Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Types of Hole Saws: Bimetal and Carbon Steel

Bimetal and carbon steel hole saws compared by material and job, with kits that cover softwood, plywood, PVC and thin metal.

Types of Hole Saws: Bimetal and Carbon Steel
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Milwaukee 49-22-4185 All Purpose Professional IceMilwaukee 49-22-4185 All Purpose Professional Ice9.7/10View on Amazon
  2. 2dashap 13PCS Bi-Metal Hole Saw Kit with Drilldashap 13PCS Bi-Metal Hole Saw Kit with Drill9.6/10View on Amazon
  3. 317-Piece Hole Saw Kit, Includes 13 Sizes17-Piece Hole Saw Kit, Includes 13 Sizes9.6/10View on Amazon
  4. 4HIDOTOL 8PC Hole Saw Kit 1" to 2-1/8"(25-54mm)HIDOTOL 8PC Hole Saw Kit 1" to 2-1/8"(25-54mm)9.6/10View on Amazon

A round hole in a shelf board, a speaker cutout in a door panel, a cable pass-through in a plywood wall: each job starts with a hole saw on a drill. Types of hole saws come down to tooth material and what the saw is made to cut. A bi-metal saw handles wood and thin metal, and a heat-treated carbon steel saw covers softwood, plywood and PVC. Pick the tooth for the material, match the size to the hole, and the saw does the rest.

GarageToolHQ earns a commission when you buy through links on our product pages, at no extra cost to you. Read our affiliate disclosure.

Below: the main types, how to match a saw to the material, and the kits that cover the common sizes.

Milwaukee 49-22-4185 All Purpose Professional Ice

Milwaukee 49-22-4185 All Purpose Professional Ice

Milwaukee9.7/10 Shop Score
i
The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 28-piece professional kit with ice-hardened Matrix II bi-metal teeth, made in the United States.

Pros

  • Ice-hardened teeth, claimed to last up to 50% longer than the competition
  • Matrix II bi-metal teeth for greater durability
  • Deeper gullets for fast chip removal
  • Made in the United States

Cons

  • No warranty term is stated
  • Kit measures 9.5 by 16.5 by 4.75 inches
  • More saw than one small job needs
  • Cutting depth is not stated
dashap 13PCS Bi-Metal Hole Saw Kit with Drill

dashap 13PCS Bi-Metal Hole Saw Kit with Drill

dashap9.6/10 Shop Score
i
The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 13-piece bi-metal set, 3/4 inch to 3 inches, cutting depth of 20mm, for wood, aluminum, thin metal and plastic.

Pros

  • Bi-metal construction with a zinc alloy, anti-corrosion surface
  • Cutting diameters from 3/4 inch to 3 inches
  • Cutting depth of 20mm
  • Enlarged elliptical holes for chip removal and cooling

Cons

  • No warranty term is stated
  • Do not use on concrete, tile or strong metal
  • Each saw comes in its own package rather than a shared case
  • A 13-saw set is more than one small job needs
17-Piece Hole Saw Kit, Includes 13 Sizes

17-Piece Hole Saw Kit, Includes 13 Sizes

shihan-xingyu9.6/10 Shop Score
i
The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 17-piece kit with 13 hole saws from 3/4 inch to 5 inches, plus arbors, drill bits and a hex key, in a storage case, for softwood, plywood and PVC.

Pros

  • 13 sizes from 3/4 inch to 5 inches
  • Heat-treated carbon steel with a rust-resistant coating
  • Arbors, drill bits and a hex key included
  • Storage case with a slot for each tool

Cons

  • Designed for softwood, thin PVC and thin plywood, with no metal cutting stated
  • Carbon steel teeth rather than bi-metal
  • No cutting depth is stated
  • A full 13-saw kit is more than one small job needs
HIDOTOL 8PC Hole Saw Kit 1" to 2-1/8"(25-54mm)

HIDOTOL 8PC Hole Saw Kit 1" to 2-1/8"(25-54mm)

HIDOTOL9.6/10 Shop Score
i
The Shop Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An 8-piece kit with 5 saws from 1 inch to 2-1/8 inches, plus a mandrel, drill bit and hex key, in a case, for soft wood, plywood and PVC board.

