Hole Saw Arbor Sizes: Matching Arbor to Saw
Match the arbor to your hole saw and your drill chuck: shank size, thread and saw range explained, with four arbors compared.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
LAIWEI 5PCS Hole Saw Kit - Drilling Tool9.7/10View on Amazon - 2
JTemgle Heavy Duty Hole Saw Arbor with 5pcs Center9.6/10View on Amazon - 3
JIECHENG Bi-metal Hole Saw Arbor Mandrel 3/8" Hex9.6/10View on Amazon - 4
SM Products 600634P Rapid Core Eject Arbor Hole9.5/10View on Amazon
A hole saw that will not mount, or a saw that wobbles the moment the drill spins up, usually points at the arbor, not the saw. Hole saw arbor sizes come down to matching the shank to your drill chuck and the thread to your hole saw, then checking the arbor covers your saw size. Get those matches right and the saw seats, locks and cuts clean; get a match wrong and the job stops before any hole is cut.
GarageToolHQ earns a commission when you buy through links on our product pages, at no extra cost to you. Read our affiliate disclosure.
Below: shank, thread, saw range and matching.

LAIWEI 5PCS Hole Saw Kit - Drilling Tool
A 5-piece kit with an A2 heavy duty arbor and an A4 small arbor, 2 4341 bits and a wrench, covering 14 to 360 mm hole saws with a lifetime replacement of defective items.
Pros
- Covers 14 to 360 mm hole saws
- A2 arbor fits 35 to 360 mm saws
- A4 arbor fits 14 to 200 mm saws
- Lifetime replacement of defective items
Cons
- A4 arbor covers saws only to 200 mm
- Two arbors to store and keep track of
- No inch shank size is stated
- No storage case is included

JTemgle Heavy Duty Hole Saw Arbor with 5pcs Center
A 1/2-inch hex shank arbor with 5 center drill bits and a hex wrench, fitting 1-1/2-inch to 12-inch hole saws with a lock mechanism.
Pros
- Fits 1-1/2 in to 12 in hole saws
- 1/2 in hex shank grips without slipping
- 5 center drill bits included
- High-grade carbon steel build
Cons
- Fits nothing under 1-1/2 in
- No warranty term is stated
- No pilot bit sizes are stated
- No storage case is included

JIECHENG Bi-metal Hole Saw Arbor Mandrel 3/8" Hex
A 3/8-inch hex shank arbor for 1-1/4-inch to 10-inch bi-metal hole saws, with standard and extended HSS pilot bits and a hex wrench.
Pros
- Fits 1-1/4 in to 10 in bi-metal saws
- Works with 3/8 in or 1/2 in chucks
- Standard and extended pilot bits included
- HSS bits with split point tips
Cons
- Fits nothing over 10 in
- Fits nothing under 1-1/4 in
- Pilot bits come in one diameter, 1/4 in
- No warranty term is stated

SM Products 600634P Rapid Core Eject Arbor Hole
A Hex 10-18 UNF arbor for Rapid Switch and Rapid Core Eject hole saws, with immediate plug removal.
Pros
- Rapid Core Eject plug removal
- Smooth cuts even at low speeds
- Works with Rapid Switch and Rapid Core Eject saws
- 0.49 lb
Cons
- Fits only Rapid Switch and Rapid Core Eject saws
- No hole saw size range is stated
- No pilot bit comes with the arbor
- No storage case is included
Hole saw arbor sizes: shank, thread and saw range
Three parts decide the fit. The shank is the end that goes in the drill chuck: the JTemgle arbor uses a 1/2-inch hex shank, the JIECHENG arbor uses a 3/8-inch hex shank, and the Laiwei kit uses an 11 mm shank on its A2 arbor and a 9 mm shank on its A4 arbor. The thread holds the saw: the Spyder arbor uses a Hex 10-18 UNF thread. The JTemgle arbor adds a lock mechanism and the Laiwei kit a locking pin design to keep the saw in place. The saw range is the size of hole saw the arbor accepts: the JTemgle arbor fits 1-1/2-inch to 12-inch hole saws, the JIECHENG arbor fits 1-1/4-inch to 10-inch bi-metal hole saws, and the Laiwei kit covers 14 to 360 mm hole saws.
The pilot bit centers the saw and starts the cut. The JTemgle arbor comes with 5 center drill bits, the Laiwei kit comes with 2 4341 bits, and the JIECHENG arbor comes with a 1/4-inch by 3-inch standard bit and a 1/4-inch by 4-inch extended bit.
| Arbor | Shank | Hole saw range |
|---|---|---|
| Laiwei 5-Piece Kit | 11 mm (A2), 9 mm (A4) | 14 to 360 mm |
| JTemgle Hole Saw Arbor | 1/2 in hex | 1-1/2 in to 12 in |
| JIECHENG Bi-Metal Arbor | 3/8 in hex | 1-1/4 in to 10 in |
| Spyder 600634P Arbor | Not stated | Rapid Switch and Rapid Core Eject saws |
The Spyder arbor lists a Hex 10-18 UNF thread and no shank size, so check the thread against your saw before ordering.
The arbors in this guide
Each arbor below handles a different part of the match: shank size, saw range or pilot bit.
How to match an arbor to your saw
- Read the saw range first. Match the arbor to the saws you plan to run: JTemgle covers 1-1/2-inch to 12-inch saws, JIECHENG covers 1-1/4-inch to 10-inch bi-metal saws, and Laiwei covers 14 to 360 mm saws.
- Match the shank to your chuck. The JIECHENG 3/8-inch hex shank works with 3/8-inch or 1/2-inch chucks.
- Match the thread to your saw. The Spyder arbor fits Rapid Switch and Rapid Core Eject hole saws on its Hex 10-18 UNF thread.
- Pick the pilot bit. Use the 1/4-inch by 3-inch standard bit for everyday holes and the 1/4-inch by 4-inch extended bit for deeper hole saws.
- Lock the saw on the arbor. The JTemgle lock mechanism and the Laiwei locking pin hold the saw in place.
Read the manual before first use, wear eye protection, keep the work area clear and ventilated, and stay within every stated rating. Read our Safety Disclaimer.
FAQ: garage tools
What size arbor do I need for my hole saw?
Match the thread and the saw range. The JTemgle arbor fits 1-1/2-inch to 12-inch hole saws, the JIECHENG arbor fits 1-1/4-inch to 10-inch bi-metal hole saws, and the Laiwei kit covers 14 to 360 mm hole saws.
Will a 3/8-inch shank arbor fit a 1/2-inch chuck?
Yes. The JIECHENG arbor has a 3/8-inch hex shank and the maker says it works with 3/8-inch or 1/2-inch chucks.
What is the difference between an A2 and an A4 arbor?
The Laiwei kit holds both: the A2 heavy duty arbor has an 11 mm shank and fits 35 to 360 mm hole saws, and the A4 small arbor has a 9 mm shank and fits 14 to 200 mm hole saws.
Do I need a different arbor for large hole saws?
Check the range on the arbor you own. The JTemgle arbor runs to 12 inches, the JIECHENG arbor runs to 10 inches, and the Laiwei A2 arbor runs to 360 mm.
What does the pilot bit do?
The pilot bit centers the saw and starts the cut. The JIECHENG maker says its split point tips help start faster, reduce walking and improve accuracy.
Related: best hole saw for wood, best hole saw for metal, step drill bit sizes and our engine and shop equipment hub.




