Best Low-Profile Floor Jack: 6 Picks That Slide Under Low Cars
Six low-profile floor jacks compared by lowest saddle height, top lift, capacity, pump, weight, stated safety standard and warranty, for lowered and sports cars.
On this page
Top picks at a glance
As an Amazon Associate we earn from qualifying purchases.
- 1
Best OverallAV Steel AV-300102F9.7/10View on Amazon - 2
Best Aluminum HybridJack Boss AS830011L9.7/10View on Amazon - 3
LightestYELLOW JACKET 1.5 Ton9.6/10View on Amazon - 4
Lowest Startantlevix ALFJ3L019.5/10View on Amazon - 5
AV Steel Low Profile Floor Jack 2.5 TonView on Amazon - 6
Pro-Lift Low Profile Floor Jack Color GreyView on Amazon - 7
ARCAN 3-Ton Aluminum Low Profile Floor JackView on Amazon - 8
VEVOR Low Profile Floor Jack 2 TonView on Amazon
A standard floor jack starts around 5 inches tall, which will not fit under a lowered car, a sports car or many sedans with low side skirts. A low-profile jack starts at 4 inches or less. This guide compares six by their lowest and highest saddle height, capacity, pump, weight, stated safety standard and warranty.
GarageToolHQ earns a commission when you buy through links on this page, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall AV Steel AV-300102F: 3 ton from 3-1/8 in up to 19.87 in, dual pistons, stated ASME PASE compliance and a 12 month warranty. Check price on Amazon
- Best Aluminum Hybrid Jack Boss AS830011L: 3 ton aluminum and steel at 58.5 lb, 3-15/16 to 18-5/16 in, stated ASME PASE compliance. Check price on Amazon
- Lightest YELLOW JACKET 1.5 Ton: 31.5 lb aluminum and steel with a 3.5 in minimum, for cars under 1.5 tons at the lift point. Check price on Amazon
- Lowest Start antlevix ALFJ3L01: Starts at 2.9 in and reaches 19.8 in, the widest range here, with a 3 ton rating. Check price on Amazon
The picks
AV Steel Low Profile Floor Jack 3 Ton (6600 lbs)
A 3 ton steel low-profile floor jack that starts at 3-1/8 in and lifts to 19.87 in with a dual piston pump.
Pros
- 3-1/8 in start slides under most lowered cars
- 19.87 in top lift reaches SUV lift points too
- States compliance with ANSI/ASME PASE
- 12 month warranty and a 360 degree saddle
Cons
- Weight not stated
- All steel, heavy to carry
- Table lists a 19.69 in minimum height, clearly an error
- Compliance is self-declared, not third-party certified
Jack Boss 3 Ton Low Profile
A 3 ton aluminum and steel racing-style floor jack with a 3-15/16 to 18-5/16 in range and a dual piston pump.
Pros
- Aluminum body keeps a 3 ton jack to 58.5 lb
- States ANSI/ASME PASE compliance and a 1.5x overload check
- Dual piston quick lift
- Rubber saddle and two-piece handle
Cons
- 3-15/16 in start is the highest minimum here
- Pricier than the steel jacks
- 1 year limited warranty
- Compliance is self-declared
YELLOW JACKET Floor Jack 1.5 Ton Hydraulic Low
A 1.5 ton aluminum and steel floor jack weighing 31.5 lb, with a 3.5 to 14 in range and dual piston pump.
Pros
- 31.5 lb, the lightest jack here
- 3.5 in minimum height
- Dual piston pump and overload protection
- 1 year warranty
Cons
- 1.5 ton capacity, not for SUVs or trucks
- 14 in top lift is low for taller cars
- Safety standard claim does not name ASME PASE
- Small saddle and frame
SATA 3-Ton (6,600 lb) Heavy-Duty Steel Floor Jack
A 3 ton steel floor jack with a dual piston pump, overload valve and slow-release lowering, lifting to 19-1/8 in.
Pros
- 19-1/8 in top lift
- Overload valve and controlled slow release
- Dual piston pump
- States a 1.5x overload check on every unit
Cons
- Minimum height given three ways: 2-11/16, 2.13 and 3-3/4 in
- 70 lb, the heaviest here
- Warranty listed only as "1"
- Safety claim does not name ASME PASE
VEVOR 2.5 Ton Low Profile Heavy-Duty Steel Racing
A 2.5 ton steel low-profile jack with a 3.35 to 14.96 in range, single piston pump and 31.5 in two-piece handle.
Pros
- Names its standards: ASME PALD-2014, CE and UKCA
- 3.35 in minimum height
- Light at 13.6 kg (about 30 lb) for a steel jack
- Detachable 360 degree saddle and foam handle bumper
Cons
- Single piston pump, more strokes to lift
- No warranty term stated
- 2.5 ton capacity
- 14.96 in top lift
Heavy-Duty 3-Ton (6,600 lbs)
A 3 ton steel low-profile jack with a dual piston pump and the widest range here, 2.9 to 19.8 in.