Pros

  • Heat-treated carbon steel with a black coating to resist rust and wear
  • Tooth design for precise, smooth holes
  • Mandrel, drill bit and hex key included
  • Case keeps the 8 pieces together

Cons

  • 5 saws only, from 1 inch to 2-1/8 inches
  • Made for soft wood, plywood and PVC board, with no metal cutting stated
  • No cutting depth is stated
  • Covers holes only up to 2-1/8 inches

Types of Hole Saws: Bimetal and Carbon Steel

Type Tooth and body Cuts Watch for
Bi-metal Bi-metal teeth Wood, thin metal, aluminum, plastic Coolant or water can help on metal
Carbon steel Heat-treated carbon steel, rust-resistant coating Softwood, plywood, PVC, plasterboard No metal cutting is stated for these kits

Bi-metal is the all-round tooth here. Milwaukee pairs Matrix II bi-metal teeth with ice hardening and claims up to 50% longer life than the competition, while the dashap set uses bi-metal construction with a zinc alloy surface and an enlarged hole that clears chips and cools the cut. The dashap set is listed for wood, aluminum, thin metal and plastic.

The dashap set is the bi-metal set with the widest stated material range: wood, aluminum, thin metal and plastic, with cutting diameters from 3/4 inch to 3 inches and a cutting depth of 20mm. Carbon steel is the light-duty tooth: both carbon steel kits here are made for softwood, plywood and PVC, with a rust-resistant coating.

How to Pick the Right Hole Saw for the Job

Start with the material, then the size, then the kit. A bi-metal saw covers wood and thin metal, and a carbon steel saw covers softwood, plywood and PVC. Kits in this guide cover 3/4 inch to 5 inches, 3/4 inch to 3 inches, and 1 inch to 2-1/8 inches.

Check the cutting depth before a deep cut: a cutting depth of 20mm is stated for the dashap set, so check the maker’s specs first for the rest.

Check what rides along with the saws. The 17-piece, 13-piece and 8-piece kits include arbors or mandrels, drill bits and a hex key. Match the arbor to the saw with the hole saw arbor sizes guide.

Wear protective goggles and gloves, as the dashap maker advises; on metal, a coolant or water can help prevent overheating.

Garage safety

Read the manual before first use, wear eye protection, keep the work area clear and ventilated, and stay within every stated rating. Read our Safety Disclaimer.

Hole Saw Kits for the Garage

Once the tooth material is settled, the kit decides whether the size on hand matches the hole on the job. These kits are ranked by how well each one covers the common sizes and materials.

FAQ: garage tools

What is the difference between a bi-metal hole saw and a carbon steel hole saw?

A bi-metal saw pairs a hard tooth edge with a flexible body. The dashap bi-metal set is listed for wood, thin metal, aluminum and plastic, while the carbon steel sets here are made for softwood, plywood, PVC, plastic board and plasterboard.

Can a hole saw cut metal?

Yes, with the right tooth. The dashap bi-metal set is listed for thin metal and aluminum. The carbon steel sets here are made for softwood, plywood and PVC, with no metal cutting stated. The dashap set states not to use it on concrete, tile or strong metal.

What sizes do hole saw kits cover?

Kits in this guide cover 3/4 inch to 5 inches with 13 saws, 3/4 inch to 3 inches with 13 saws, and 1 inch to 2-1/8 inches with 5 saws. Measure the hole first.

Do hole saw kits come with the arbor and drill bit?

The 17-piece, 13-piece and 8-piece kits in this guide include arbors or mandrels, drill bits and a hex key, so each saw mounts on a drill with no extra arbor to buy.

How deep can a hole saw cut?

A cutting depth of 20mm is stated for the dashap set. No cutting depth is stated for the rest of the kits in this guide, so check the maker’s specs first for a deep cut.

Related: best hole saw kits, the hole saw picks for metal, the hole saw picks for wood and the engine and shop equipment hub.

More buying guides

Engine and Shop Equipment ·

AC Compressor Oil Capacity: How Much to Add

AC compressor oil capacity is set by the vehicle and compressor, not by the bottle: check the service manual, match the PAG viscosity, and…

Engine and Shop Equipment ·

Manual Truck Tire Changers: Types and Uses

A manual truck tire changer breaks the bead and mounts truck tires by hand, and the right pick starts with matching its rim range…