grit and the Bitbbro rolls covering the full range from shaping to polishing. A single-grit pack suits one stage only, so match the grit to the stage at hand.
Wet or dry
Three picks state wet or dry use: the Aceple pack, the AutKerige sheets and the Bitbbro rolls. Water suits the fine grits, and the Aceple listing notes that adding water for the higher grit works well for fine sanding. The two 3M packs state no wet or dry use.
Sheet size, rolls and cutting
Full-size sheets run 9 by 11 in, quarter sheets run 4.5 by 5.5 in, and the Bitbbro rolls run 1 in wide and 19.7 ft long. Every pick here can be cut to size: the 3M sheets cut for a power tool sander, the Aceple sheets cut to any size, the AutKerige sheets cut to the dimensions needed, and the Bitbbro rolls cut to the length needed. Cut a sheet to fit the block or palm sander before starting.
Backing and clogging
Backing decides how long a sheet lasts on aluminum. The Bitbbro rolls use tear-resistant cloth backing at 18 to 45 mil thick, the AutKerige sheets use a waterproof latex backing, and the Aceple pack carries an anti-clogging coating that keeps the grit cutting. The AutKerige sheets use an electro-coated layer that minimizes clogging and static buildup, and the Aceple sheets wash clean for use again.
For the sander behind the paper, see the types of electric sanders and the palm sander vs DA sander comparison.
Garage Fit Check
- Full-size 9 by 11 in sheets fit a sanding block; quarter sheets at 4.5 by 5.5 in fit a palm sander.
- The roll dispenser holds 118 ft of emery cloth in one box; cut only the length needed.
- Check the grit number on the back of each sheet before starting; the AutKerige sheets mark it there.
- Three picks state wet or dry use, so the same pack can sand aluminum wet or dry.
Wear eye protection with every air tool, use impact-rated sockets on impact wrenches, disconnect the air line before changing accessories, and finish lug nuts with a torque wrench to the vehicle's spec. See OSHA eye and face protection. Read our Safety Disclaimer.
FAQ: garage tools
What grit sandpaper should I use on aluminum?
Start at 80 grit for shaping and move through 100, 150 and 220 grit, then 400 grit for a fine finish; the Bitbbro rolls run finer still for polishing. The Aceple pack covers 80 to 400 grit, and the Bitbbro rolls run from 80 grit to the finest polishing grit.
Can I sand aluminum wet?
Yes, with the three picks that state wet or dry use: the Aceple pack, the AutKerige sheets and the Bitbbro rolls. Adding water for the higher grit works well for fine sanding, per the Aceple listing.
Does sandpaper clog on aluminum?
It can. The Aceple pack has an anti-clogging coating, the AutKerige sheets use an electro-coated layer that minimizes clogging, and the Aceple sheets wash clean for use again.
What size are the sheets?
The 3M and AutKerige sheets are 9 by 11 in, the Aceple sheets are 4.5 by 5.5 in quarter sheets, and the Bitbbro rolls are 1 in wide and 19.7 ft long each.
Can I cut sandpaper to fit my sander?
Yes. The 3M sheets can be cut to size for a power tool sander, the Aceple sheets can be cut to any size, the AutKerige sheets can be cut to the dimensions needed, and the Bitbbro rolls can be cut to the length needed.
Related: the air tools hub, the best sandpaper for car paint, the best sandpaper for woodworking and the best drill bits for aluminum. Also see our sandpaper grit guide. Also see our sandpaper grit chart. Also see our how to use wet sandpaper. Also see our how to use sandpaper. Also see our sandpaper sizes. Also see our how to clean sandpaper. Also see our best sandpaper for removing paint. Also see our best air compressor for air tools.