Pros
- 2.9 in minimum, the lowest stated here
- 19.8 in maximum
- 3 ton capacity with dual piston pump
- Wide base and rubber saddle
Cons
- 90 day limited warranty
- No safety standard stated
- 62 lb
- Newer brand with little track record
More options to compare
AV Steel Low Profile Floor Jack 2.5 TonCheck price on Amazon
Pro-Lift Low Profile Floor Jack Color GreyCheck price on Amazon
ARCAN 3-Ton Aluminum Low Profile Floor JackCheck price on Amazon
VEVOR Low Profile Floor Jack 2 TonCheck price on Amazon
Compare the picks
| Model | Shop Score | Capacity | Min height | Max height | Material | Pump | Weight | Safety standard (stated) | Warranty |
|---|---|---|---|---|---|---|---|---|---|
| AV Steel AV-300102F | 9.7/10 | 3 ton | 3-1/8 in | 19.87 in | Steel | Dual piston | Not stated | ANSI/ASME PASE | 12 months |
| Jack Boss AS830011L | 9.7/10 | 3 ton | 3-15/16 in | 18-5/16 in | Aluminum and steel | Dual piston | 58.5 lb | ANSI/ASME PASE | 1 year limited |
| YELLOW JACKET 1.5 Ton | 9.6/10 | 1.5 ton | 3.5 in | 14 in | Aluminum and steel | Dual piston | 31.5 lb | ANSI/ASME (unspecified) | 1 year |
| SATA 3-Ton Steel | 9.6/10 | 3 ton | 3-3/4 in (text) | 19-1/8 in | Steel | Dual piston | 70 lb | Exceeds ANSI/ASME (unspecified) | Unclear (“1”) |
| VEVOR S385 | 9.6/10 | 2.5 ton | 3.35 in | 14.96 in | Steel | Single piston | 13.6 kg (30 lb) | ASME PALD-2014, CE, UKCA | Not stated |
| antlevix ALFJ3L01 | 9.5/10 | 3 ton | 2.9 in | 19.8 in | Steel | Dual piston | 62 lb | Not stated | 90 days limited |
Specifications are manufacturer rated, as published on each listing and collected 5 October 2026. Where a listing gives conflicting figures, the text value is shown and the conflict is noted.
How we scored them
Each jack is scored out of 10 on performance, build, value, safety and warranty, with the weights published on our How We Pick page. A stated ASME PASE or PALD compliance earns most of the safety points; a general “ANSI/ASME” claim earns partial credit; no claim earns zero.
| Product | Shop Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| AV Steel AV-300102F | 9.7 | 33 | 21 | 20 | 8 | 2 |
| Jack Boss AS830011L | 9.7 | 32 | 22 | 19 | 8 | 2 |
| YELLOW JACKET 1.5 Ton | 9.6 | 27 | 22 | 20 | 5 | 2 |
| SATA 3-Ton Steel | 9.6 | 30 | 21 | 20 | 5 | 1 |
| VEVOR S385 | 9.6 | 29 | 20 | 21 | 8 | 0 |
| antlevix ALFJ3L01 | 9.5 | 33 | 20 | 20 | 0 | 1 |
Scores run from 9.2 to 9.8: each product’s point total is placed on that range, so more points always means a higher score.
What the listings tell you
We read 14 low-profile jack listings. All stated capacity and a lift range. Five named a safety standard, and only 5 gave a clear warranty term; others said “contact the seller” or gave a bare number. Two listings share the same rating pool across colors. Several gave conflicting minimum heights between the title, the text and the specification table.
Buying guide: low-profile floor jacks
Measure your car first
Measure from the floor to the jacking point you will use, usually the front crossmember or the pinch weld, with the car on its tires. The jack’s minimum height must be lower than that, with room for a rubber pad. Many lowered cars need under 3.5 in.
Top lift matters too
Some low-profile jacks stop at 14 to 15 in, enough for a car but not to get an SUV’s wheels off the ground. If you own both, pick one that reaches 18 in or more.
Steel, aluminum or hybrid
Steel jacks are cheaper and heavier, 60 to 70 lb at 3 tons. Aluminum and hybrid jacks cut weight sharply but cost more. If the jack stays in the garage, weight matters less than range.
Dual piston pumps
A dual piston pump raises the saddle to the car in fewer strokes, handy when you lift often.
The jack only lifts
Every jack here is for lifting. Once the car is up, set it on jack stands before you work under it. See the best jack stands.
A jack is for lifting, not holding. Never work under a vehicle supported only by a jack: set it on rated jack stands, on solid, level ground, at the manufacturer's lift points, chock the wheels, and give the car a firm shake before you go under. Read our Safety Disclaimer.
Frequently Asked Questions
What is considered a low-profile floor jack?
A jack whose saddle starts at about 4 in or less. Standard floor jacks start around 5 to 5.5 in. The jacks here start between 2.9 and 3-15/16 in.
Is a low-profile jack good for trucks and SUVs?
