2 Ton Floor Jack with Stands (2026): 5 Garage Combos Compared

Compare the picks

*Specifications are manufacturer rated, as published on each listing and collected 13 October 2026.

How we scored them

Each combo is scored out of 10 on performance, build, value, safety and warranty, with the weights published on our How We Pick page. Stated ASME safety standards earn full safety points; an internal overload bypass valve without an ASME standard earns a modest baseline.

Scores run from 9.2 to 9.8: each product’s point total is placed on that range, so more points always means a higher score.

What the listings tell you

We examined five 2 ton floor jack with stands listings. All five state a 2 ton (4,000 lb) load capacity and include two ratchet jack stands alongside a hydraulic trolley jack. All five list built-in overload protection valves or safety bypass systems. Only one listing (TCE) states compliance with ASME safety standards, and only that same listing publishes a concrete warranty term (a 2-year limited warranty in bullets, though contradicted by 1 year in its spec table). Three listings show internal contradictions between bullets and spec tables regarding maximum lifting height or weight, and two listings direct buyers to contact the seller directly for warranty information without stating a term.

Buying guide: 2 ton floor jack with stands

Understanding 2 ton capacity

A 2 ton rating equals 4,000 lb of hydraulic lifting capacity. In a home workshop, a floor jack lifts one corner or one axle of a vehicle at a time rather than hoisting the entire vehicle off the ground. For standard passenger cars, hatchbacks, crossovers and sedans, a 2 ton capacity offers a comfortable margin for weekend maintenance jobs. However, full-size pickup trucks, commercial vans and large heavy SUVs exceed safe working thresholds for compact 2 ton units, as several makers explicitly note on their listings.

Saddle height and low profile clearance

Before rolling a jack under a car, check the collapsed saddle height against your vehicle’s lowest ground clearance point. The picks here feature minimum heights from 5.1 in to 5.5 in. A low profile design allows the trolley arm to slide cleanly under unibody rocker panels and reach factory pinch weld points without catching bodywork. Maximum lifting heights on these compact trolley jacks range from 13 in to 13.4 in (with one maker stating 13-3/8 in), which provides ample room to remove wheels or service brakes on passenger cars.

Ratchet stands and solid support

Never rely on a hydraulic jack to hold a vehicle while you work. Hydraulic pressure can bypass or leak down over time. The two jack stands included in each combo use a multi-position sawtooth ratchet bar and locking pawl mechanism, adjusting between 10-13/16 in and 17 in. A wide pyramid foot base distributes the vehicle weight evenly across concrete garage floors. Once raised, lower the vehicle slowly onto the locked stands and verify stability before beginning your job.

Overload protection and ASME standards

Hydraulic trolley jacks incorporate internal safety bypass valves or overload protection mechanisms designed to prevent the ram from raising loads beyond its 4,000 lb rating. Beyond built-in valves, look for compliance with ASME safety standards (such as ASME PASE for portable automotive service equipment). Third-party safety standards verify structural durability, stability under load and pressure valve reliability.

Locating owner manual lift points

Always consult your vehicle owner manual to pinpoint designated factory lift points and reinforced pinch weld notches before positioning the saddle. Placing a jack under floor pans, suspension arms or oil pans risks severe vehicle damage and unstable lifting. For proper long-term tool care, review our guide to floor jack maintenance, and learn how to use a floor jack safely before tackling your first job. If you drive a lowered sedan, also explore what is a low profile floor jack.

Garage Fit Check

• Clearance check: Measure your vehicle’s pinch weld clearance to confirm it clears the minimum collapsed saddle height (5.1 in on DNA Motoring and PM PERFORMOTOR, 5-1/4 in on TCE and BIG RED T82001, or 5.5 in on BIG RED T82001S).
• Lift reach: Verify that a 13 in to 13-3/8 in maximum jack lift and 16-9/16 in to 17 in stand extension provide sufficient tire clearance for your passenger car jobs.
• Floor surface: Ensure you operate exclusively on solid, level concrete ground; never place trolley casters or pyramid stand feet on dirt, gravel or sloped driveways.
• Shop storage: If storage space is tight, the BIG RED T82001S packs into an included blow mold case, while open trolley models measure 31.3 x 9.4 x 7 in with listed weights of 18.5 lb, 20.4 lb or 14.38 kg.

Frequently Asked Questions

Do I need a floor jack?

Yes, if you perform basic home garage maintenance such as swapping seasonal tires, changing brake pads or inspecting suspension components. A hydraulic floor jack provides controlled, rapid lifting compared to flimsy roadside emergency scissor jacks. However, a floor jack is strictly a lifting device; you must always support the vehicle on rated jack stands before reaching beneath.

How much floor jack do I need?

For typical passenger cars, sedans and compact crossovers, a 2 ton (4,000 lb) floor jack is well matched because you are only lifting one end or corner of the vehicle at a time. If you drive a half-ton pickup truck, large three-row SUV or commercial van, you should step up to a heavier-duty floor jack with higher lifting clearance.

How to choose floor jack?

Focus on key specifications: load capacity (matched to vehicle weight), minimum saddle height (to clear low rocker panels), maximum lift height (enough to raise wheels clear of the floor) and recognized safety standards like ASME. Choosing a combo that bundles a trolley jack with matching ratchet stands ensures your lifting and support equipment are properly paired.

What does a low profile floor jack mean?

A low profile floor jack features a low-slung chassis and a collapsed saddle height (such as 5.1 in in the picks here). This geometry allows the jack to roll deep beneath low-clearance vehicles, lowered sports coupes or cars with aerodynamic body trim without contacting the bodywork.

Do I need a floor jack to change oil?

You can use a floor jack and jack stands to raise the vehicle for oil changes, provided you lower the car onto locked stands on level concrete and chock the remaining wheels. Alternatively, drive-on car ramps offer another option. Never reach under a car supported solely by a hydraulic jack to access an oil drain plug or filter.

Related: our jacks and stands hub, our guide on how to use a floor jack safely, our overview of what is a low profile floor jack, floor jack maintenance, what size floor jack do i need, what size jack stands do i need, how to bleed a floor jack, how many jack stands do you need, floor jack types, steel vs aluminum floor jack, best jack stands, best low profile floor jack, best floor jack for cars, car ramps vs jack stands, floor jack vs bottle jack, best small floor jack, best low profile jack stands, why is my floor jack not lifting, floor jack vs trolley jack, best wheel chocks and how to use wheel chocks.