Only if it also lifts high enough. Look for a top lift of 18 to 20 in and a 3 ton rating. A 14 in jack will not get most SUV wheels off the ground.
What does ASME PASE mean on a jack?
ASME PASE is the American safety standard for portable automotive service equipment, including jacks and stands. On these listings it is a manufacturer’s statement of compliance, not a third-party certification.
Is an aluminum floor jack worth it?
If you carry it, yes. A 3 ton aluminum and steel jack here weighs 58.5 lb against 62 to 70 lb for steel, and the 1.5 ton hybrid weighs 31.5 lb.
Can I leave a car on a floor jack?
No. Hydraulic jacks can creep down or fail. Put rated jack stands under the car before you work on it.
Related: the best floor jack under $200, the best jack stands, the best car lift for a low ceiling, our jacks and stands hub and our garage safety notes. Also see our best floor jack under 500. Also see our car ramps cheap. Also see our best aluminum floor jack 3 ton. Also see our best floor jack for cars. Also see our wheels for mechanic creeper. Also see our floor jack for wood floors. Also see our floor jack vs trolley jack. Also see our what is a low profile floor jack. Also see our steel vs aluminum floor jack. Also see our how to use a floor jack safely. Also see our what size floor jack do i need. Also see our why is my floor jack not lifting. Also see our how to bleed a floor jack. Also see our how many jack stands do you need. Also see our what size jack stands do i need. Also see our floor jack vs bottle jack. Also see our car ramps vs jack stands. Also see our best floor jack for trucks. Also see our best aluminum floor jack. Also see our best jack stands for trucks. Also see our best low profile jack stands. Also see our best car ramps for oil changes. Also see our best low profile car ramps. Also see our best bottle jack for trucks. Also see our best wheel chocks. Also see our best heavy duty floor jack. Also see our how to use wheel chocks. Also see our best car ramps under 50. Also see our best mechanic creeper under 50. Also see our what is bottle jack. Also see our best bottle jack under 50. Also see our best small floor jack. Also see our what are wheel chocks. Also see our how many wheel chocks do i need. Also see our floor jack types. Also see our heavy duty wheel dolly for trucks. Also see our floor jack alternative. Also see our car ramps with jacks built in. Also see our floor jack maintenance. Also see our best low profile mechanics creepers. Also see our best 3 ton jack stands. Also see our 2 ton floor jack with stands. Also see our bottle jack maintenance. Also see our car maintenance ramps pros and cons. Also see our best wheel chocks for travel trailer. Also see our bottle jack vs scissor jack. Also see our powerbuilt all-in-one review. Also see our creeper vs mechanic mat. Also see our padded vs molded mechanic creeper. Also see our plastic vs metal car ramps. Also see our pin type vs ratchet jack stands. Also see our best jack stands for lifted trucks. Also see our best floor jack for lifted trucks. Also see our blackhawk b6350 review. Also see our best wheel chocks for steep driveway. Also see our air jack vs bottle jack. Also see our rubber vs poly wheel chocks. Also see our best wheel chocks under 30. Also see our best car ramps for pickup trucks. Also see our best floor jack for sports cars. Also see our low profile vs standard floor jack. Also see our best car ramps for lowered cars. Also see our best floor jack for low clearance cars. Also see our steel vs plastic mechanic creeper. Also see our best wheel chocks under 40. Also see our best floor jack for suv. Also see our best floor jack for garage floor. Also see our best wheel chocks for motorcycles. Also see our best emergency jack for flat tires. Also see our best portable car jack kit under 100. Also see our jack stands vs wheel chocks. Also see our best mechanic creeper for brake jobs. Also see our low profile vs standard jack stands. Also see our best motorcycle lift jack under 150. Also see our car ramps vs wheel chocks. Also see our best bottle jack for suv. Also see our bottle jack vs hi lift. Also see our best wheel chocks for suv. Also see our aluminum vs steel creeper. Also see our magnetic vs hook work light. Also see our heavy duty vs standard jack stands. Also see our heavy duty vs standard floor jack. Also see our best wheel chocks for pickup trucks. Also see our best mechanic creeper for gravel driveway. Also see our electric vs hydraulic car jack. Also see our best wire brush for welding. Also see our best jack stands for low cars. Also see our best mechanic creeper with headrest. Also see our air jack vs floor jack. Also see our steel vs aluminum wheel chocks. Also see our rubber vs aluminum jack pads. Also see our best jack stands for uneven ground. Also see our best wheel chocks for garage floor. Also see our best car ramps for steep driveway. Also see our best floor jack for oil changes. Also see our best wheel chocks under 25. Also see our best wheel chocks for motorcycles under 80. Also see our best small floor jack under 50. Also see our bottle jack short. Also see our jack stand jack all in one. Also see our motorcycle ramps vs car ramps. Also see our best wheel chocks for gravel driveway. Also see our best jack stands for toyota tundra. Also see our best floor jack for toyota 4runner. Also see our best jack stands for home garage. Also see our hydraulic vs ratcheting wheel dolly.
